similar to: Newbie Question: Type of card

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards

Hi there, I know this question is kind of stupid. But, I don't know anywhere else to ask. I've received some answers when I asked about the need of having a zaptel interface to make the meetme application work, that said that it was better to have a real hardware then the zaptelrtc software modules. So, my question is, would any of the following cards work with the meetme

hello, i installed an asterisk as a pri gateway. Everything is okay. /etc/init.d/zaptel starts successfull with wct4xxp module. /etc/init.d/asterisk starts also successfully. I tested my pri cable and it works. But still my span isn't up. I don't see any error. Do you have any idea? What else i should check? Thanks. My card is 4 span Wildcard TE410P

Hi: I had an fxo card from Digitnetworks and it was working fine on my Asterisk box. I then replaced it with TDM04B. I changed the zaptel and zapata to include the four channels. When I run ztcfg, I get configuration errors: Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04:

We are trying to determine how to build out an IVR system we are working on. The system needs to be able to handle probably at most 5-10 concurrent calls at peak times. Other times we are just looking for a reliable service. For incoming calls we've been using BroadVoice VOIP and before that VoicePulse VOIP. VoicePulse's IAX service started dropping DTMF inputs that we were processing

Hi, I have a running asterisk 1.2.1 (bristuffed) with a TDM400 Board. Connected to 1 port is am ordanary Fax Machine. Everything 'seems' to work, however receiving faxes is very unreliable. Sometimes I receive a normal page, without problems. Sometimes half of a page and the rest is scrambled, but most often, I receive nothing and the other site reports a Fax error... The Fax machine

Hi all! I have a model (Show) than can have an unknown number of dates. And a date can have an unknown number of shows. Making a Date model seems icky, espicially since I would have to probably write a lot of glue code to get the many-many to work easily. I was thinking maybe storing a Marshaled array of Time objects in a text field, but that isn''t very clean either... Any Ideas? --

Hi All, Can someone give me a definite answer as to wether or not you can reliably run multiple TDM400P's in the same machine? I need 4 x FXO and 4 x FXS to connect to both the PSTN and existing key system, but I have seen several threads suggesting that this is not a supported configuration Thanks, Marc. -------------- next part -------------- An HTML attachment was scrubbed...

I am looking to replace all of the old "Bell" (POTS) phones in my home and office with IP phones. As you can imagine I don't have a huge budget to work with but I want phones that will provide acceptable voice quality and durability. There are basically three categories as I see it 1. satellite phones (low cost, low function) 2. primary domestic phone (good quality, POE capable,

I am a newbee to asterisk. I recently installed asterisk@home. Everything went well and my set up is running fine with soft phones, such as kphone and XtenLite. Now, i want to be able to connect my analogue phones to my asterisk pbx box and use it as if i make a regular Phone call (I do have my PSTN gateway account with broadvoice.com and already configured to route through it). I do NOT have a

Dear All. I'm very new to CT, but attracted by asterisk. I plan to start learn to build IVR, based on asterisk. Do I need FXO/FXS card to start building simple IVR box ? Can I use OEM X100P - FXO PCI Card ( http://www.digitnetworks.com/store/product_info.php?products_id=28 ) to start build an IVR box ? What is the cheapest FXO PCI card that can use with asterisk to build my first IVR box ?

Memory leaks found by the tool--valgrind along with static reviewing. Based on Daivd''s branch ''integration-20130903''. Gui Hecheng (5): btrfs-progs:free local variable buf upon unsuccessful returns btrfs-progs:local variable memory freed btrfs-progs: missing tree-freeing statements added btrfs-progs:free the local list pending_list in btrfs_scan_one_dir

Hi, I've purchased two x100p clones, and when I try accessing a line from asterisk with something like this: exten => _1NXXNXXXXXX,1,Dial(Zap/2/{$EXTEN}) (is that only supposed to put you on channel 2 or actually dial the # for you?) but I first hear noise, then a dial tone, but as soon as I start dialing numbers I get feedback and noise, and the call doesn't go through. Any

I'm considering building a network gateway using a Via EpiaCN10000EG motherboard like seen here: http://www.logicsupply.com/product_info.php/cPath/79/products_id/444 I've heard that this is a pretty recent mobo and drivers for it are in Ubuntu but that a 2.6.9.x CentOS kernel might have troubles with it. Anyone have any opinions on this mobo? Thanks jed

Hello Folks, I'm trying to decide here between a few cards for connecting an Asterisk box to a single E1 channel (either PRI or R2 signaling): - Digium E100P: has been replaced by the TE110P below, but can still be had at places like digitnetworks.com for $475, and I guess there's always a place for good-olde-obsolete cards in the world as long as they work :-) - Digium TE110P:

Hello, I am working for a charity in the UK and I am projecting a new phone system. We would like to connect our two-wire telephones (40 or so) to an ADIT 600 channel bank, and connect that into an Asterisk box via the CMG card or T1 card. I have been in talks with Carrier Access about the purchase of a new channel bank and we tried to get a minor version of it first for testing with the

I've just installed a Digitnetworks X100P clone in my * server and run the install script for the voicepet-single-x100p tarball. The install appeared to run OK with modprobe wcfxo successful and the ztcfg reporting "Channel 01: FXS Kewlstart (Default) (Slaves: 01)". When I try to start * though I get a segmentation fault after loading res_features.so. I discovered that the

Hello, If asterisk.org can't provide you documentations have a look here : http://www.digium.com/index.php?menu=product_detail&category=software&product=ABE I do hope some people understand my posts. Regards Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger

Hi, I'm interested in extending OpenSSH's PKCS#11 code to support ECDSA keys, but have so far been unable to find anyone who can sell me a smartcard that supports it. They certainly exist - AFAIK it's required by the US PIV standard, but obtaining cards that support it in single digit quantities seems all but impossible. Can anybody on this list help? I'd want 2-6 cards/tokens

Hi SIP is such a pain to use when NAT is involved that I'm willing to buy an IAX hardphone for someone who works remotely over the Net and needs to get calls from our Asterisk server, itself behind a NAT. Are there good, affordable IAX phones you would recommend? Thank you.