similar to: cisco 7940 + sccp issue

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I've been playing around with a cisco 7940 phone. It seems to like talking to Asterisk with the chan_sccp plugin. The only problem is that it tries to call out to a SEPXXXXXXXXX.cnf.xml file to verify it's configuration. I've found docs for SEP*.cnf files, but not .xml ones. Does anyone have a .xml file for a 7940 (Skinny?) phone that I can start with? ...Jeff

Anyone have the 7970 xml config for sip yet? Aaron

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

2 new Cisco 7960 phones are requesting a CTLSEP file, seems like I triggered the universal application loader. I want to load the sip image 7.2 According to this Cisco information: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps4967/products_upgr ade_guides09186a008022a968.html#wp1047292 If the CTLSEP MAC file is not present or is empty, the phone proceeds in nonsecure mode with the

Hi, My apologies for the OT. My googling came up empty and hopefully there are some members in the community that could give me a hint how to solve this issue: Cisco 7961 with SIP firmware 8.3.3. Needed to downgrade it to 8.0.4SRS2. The downgrade process started off good. The 7961 got it's IP address via DHCP, found it's SEP<mac>.cnf.xml file and started to "upgrade"

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

hi, I'm trying to configure a Cisco IP Phone 7911G in order to work with Asterisk. I have loaded the 8.3.3 SIP Firmware of Cisco through a DHCP and a TFTP server. All seems ok but a file that is downloaded : term06.default.loads (I understand that is for 7906 model) instead of term11.default.loads (I understand that is for 7911 model). In any case the phone reboots well. At this moment I

Hi list, I have bought some Cisco 7941G-GE IP phones and want to use them with asterisk. Before bying I tested the whole setup with three different models of the old 79X0 series (a 7912, 7940 and a 7960). Flashing the formerly provided SCCP-Image to SIP was no problem, but now it complains about a nonexistent CTLSEP<mac>.tlv file. Most of the howtos say something about an empty file but

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

Dear Asterisk People, I am having problems putting a SIP image on a 7970. I was wondering if anyone can help? First problem is the phone is running version Load IDJar70.2-5-47-17.sbn Boot Load ID7970_64054100.bin Version5.0(0.6S) So I did read that you couldn't simply put the latest SIP image on such an old phone and a newer firmware version should be used. I got

Does anyone know what triggers the 7970 to update its config? I was able to get it to update to SIP, but the config I used initially won't go away. I am making small changes to the SEPxxx.cnf.xml file and rebooting the phone, the phone is downloading the (TFTP) new config file, but I don't see any change on the phone itself. I've looked at the VersionStamp and incremented that, but

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

I have a Cisco 7940G IP Phone. I am trying to load the firmware to SIP 3.2. The Phone just hangs in Defaulting CM to TFTP Server. It doesn't do anything else after that. I also have two other 7940g's that are the Universal Application Loader mode and say Protocol Application Invalid. I need to know what I can do to fix both these problems. I am running Asterisk@Home version 1.0. I have to

I have a done google seaches on convertion and so far they all failed. Rich adamson and wheely-bin.co.uk Here is what I have Laptop running solarwinds tftp with the following files OS79XX.txt <- POS30201 SIP<phonemac>.cnf.xml RINGLIST.DAT <-Ringer1.pcm Ringer1.pcm The phone (7940) is hardcoded to the TFTP ip of the laptop and has a hardcoded ip is was on firmware version: