similar to: Zaptel won't compile under Fedora Core 4

I am having a problem compiling zaptel on my Arch Linux (linux 2.6.10) system: CC [M] /home/sbn/src/zaptel-1.0.3/wcfxs.o /home/sbn/src/zaptel-1.0.3/wcfxs.c: In function `wcfxs_interrupt': /home/sbn/src/zaptel-1.0.3/wcfxs.c:473: sorry, unimplemented: inlining failed in call to 'wcfxs_proslic_check_hook': function body not available /home/sbn/src/zaptel-1.0.3/wcfxs.c:810: sorry,

I know that this subject has been treated in the past! As a matter of fact reading some old messages about compiling zaptel I made a couple of tests after the first compiling failure to understand why I can't compile on a specific machine, but I do not know how to handle the results. The machine has SUSE 9.3, and an updated kernel (2.6.11.4-21.7-default; as shown below). YAST (the graphical

I wouldn't normally post this to the asterisk mailing list but I'm really stuck... I've been trying to get meetme working on and off for a few months now but I always hit a brick wall when trying to compile. I keep seeing this... make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o

Hi Guys, Gals. Ok, so I have latest CVS sources on a debian box, 2.6.10-1-386 kernel kernel headers isntalled in the right plauce and all that stuff .. but whatever I try .. same results, I only need to get ztdummy working for a conference .. but I always end up stuffed :( heres the compile: robin@debian:~/zaptel$ make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE

I try to compile zaptel, without much success. I followed the guidelines in http://www.voip-info.org/wiki-Asterisk+Zaptel+Installation making dependencie results in: asterisk:/usr/src/linux # make dep *** Warning: make dep is unnecessary now. and make tells me make[1]: *** No rule to make target `modules'. Stop. asterisk:/usr/src/zaptel # make clean rm -f torisatool makefw tor2fw.h rm -f

Hi, I have the SuSe9.2 installed in a box with a QuadBri. I have followed all the instructions i have found and this is my best result... only one error compiling zaptel :( .. y have the kernel sources an already made the links to its drwxr-xr-x 8 root root 328 Jun 16 20:20 . drwxr-xr-x 12 root root 320 Jun 16 14:05 .. drwxr-xr-x 3 root root 136 Jun 16 20:17 asterisk drwxr-xr-x 22 root

Anyone seen this and know how to fix it? (note the Assembler messages at the end). Thanks in advance: server# make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits > tones.h cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64

Dear list, I am back with my problem compiling zaptel 1.0.9 . I am running SUSE 9.3, with kernel linux-2.6.11.4-21.7 I have the kernel sources on disk. YAST tells me they match the compiled kernel. > # ls -l /usr/src >total 1 >drwxr-xr-x 7 root root 280 2005-07-16 13:24 . >drwxr-xr-x 12 root root 344 2005-07-16 11:27 .. >drwxr-xr-x 25 root root 736 2005-07-16 12:12

Group Having trouble installing zaptel. Below is my server specs Intel Motherboard D101GGC TE405P CentOS-4.2-i386 Here is the output trying to do a 'make' =============================================== make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f

Hi, I'm still strugling with getting an easy to use conference system implemented. I did have app_conference running, but today I upgraded asterisk to 1.0.9 and it stopped working. I've tried following the instructions for compiling app_conference on 1.0.7 but it didn't work. So I went back to ztdummy (I've not had any luck getting this to compile on FC2). Anyhoo, I've

Ok so I read the Linux 2.6 related README and finally compiled propperly, I thought but at the end I notice that lscpi does report the cards, but I cant modprobe wcfxo nor zaptel and I do have wcfxo.ko in the /lib/modules/2.6.8/extra/ directory, so what gives? This is a Debian Sarge, thanks! # # make clean starts here # make[1]: Entering directory `/usr/src/zaptel-1.4.0/menuselect' rm

Chuck, Thank You I'm also going to try CentOS 3 The problem is I have SATA HDD and running in to trouble getting Linux installed. Will update after I test Ver 3 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chuck Bunn Sent: Monday, March 13, 2006 12:45 PM To: Asterisk Users Mailing List -

Hi, I'm running SuSE 9.3 fully updated using YOU and I *have* re-booted the box (in a hope to sort out the uname -r issue mentioned below). I'm using the Asterisk Doc Proj vol 1 to guide me through the initial setup. I have no special HW and intend to use asterisk on an internal network just to get some experience. I have downloaded what I think I need and placed it in /usr/src (see

Hi, Just downloaded the latest cvs from zaptel on my sparking new Athlon64 Centos4.2 system, but hitting a stumbling block... (sorry for the long post) #make cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64

Hi All, Newby with problem when attempting to make Zaptel on Red Hat linux 9.0. I have seached Google, VoIP forums etc and cannot resolve issue. (Red Hat 9.0) Linux version 2.4.20-31.9 (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Tue Apr 13 18:04:23 EDT 2004 All Packages installed per: http://www.voip-info.org/wiki-Asterisk+redhat9+packages Per

Hi all! Sorry, the error-log in my previous mail was disturbed. Can anybody please give me some advice, what is wrong at my first try to compile Asterisk. I have successfully downloaded the sources from CVS, but now the next step at zaptel " clean; make install" fails. Please have a look at the error-log below. There must be a fundamental mis-configuration I suppose, but I am

Hi all, I'm unable to complete the installation of zaptel. I did a checkout today from cvs. When I do make clean; make install. It gives me an error at this portion of the installation: /include/linux/modversions.h -DSTANDALONE_ZAPATA -c wct4xxp.c cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE

Hi can you help ? I have been trying to compile the zaptel modules all day for installation with out success, see messages below.... Setup as follows X100P card Intel Celeron (686) 1.7ghz processor Redhat Fedora Core 2 (Linux-2.6.5-1.358) When I do the make I get the following errors Any comments would be great ====> make make -C /usr/src/linux-2.6.5-1.358 SUBDIRS=/asterisk/zaptel-0.9.1

Have anybody experience with the following error on a linux system. The system is for the rest running perfect without problems. The system was full installed with Suse 9.1 and updated. Following uname is my kernel 2.6.5-7.104-default Greatings Han Suse 9.1 professional AMD Atlhon XP 2200 Asus A7V600-X bios 1005 1Gb memory 400Mhz Geforce MX 4000 64MB 40 GB Harddisk

Hi! I currently have the X100P and TDM400P Asterisk cards. For obtaining Asterisk PBX: I have no direct connection to internet, so I use ftp and download the neweast packages: zaptel-0.7.0, libpri-0.4.0, asterisk-0.5.0. The environment I compiled the tool: PC (HP): Intel PIII 500 MHz OS: Red Hat Linux 8.0 (Upgrade from Red Hat Linux 7.1). When I compile the first package (zaptel-0.7.0), I