similar to: Cisco SIP Frimware for 7940/7960 v7.5

Hello list, does anyone know how to change the "interdigit timeout" when using Cisco IP Phone 7940/7960 with SIP-Firmware and Asterisk? it's default value is 15 sec. but i have nothing found to set this in tftp-config file etc. Thanks in advance, Roland

Hello! Is there a way to use AVM Fritz!PCI as a ZAP interface and have it configured for ZAP channels? Thanx in advance! Roland Zagler mailto:r.zagler@fog.at @fog smart partners

Hello! Is it possible to run Asterisk as a SMS Service Center and does it work over a directly connected ISDN (CAPI) interface card? Did anyone already use Asterisk for that? Roland Zagler mailto:r.zagler@fog.at @fog smart partners

Hello! I want to use "asterisk -rx "show version"" from a php script called in the browser using the local apache, which runs as user "apache". Asterisk is running as root. I added the following line to /etc/sudoers using visudo: apache ALL = NOPASSWD: /usr/sbin/asterisk When i am on the command line of my linux box it looks like this:

Please can someone send me the .tar.gz file of spandsp, the site is offline and i didn't find it anywhere! Thanxxxx! Roland Zagler mailto:r.zagler@fog.at @fog smart partners

You can send both paties to a meetme conference with Manager Redirect. Or if you are feeling more adventurous you could load the Manager Bridge patch that I posted to the bugtracker two months ago. It allows bridging of any two existing channels together through a manager action: http://bugs.digium.com/view.php?id=4297 MATT--- -----Original Message----- From: Roland Zagler

Hi to all out there using HP DL380 G4 servers, i found a way to get the Digium TE410P with older firmware running on a HP-Compaq DL380 G4 Server! Here's the step-by-step description: 1. download the latest BIOS (in my case it was 4.04 from date: 06/02/2005) for the HP-Compaq DL380 G4 using the "Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL480 G4 (P51) Servers" Link:

Hello, When i have a "Hangup" in my dialplan (extensions.conf) the RFC says to terminate the session is to send a BYE request to UA. After tracing the traffic on port 5060 UDP i recognized that my asterisk is NOT sending a BYE request to it's peer, so the peer doen't know to end the session and continues to send RTP packages to me. Does anyone know how to fix this? Here's

Thank you, Robert! The announcementfile plays well, but at Dial-option "m" i have to specify a MoH class, that is something i cannot use (as i wrote in my post). Background command waits for a user input, but the caller should be connected to SIP Phone 100 after it has answered and the announcement has been played. Before connecting to SIP Phone 100 the caller should hear a

We've been experiencing an odd issue lately. I'm not sure when it started because it's not happening on most calls--it seems confined to a couple of our queues. It's consistent though. Here's the CLI output: -- Got SIP response 400 "Bad Request" back from 192.168.249.94 -- SIP/502-9a58 is circuit-busy I've tried a few different Asterisk versions

try this one exten => 999,1,Answer() exten => 999,2,playback(~.mp3) exten => 999,3,dial (sip/100) exten => 999,4,playbackground(~.mp3) exten => 999,h,Hangup() not sure abt playbackground should be before the dial command or after ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Roland Zagler Sent: Sat 7/2/2005 8:23 PM To:

For anyone who is interested, I have a working tftpd (modified wvtftpd) capable of serving configuration, dialplans, and ringtones to Cisco 7960/7940 and ATA-186 devices that are located behind NAT firewalls. As TFTP is not a very firewall/NAT friendly protocol, I had to break some rules to get it to work with these cisco devices. It might cause problems for other TFTP clients, but it works with

Thanks for the suggestion, C F, but the problem is there is a rather big database application behind with many users, so a static configuration is not suitable for my needs. i am working mostly with realtime and agi. regards, roland -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of C F Sent: Sunday, July 03,

Typo in your OS79XX.TXT P00 ? instead of P0S !? -----Original Message----- From: Michael L?jtnant [mailto:ml@zyxel.dk] Sent: 17 August 2004 13:31 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Cisco 7.2 firmware for SIP 7940/7960 released Hi Shaun, Saw you post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you

I am guessing you are running without reinvite's, I'm running with reinvite's with latest CVS release and 79x0 phones without any issues with conferencing... > -----Original Message----- > From: Adam Rothschild [mailto:asr@latency.net] > Sent: 08 October 2003 15:49 > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Cisco 7940/7960 phone and >

Hello, I'm considering using Asterisk with some type of Cisco phone, and currently considering either the 7940 or 7960 because of its more-complete functionality (compared to the 7905). I'm currently wondering: Do all the expected functions (transfer, conference, voice mail, message waiting indicator, etc.) work normally with Asterisk over SIP? What caveats are known about using

> -----Original Message----- > From: Travis Johnson [mailto:tlj@ida.net] > Sent: Monday, September 08, 2003 1:05 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Cisco 7940/7960 ethernet ports > [...] > We are having a problem with Cisco 7940 and 7960 phones when > the PC is plugged into the 2nd ethernet port on the phone. It > will drop the

I have noticed a problem with the Cisco 7940/7960 phones where if you put your voice-mail box on hold using soft keys and come back you can no longer navigate. I am curious if anyone else can duplicate this problem. Happens reliably for me with the 7940 phones. I use rfc2833 for DTMF. I would think it was a Cisco bug, but for the fact that this did not happen with older version of

Those of us that use Cisco 7940/7960 sip phones know that we've been impacted by two very different changes that have occurred over the last couple of months. First, when cisco created sip v6.x code, they implemented a new DSP (as well as other software changes) that effectively drops any incoming rtp packet that does not have even timestamps within the rtp packets. The dropped packets

Has anyone had any major issues with the Cisco 7940 and or 7960 phones? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030818/2c156d1f/attachment.htm