similar to: SNOM 360 and parking

Sorry if this is an obvious question, but I haven't seen an obvious answer on the wiki that I remember. Has anyone managed to make the record button on the snom 360 fire off the Monitor() application? I don't see a bounty, and googling for "snom 360 record button asterisk" returns tons of product specification pages. (Joy!) I don't see a bounty for it, and the only

Hello, I have a customer who said that their Snom 360 is joining calls by accident. The situation is that they had one call on the line and another call came in. She pressed the hold button on the phone and the two calls were joined together. I do have "Call join on Xfer" set to yes, but I thought that would only come into play when doing a transfer, not putting someone on hold. The

Good day all I have asterisk on a box with one network card I have a 2 companies setup on the system. To keep all apart I binded a different ip to the interface,i,o,w eth0 192.168.0.254 and eth0:1 192.168.1.254 And in sip.conf I took the bind setting out So each company's phones are on a different ip range,and all worked well So we decide to pull the snom190 out and exchange it with a snom360

I would like to hire someone to help us tweak our asterisk system for Snom phones. We would like to enable things like: One touch recording One touch park orbits Presence Please contact off-list if you will be able to help. Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone know how I can push a firmware update to a Snom 190 without using DHCP? In the web interface, I specify a path to the Snom firmware, and it works, except I have to physically press OK to get the update to download. I need to do it remotely...

I'm trying to get call parking working with the lighted buttons on the SNOM 200. I have set the 5 buttons to "Park Orbit", for extensions 700-704. Pressing the first button (x700) does park the call. However, the remaining buttons (x701-704) don't allow me to pick up parked calls, or show parking status via the LEDs. I can only pick up parked calling by manually dialing the

I am just playing with a SNOM 190. Overall, I'm very impressed with the quality of the unit and the feature set. I am running the latest firmware (snom190-SIP 3.57u) and the asterisk CVS from last night (1/3/05). The only problem that I've encountered so far is with Call Forwarding, which doesn't work at all. The Snom phone is sending a "486 - Busy Here" back to *, which

Snom 200 has be set up with extended key pad. The product literature also mention multiple sip registration. How many registration can it handle? It does not seem to appear in the user manual. David Kwok

I have the dtmfmode in sip.conf set to use rfc 2833 however, when my users have to enter pin numbers to join let say someone's conference bridge the pin is received twice. Any ideas on how to solve this? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050120/56ff46fa/attachment.htm

I'm rolling out an installation with snom 360s in the near future. Simple SOHO configuration, 3 FXOs hanging off a TDM400B, 4 snom 360s, a snom 200, some variant of IAX softphone, and an IAXy or Sipura 2002. I have the 360's set up to subscribe and notify for the line use lights, which works like a charm for interoffice calling (between the 360's, anyway. The IAXy, 200 and,

Has anyone used the programmable buttons on the SNOM 200 with Asterisk call parking? Do they work "nicely" together - i.e., do the LEDs show which parking spots are in use, and does the press-to-park button function work? - Mike

Hello Although not stictly a asterisk issue, any help would be apreciated. Firstly a few notes on the snom 360, which I have had on a test bed for the last week. Its a great phone, with a good user interface, both physically and its web based one. At its lastest firmware it does have a few quirks, with regards to the way it handles usernames and passwords on the physical interface. These have

Hi List, I have a client who is using park heavily, but once we hit the cal button (in this a hotkey tied to park orbit on the Snom's), we have a 3 second delay before we here the digit the call is parked on. Is their anyway around this at all? Does anyone know if we have these same delays if using the DTMF digits? Any suggestions would be great! Thanks! -------------- next part

Hi, I am using a number of snom190 phones, and an asterisk "gateway" server, and recently started experimenting with call transfers. The snom phones provide support for attended and un-attended call transfer, so I would rather use that than call-parking. I have found that un-attended transfer works fine, and that attended transfer works fine if the originating phone call is NON-SIP

I would like to use one of my Snom 200's 5 programmable keys to park calls. I am using image SIP 2.04g. I have tried a variety of combinations and have come to the conclusion that: 1) On the Key Mappings administration page, I must select the "Transfer" under the "Break Keys" option box to be able to successfully transfer calls using the "Transfer" button. 2)

Hi, I've looked through the archives and seen references to placing calls on hold on a snom 200 (any version of the firmware but we have the latest: 2.05e.) Basically, we can't place calls on hold on the snom 200! The manual talks about the Flash button (which is really the "R" button, as far as I can tell.) Pressing the R button will immediately disconnect the incoming call.

Hello, Is there any way to park a call on a specific park number? If this is not possible, is there any way to create multiple park orbits? Also, is there any way to invoke call parking of an active call coming through a Zap channel from the manager interface? MATT---

Does anybody know if there is an app that will cause similar to occur on users PC? I have a scenario where users will have snom phones on their desks. Ideally when their phone receives a call I need to popup a web browser with a specific url. Any ideas appreciated. Neil on 5/7/05 10:52 PM, Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> wrote:

Hi all, Is there anyway you get Asterisk to let you park a call a second time via pressing the # key + 700 (or whatever is in features.conf) ? If you get a call out of the parking lot & hit # again it just sends the DTMF tone down the line and nothing happens.. A few posts have hinted that you cannot blind transfer a parked call, but surely there must be some way around this as I can

I've got a situation where I need to use a transfer to the parking lot as hold, but am not going to use BLF indicators on the phone to pick up the parked calls so I need to hear the 3-digit extension after the transfer. I'm using Snom 300 phones and have tried setting a programmable button to Key Event F_TRANSFER 700, which successfully does the transfer but cuts off audio so you