Displaying 20 results from an estimated 300 matches similar to: "/etc/asterisk/manager.conf"
2011 Nov 11
4
libusb not recognized?
[Andrew: please subscribe to the nut-upsuser list:
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
Also, please gzip any attached logs.]
> Hello,
>
> I downloaded NUT ver 2.6.2 and tried it on my Linux development
> board. when I configure and it notified me that "USB drivers
> requested, but libusb not found."
> Then I download libusb
2004 Jan 13
2
Asterisk and Festival (* dies with no info)
Hello,
I have Asterisk running on a RH9 box; Everything seems to be working as it
should, except for Festival. Every time that Festival is called from
Asterisk, Asterisk silently shuts down. Festival doesn't give any error
indication and Asterisk just plain dies without a peep.
Festival was installed per the Wiki, using source and patched with
festival-1.4.3-diff; it works fine at the
2018 Oct 23
2
AMI not listening on secondary IP address?
Hi.
I have three servers running corosync and pacemaker, to maintain a floating
address between them. This is working fine, and I can, for example, SSH to the
floating address and get to whichever server has the address at the time.
I am trying to connect to the same server (using the same address) for AMI,
and it just isn't working, even though I can connect to the primary address of
2003 Jul 18
2
Correct syntax to call using IAX and a different UDP port
Hi,
Which is the correct syntax to call using IAX?
I have two Asterisk boxes behind a NAT and one of them use the default port
5036 for IAX, the second one use 5038.
To call an extension of the first one, the line in extensions.conf is:
exten => _9XXX,1,Dial(IAX/user:pass@195.3.32.191/${EXTEN:1})
and for the second one:
exten => _8XXX,1,Dial(IAX/user:pass@195.3.32.191:5038/${EXTEN:1})
2003 Jul 19
0
IAX can be used on a different UDP port?
Hi,
I'm back with my question, maybe someone can help me:
I want to use IAX on another UDP port (not the default 5036), because I have
2 Asterisks behind the same NAT.
Changing the default port in iax.conf file from 5036 to 5038 and then
calling using the syntax:
exten => _8XXX,1,Dial(IAX/user:pass@195.3.32.191:5038/${EXTEN:1})
I get the follwing error in the Asterisk console:
--
2014 Dec 29
2
[OFF TOPIC] monit
Hi list , I'm trying to run monit with asterisk, starting as simple
# My PBX Asterisk
check process asterisk with pidfile /var/run/asterisk/asterisk.pid
start program = "/etc/init.d/asterisk start" with timeout 60 seconds
stop program = "/etc/init.d/asterisk stop" with timeout 60 seconds
if failed host 127.0.0.1 port 5038 then restart
if 5 restarts within 5 cycles then
2005 Feb 15
1
Making nt_printer.tdb from tdbtool?
Hello All --
We are trying to consolidate our printer management from
a series of NT print servers to a series of Samba ones,
in a global network with ten offices and about 150 printers.
All printing is PostScript and goes to HP and Canon printers
over lpd through custom 'if' filters which do accounting.
To help this we're trying to automate the printer and
driver registration
2020 Nov 18
0
CEBA-2020:5038 CentOS 7 evolution-ews BugFix Update
CentOS Errata and Bugfix Advisory 2020:5038
Upstream details at : https://access.redhat.com/errata/RHBA-2020:5038
The following updated files have been uploaded and are currently
syncing to the mirrors: ( sha256sum Filename )
x86_64:
1b57cc987d64b98efbaa6f796a3df838d4f4cc4a2b892e4e19685ea37ea8188d evolution-ews-3.28.5-8.el7_9.i686.rpm
2003 Dec 31
0
ast gui client error
do you have the manager interface turned on?
You need to make sure your /etc/asterisk/manager.conf file looks something
like this:
;
; Asterisk Call Management support
;
[general]
enabled = yes
port = 5038
bindaddr = 0.0.0.0
[testuser]
secret = test
;deny=0.0.0.0/0.0.0.0
;permit=192.168.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user
write =
2007 Mar 12
1
ACM question
I can telnet to the ACM on the local machine but I can't get to it from
another machine I've been over the information about ACM at voip-info.org
and haven't been able to figure out what I'm missing. I've included my
manager.conf file and the error I'm getting from the other machine. Can
anyone point out my problem?
TIA
Manager.conf:
[general]
displaysystemname = yes
2019 Apr 04
2
Message: Authentication failed on manager interface
I'm not sure how much more simple I can make this but I just cannot
seem to get my Asterisk 13 to accept a connection on the manager
interface:
--- manager.conf ---
[general]
enabled = yes
port = 5038
bindaddr = 127.0.0.1
[myasterisk]
secret=a
permit=0.0.0.0/0.0.0.0
read = all
write = all
So, couldn't be any more wide open and simpler to connect yet:
# echo -e "Action:
2004 Jul 29
2
Zultys Zip 4x4
Is anyone successfully using one of these with Asterisk? I cannot get the
phone to register, this message keeps coming up on the Asterisk console:
Jul 29 14:11:39 NOTICE[1125350192]: chan_sip.c:7323 handle_request:
Registration from '"000BEA801CA6" <sip:000BEA801CA6@hcs.net:5060>' failed
for '204.194.36.138'
The telephone LCD says "SIP registation
2005 May 19
1
Manager Port
Hello all,
I am using flash operator panel, when i stop iptables everthing is fine, but
once iptables is started, the operator panel doesn't work anymore. Anyone
know how to set up the iptable in order for to op panel to work? I am using
tcp port 5038 for asterisk manager, and I have try open both tcp and udp
port 5038 in iptables but without success.
thanks
CCF
2001 Nov 16
2
smbmount and UNIX Permissions
Hi,
I have two Linux boxes and I want to be able to mount a share from one machine to another.
Even tho both are *nix m/c why are all files in the mounted directory marked with mode 777???
I dont want to use NFS, how can I get this to work?
thanksashwin
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ \|/ ____ \|/
Home: 732-342-7323 @~/ ,. \~@
Lab: 732-445-6721
2007 May 20
1
Caller ID matching
What's going on here? 555* seems to indicate that the number is being
passed as the callerID because NoOp says the phone number.
I'm trying to emulate cell phone voicemail where you call your own number to
check your voicemail.
-- Accepting AUTHENTICATED call from 65.182.165.XXX:
> requested format = gsm,
> requested prefs = (),
> actual format
2003 Mar 12
1
Samba BDC and secrets.tdb question
I have a question about setting up a samba BDC
(with a samba PDC).
I am running Samba as the PDC on a small network.
Other Unix boxes on the network are running
with:
security = DOMAIN
encrypt passwords = Yes
update encrypted = Yes
password server = 192.168.1.5
So they make use of the PDC for smbmount and smbsh
applications. The W2K box also uses Samba at the PDC.
I want to set up a Redhat
2011 Aug 01
1
Problems with AMI connections (Asterisk 1.8.3.2)
Hi guys, I hope you could help me.
I am trying to get connected through AMI but something is not working. Both
php code and manager.conf were working well in asterisk 1.4
1. Sometimes it gets connected and sometimes it doesn't:
== Connect attempt from '192.168.25.241' unable to authenticate
== Connect attempt from '192.168.25.241' unable to authenticate
== Manager
2006 Feb 27
1
Problems dialing to another Asterisk server
Hi,
I have a problem dialing a SIP phone which is logged in as different
Astesrik machine from the one I am working with.
I want to call a phone in Another astersik machine in , if it answers,
calling a SiP phone registered in my ASterisk:
My dialplan is:
[mariaSIP]
exten => _1.,1,Wait(1)
exten => _1.,2,Dial(SIP/6021@192.168.0.51:5038,20)
exten => _1.,3,HangUp()
exten =>
2005 Oct 16
4
Cannot telnet to port 5038 on asterisk
Hi,
I cannot do the following:
telnet 127.0.0.1 5038
I get connection refused and this is preventing AMP from installing. I
had this working when I was using FC3 but I had to upgrade to FC4 for
another application. So I am running PHP5, MYSQL 4 with FC4 and asterisk
is running (I had this problem before with FC3 and it turned out
asterisk was not running) I am using 1.2.0 beta1 Asterisk
2005 Mar 11
1
Manager (5038)
I am using this site
(http://www.digium.com/asterisk_handbook/manager.html) to access port 5038
(manager port). But I have problem below.
Is there another step that I need to do?
-----------------------------------------------
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Asterisk Call Manager/1.0
Action:Login
Username:theuser
Secret:somepassword
Response: