similar to: Is soekris good?

Hi All, I have a Soekris 4801 running Asterisk and I tried to add a X100P FXO card only to find that the Soekris will not boot with the card installed. The LEDs flash for a second and then nothing, it does not boot. I've tried 2 different X100p cards, both of which work in a regular desktop system, and still have no luck. I tried a different Soekris 4801 with no luck. I've also tried a

Hi group, i'm brand new and i would like to ask about soekris hardware. I read along the web but i have some doubts that i think can be solved here. My question are the following: 1) does the Digium TDM400P fit in the soekris box with a 4801 SBC or a bigger box is needed? Any suggestions about where to pick up another box? 2) does the Digium TDM100P (already discontinued) fits fine in a

Hi, I am still struggling with the E1 card!!!! Does anyone has some experience with sangoma E1 card? I have this card in soekris net 4801. First I was runnig it with deactivated DMA and I was receiving overruns (even with no channels in use). Then I enabled the DMA. Now I have the overruns only during a call. When I'm using more than one channel, the voice is stuttering and the delay is very

Hi all I have just got a P2000w and experience several problems. Hopefully there is someone out there that has got it working. I saw it on Cebit and the person demonstrating it there told me that it was connected to an Asterisk server on the stand -so it should work. Problem 1: it does not register correctly It get lots of messages like this: Jun 26 19:45:19 NOTICE[1107585968]: chan_sip.c:5630

Hi. I am trying to use EXTLINUX 3.08 to boot a Soekris net4801 from a CompaqFlash card. BIOS reports the CF card as the first master harddisk. During boot/load the loader hangs after this output: EXTLINUX 3.08 2005-05-19 PXELINUX and LILO works fine on the same setup It this a general problem with Soekris/net4801 and EXTLINUX? Regards Johan Linn?r

Hello, I found serveral discussions about the Zyxel ePhone Prestige P2000W and the WiSip from Pulver Innovations on this mailings list but still have some questions: 1) are there other affordable wireless SIP Phones on the market? I haven't seen or found anything else till now ... 2) is p2000w and wisip the same hardware?? so could I use firmware from both companies regardless of what

Dear all, I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 (comBIOS 1.33). This combination appears to not work out of the box... I see much advice floating around from a few years ago, hinting that earlier versions of PXELINUX might have worked. However before resorting to archaeology I'd be interested in feedback from others who might have got through this. I

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

I'm working with a Soekris net45xx SBC and I'm experiencing problems using any syslinux code (syslinux, pxelinux, extlinux) above version 2.20. I'm interfacing with the Soekris via the serial console port, which is the primary bios console. I've tried different configurations with setting serial in the config file, but no change (though I dont even thing it's getting to reading

Hello, Recently I have discovered a problem with serial console output when net-booting a Soekris net5501 board via pxe. When using pxelinux.0 from syslinux 4.04 package I get only 15 characters from the output, then the carriage returns back to the same line over and over again, making it impossible to read the output. What is more the booting process (trying configuration files with

Hello, Freebsd-stable. I installed 7.1-STABLE on my new Soekris net5501. Kernel config is in attach. This unit lock up in strange way every day. It is pingable, but no access to host on any network protocol (sshd, named, etc are not answering), and serial console (only one this unit has) DOESN'T ANSWER too! Only way to un-freeze it is cold reboot. I've thought, it is

I thought I saw a Soekris embedded in the Digium booth photos, can you run Asterisk on one of these? How? I'd be interested in it for a back pbx, given the reliability. In fact, might want to move my home pbx to this also. Chris Mason

Has anyone on the list used a Soekris engineering PC as a TDM - Ethernet bridge? For example something like a net4801 with a TE110p in it and then using TDMoE to get it into a bigger server where the call processing proper will occur. Anyone know if it might handle a quadspan card ok? (no transcoding, just pure PRI to TDMoE bridging). Craig

Hi, Wich mini Linux distribution do you recommend? My idea is to use Shorewall in a Soekris mother, with some mini Linux installed. Thanks and Best regards, Andrés

Hi all, I have a Soekris net4801-50 board with OpenBSD 3.9 where I've configured a dhcp server and tested it with a regular PC connected directly via a crossover cable with success. The problem comes when I try to connect my IAXy device instead of the PC. I can see with 'tcpdump -nettti sis1' that the IAXy isn't sending any packets to the dhcp server. I thought my IAXy was bad

Bob, Have you looked at any of the products by Zyxel? With QOS, VPN & wireless support they have: For ADSL: Prestige 652HW Firewall/Router: Zywall 10W & 30W I'll be honest, I havn't used any of these yet. We were looking for similar products to suuport our VOIP installs. We just ordered some demo units from Zyxel, we shoul have them later this week. I'll let you know

I see that ABPTech are now offering this SIP Wifi phone. Does anyone have an experience with it? I've considered the Pulver/Zyxel wifi phone but would really rather have something that can handle WEP or WPA. I run an 802.11g wlan with 256 bit WPA encryption. This Hitachi phone looks very much like a cell phone, which could be ideal. Michael -- Michael Graves

Hello Everyone, I am having trouble with booting a soekris 4826 board.after setting up my tftp,dhcp and web servers ,I log into the board using minicom and type boot f0,which doesn't quite work out. > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082)

Hi, We're installing an * box next week (pbxtra from fonality) and I'm trying to come up with a solution for remote users that want a phone in their home. I need VPN and QoS capability, wireless support would be a nice to have. Ethernet handoff is fine, i don't need integrated dsl or cable modem... I've been googling and cruising the list and can find bits and pieces

Hi! Then I phone other phones with my Zyxel 2000W (WI-FI) it just hang up when I answer the phone I am ringing. It works fine if I call the 2000W from other phones. I have tried many sip settings. I use this now: [205] type=friend username=205 secret=passwd205 callerid="Zyxel" <205> host=dynamic context=local nat=yes canreinvite=no disallow=all allow=g729