similar to: Asterisk realtime failover problems

If your phones are setup to connect to the asterisk box by name, then a smart DNS server can just point phones to the backup box after failure. However, since asterisk running on the backup box doesn't know about the phones, this is only half the solution ________________________________ From: Mohamed A. Gombolaty [mailto:mgombolaty@noorgroup.net] Sent: Thursday, June 30, 2005 8:30 AM To:

Dear All, I have downloaded the xlite version 2.0 for windows and I made the following conf in the xlite itself as the document suggested in order to make it work with Asterisk but still it doesn't work as a matter of fact when I tried to make a tcp dump I can see no packets going between the windows client and the Asterisk server at all, here is the my conf on the xlite itself: in the

Hi, It seems that the "switch" parameter has a priority in the dialplan that is higher than the wildcard extensions.. This I am finding to be a problem.. My setup.. UA1--[AST1]--{IAX}--[AST2]--UA2 | | PSTN1 PSTN2 I use switch on AST1 to connect to AST2... As you can see I have PSTN connections on both and also the IAX connection is not permanent.. I

Hi all. Ive recently setup two Asterisk boxes (running Asterisk@Home to be specific), and Im trying to get a trunk going between them. So far I have tried a combination of IAX and SIP configuring them through AMP and writing the config files manually, but I cant seem to get calls going between the two. I have named each box asterisk1 and asterisk2. Does anyone have some working SIP and/or IAX

Questions: Does anyone have a really STABLE asterisk system running about one year without need to restart the service or the SERVER ? Does anyone have a production Call Centre saled that don't lockup and is stable for 6 months ? I'm asking this questions because we have choose Asterisk for our call centre solution but, since the bugtracker only grows and people still want to stuck more

Hi All, I've been observing a very odd behaviour of Asterisk, when relating to SIP connections. Here's the scenario: Ast1 is an Asterisk box originating calls via a predictive dialer Ast2 is an Asterisk box connected to 3E1 circuits Ast1 originates calls to Ast2 via SIP, in order to utilize the PSTN lines. (There is a reason I'm using SIP here, so please don't say:

Hi, I'm looking for a reliable provider to use mainly for outgoing calls in the UK, incoming isn't so much of a worry as I think I'm going to accept them over ISDN. Cheers! Steve -- Steve Foy steve@narnian.org

Dear All, I am trying to make the phones always talk to each other (peer to peer) using SER as a sip proxy, and incase the call is not answered we will use the voicemail of asterisk and other feautures, I have done that already, but in order to do so I found that I have to make the users dial different exten numbers, here is an example: user with exten 666 wants to call 999 . 666 dials 1999 and

I love TrixBox, with the custom config files you can tweak pretty much with TrixBox too, I have at least done some. Plan to do a plain Asterisk install later, but for now I learn a lot about the config files just with TrixBox. Some things might be a bit harder with TrixBox due to some of the premade dial plans, but can get it to work :-) _____ Fra: asterisk-users-bounces@lists.digium.com

Maybe someone has already suggested this, but if your functions accepted strings you could use sub or gsub to replace the -> with a symbol that parsed at the same precedence as <-, say <<-. Then parse it and deal with it. When it is time to display the parsed and perhaps manipulated formulae to the user, deparse it and do the reverse replacement. > encode <-

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, As I've been unable to get app_transfer to work, could someone explain how it is supposed to work? Currently I have two Asterisk boxes. A call comes in via zaptel to ast1. ast1 dials ast2 using iax2 and gets instructed to transfer the call to a different extension. iax2 debug shows that a transfer cmd is sent to ast1, but nothing happens

Dear All, I was trying to enable call forwarding, following the steps of the link on voip.org regarding this issue it doesn't work and the phone I am trying to implement on is still ringing. below is my conf in extensions.conf and the CLI output during the process. My configuration is : exten => _*5X.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:2}) exten => _*5X.,2,Hangup exten =>

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, As I understand it, Asterisk currently uses the timestamps in incoming RTP packets to build outgoing voice frames. Is this true? Would it be possible for me to use i.e. zaprtc as a timing source for the outgoing stream? I.e. in a setup like below I'd like to use zaprtc timing on Ast1 because I don't trust the timestamps coming from

Hi Pan & Dhaval, In the past 8 weeks, we have delivered a load-balanced asterisks (1.4) based call center with our flexqueue application for icson.com. It has the below features, 1. 2 x asterisk 1.4 boxes, 1 x mysql db box and 1 x flexqueue box(the two are failover configured with heartbeat and custom script, and mysql master-slave replication between two svr), 2 x kamailio boxes(failover

Here's a good one for the group, I have 2 Ast servers behind a NAT (Sonicwall :-( ) connecting to the same server outside the NAT. Each of the 2 boxes behind register to the outside server. What I am wondering is, would there be a problem if both servers behind the NAT were listening on port 4569, I realized that the NAT'd port gets changed however I wasn't sure if this would be an

The registry's are stored in DB. Just export your database with 'database show' Schedule it with cron to run every 5 minutes or so. You can do that with -rx command line switch for asterisk. Send the file across to other node and pipe it through awk/perl/cut or whatever you like and import it when you bring the other node up. You will have to stop and start asterisk I think. I

Dear All, I have installed Asterisk everything is OK until I tried to configure meeting room, configuration was simple enough when I try I get a message that it's not a valid meeting room, Now I don't have a Zaptel device on my machine, so I found that you will have to use ztdummy to make a dummy zaptel device on your machine and this is because of timing issues. My question is ztdummy

Dear All, I am totally new in this arena and I am still waiting for my installation process on freebsd to finish, but I wanted to make sure of the following: - Call routing between IP telephones can be done regardless of who made the phones? - Asterisk does support SIP V2? - it does act as SIP Proxy and Register? -- Thx MAG -------------- next part -------------- An HTML attachment was

[image: Post]<http://accessanywebsite.com/search.php?u=Oi8vd3d3LmVmbG8ubmV0L1ZJQ0lESUFMZm9ydW0vdmlld3RvcGljLnBocD9wPTI4NjU%3D&b=2#28652>Posted: Thu Apr 09, 2009 8:34 pm Post subject: DTMF and IVR ... Sorry but URGENT[image: Reply with quote]<http://accessanywebsite.com/search.php?u=Oi8vd3d3LmVmbG8ubmV0L1ZJQ0lESUFMZm9ydW0vcG9zdGluZy5waHA%2FbW9kZT1xdW90ZSZwPTI4NjUy&b=2>

Dear All, I have an asterisk server version 1.2.12.1 along with trixbox and I am having this nasty problem, I have a TE200P and have an E1 pri attached to it and zttool says it's OK, I have configured the whole 31 channels into one group as follow: Zapata-auto.conf: callerid=asreceived signalling=pri_cpe switchtype=euroisdn context=from-zaptel group=0 channel=>1-15,17-31