similar to: Strange softphone issue - audio open before answer

Hi folks an issue I don't understand. I'm running * stable 1.0.3 on public internet, with following iax.conf / sip.conf entries: iax.conf [100] type=friend username=Foo context=default auth=md5,plaintext,rsa secret=secret host=dynamic callerid="Foo" <100> qualify=no sip.conf [10] type=friend username=Bar context=default callerid=Bar <10>

Hello, I've got very annoying behaviour from our asterisk PBX. We have 12 channels T1 e&m wink start for TDM and using iax softphones internally (iaxcomm, but tried firefly-thirdparty and discarded for bad sound quality). Slackware 9.1 w/ kernel 2.4.26+ digium TE110P card. In some cases when call is placed from softphone to TDM, system does not detect call answered on Zap channel and

Quick question from a newbie, I have asterisk configured to dial IAX extensions (which works). When dialing from one IAX extension (using Firefly) to another IAX extension (also using Firefly), the Firefly client rings on the receiving end and gives the option of accepting or denying the call. However, when I dial in to Asterix using a VoicePulse number and dial the same extension Firefly

Hello, I am having horrible echo problems when using the FireFly client on both the caller and callee sides of the call. When I use another IAX soft client like IAXcomm or IAXPhone I do not have the same echo problems. Has anyone else experienced this and do you know what might be the problem? Thanks, dj -------------- next part -------------- An HTML attachment was scrubbed... URL:

After many months of development, I'm pleased to announced Firefly - an IAX soft phone and network. The firefly softphone - free, runs under windows, allows connection to multiple networks, skinable interface, connection to firefly network, IAX2 protocol, (SIP in next release), codecs supported - iLBC, G.711 ulaw/alaw, GSM. - contact lists, selectable ringtones. download from here -

Hello All, I have been looking for a commercial version of an IAX2 Softphone for Windows but the ones I have came across (i.e. Iaxcomm, Iaxphone, Diax) do not seem to have an updated version since April 2004 in some cases. We looked at Firefly but we sent emails to Virbiage/Freshtel with questions and could never get a response from them. Has anyone got any recommendations for commercial

As a test, I was trying to use Iaxcomm and Iaxphone to connect to Asterisk and dial out to my other line. Using either of these soft phones, I can connect to Asterisk and listed to audio just fine. I can even connect across the net to another asterisk server and hear audio just fine, however, when I dial out to my second land line the audio that is transmitted is horribly broken up. It is as if

I've tried Idefisk and Cubix Softphones, and they both work fine, except for two issues: 1. Idefisk seems to have a longer delay between the time I can hit tones, and 2. Cubix, while can send DTMF faster, never actually connects to an Asterisk-dialed call -- I can't hear the party who answers. #2 has been asked but unanswered here:

Hi List; I need to configure a softphone to be client and use it with Asterisk, which is the recommended one? Is it iax2? Regards Bilal ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

Hello! I have a number of IAX clients behind a NAT (on the same LAN) and asterisk server on the Internet. And that clients doesn't speak directly to each other, traffic goes through the asterisk server. What should I configure to make IAX clients on the same LAN to speak directly, please? notraster=no is set in iax.conf The asterisk server is on real IP behind a NAT (at DMZ with full 1-to-1

Hi All Has anyone used Cubix / Firefly successfully with Asterisk? When someone calls a Cubix softphone, Cubix never seems to answer the call correctly. The other person just hears ringing even though it has been answered. I am using IAX as the SIP support doesn't seem to 100% either. Idefisk works 100% on the same setup. Kind Regards Garth

I am using IAX soft clients (firefly, IAXComm, IAXPhone) from a Win2K machine on a NATed private LAN to connect to my IAXTel account. All of my calls to outside numbers(1-800, 1-877, etc) seem to be disconnected after 9 seconds. Has this limit been placed on IAXTel? My call to the echo test number at 1-700-999-9613 seemed to run for as long as I wanted. --

Hi everybody i have a problem trying to connect an incomming phone call from pstn to my (soft phone) iaxcomm, the phone rings but when i try to answer the call, asterisk sends a message like this. Jun 1 19:33:17 NOTICE[5013528]: channel.c:1223 ast_read: Dropping incompatible voice frame on IAX2[192.168.222.99:4569]/16 of format GSM since our native format has changed to ALAW i'm working

Hi, IF i use a sip softphone or a iax softphone with asterisk, i get a lag of about 1 second. The two phones were on 2 different pc's near me. When I speak on one, i hear it on the other after about 1 second. I tried using iaxComm, Xten Xlite, etc. Same. FYI: The codec used was GSM. Using the fxo and fxs interfaces on the digium cards with POTS have no such issues. Any clue where the

Hmm. By the way, please don't post bugs to asterisk-dev as I've been told :> That list if for on-going development. That sounds like a bug I encountered in 1.0.5. There is a division by zero bug in chan_iax2.c introduced somewhere after 1.0.4 I believe and currently fixed in HEAD. (They've given me enough shit for posting the bug while it was fixed in HEAD already. No need to

Hi Everyone, I've got a weird problem with both Firefly & iaxLite (both IAX softphones). They don't seem to stop ringing when an incoming call is make to them. If the call is answered the conversation starts both ways but the ringing sound still keeps going and the softphones keep displaying that a call is coming in (but they do not display that the call is answered). I read

After having been toying around with asterisk and various VoIP stuff for a couple of weeks now, I want to recommend a preferred protocol and softphone to friends and family for calling me up. As SIP and H323 are such a mess to set up in NATed environments, the only reasonable protocol option right now seems to be IAX. After looking at http://www.voip-info.org/wiki-Asterisk+IAX+clients and trying

Hi All; I tried Firefly softphone with IAX and it gave very poor quality. Any one advise a good strong softphone that can work with IAX fine? Regards Bilal ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Here's a flipside of this subject: what is the absolute cheapest Linux device that can be connected to a PC's USB port? That has just enough power for a minimal Asterisk server running on it. The Asterisk just maintains a CDR database on its Flash memory, which it periodically submits over the PC's network connection with an HTTP hit on a remote full-service Asterisk server? No call

Is there a softphone for windows that supports IAX? I can't seem to find anything out there...maybe im looking in the wrong places... Jeromy Grimmett VoipEmpire.com jeromy@voipempire.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050523/e668136a/attachment.htm