similar to: Any SIP hardphone recommendations?

Greetings all, We are settng up a fair sized call center on Asterisk, but we are having some issues with our agents not knowing if they have logged in and logged out. Prior to beginning our migration to VoIP the agents logged into our nortel phones and confirmation was displayed on the phone. My question is has anyone out there done anything from Asterisk that can change the display on

I have been testing * with some Cisco 7912G's, in hope to trash our Nortel system. One feature our Nortel system has that I will need to fiqure out on the * system is paging. Is it possible to page a group of phones (all phones) with announcements? We are a k-12 school and we use our current phone system to make announcements on the phones monitor speaker. Any direction I can be pointed in

agc_gain seemed to fit with the idea of what I wanted to do, it was easy to understand its units and behavior, and freezing it produced the desired results. Also I wanted to cap it, so that's done at the same place, and that definitely works. All I want to do is be able to freeze AGC adaptation and put an upper bound on the AGC (for example, 2x amplification). Both of these things seem

Hello, I'm having the following problem when using a headset on XP connected to an on-board Realtek soundcard on an AsusTek M2N68-AM Plus motherboard: - Using any sound recorder (Windows', Audacity, XLite), the level is just too low when speaking at a conversational level, even with the microphone level pumped all the way up (line displayed totally flat in Recorder)

I'm looking to purchase and deploy a bunch of hardphones for agent use. The phones will have to register with Asterisk and/or SER, depending on where the phones go. They need only one line, G729 codec, and no super fancy features. Preferrably something that is easy to provision. I would think the BudgeTone would be good, but then I've read so many people complaining about them, and some

Full_Name: Michael Aaron Karsh Version: 2.8.0 OS: Windows XP Submission from: (NULL) (75.61.102.255) Whenever I try changing a function, it keeps coming up with the same error message. I have the function CN_state_log_sum=function(Tot_log_sum){ #estimate copy number state for the log sum approach if(((Im(Tot_log_sum))!=0)|Re(Tot_log_sum)<=log(1/4)/log(2)) {return(0)}

Hey all, I've setup my asterisk install on a CentOS5 server, I've got a few IAX2 and SIP softphone clients connected on the same subnet and at least 1 external IAX2 softphone. However I'm having some difficulty getting the Polycom hardphone to function correctly. Watching the logs and debug trace it: - Registers correctly - Is able to make calls to other peers However it is not able

This is Off-Topic for Asterisk, but I wanted to get some feedback on headsets for Cisco 7940/7960 phones. We have about 10-20 people who wants/needs a headset for their phone & was hoping to collect some real-world input. Thanks!!

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Well I am entering into a realm that I don't know. 3 sites with Asterisk 1 site with Nortel Asterisk/Sip calls working fine between the 3 sites. Asterisk to Nortel set calls working fine. (call comes from asterisk to nortel and rings telephone, people answer and talk happens, hangup call clears) Nortel to Asterisk. Set on Nortel gets a busy signal. Any suggestions on what to look

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? Or any Nortel "sip" products? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back

Hey All, I have an Asterisk box connected to a Nortel Option 11C via a T1. In the Asterisk box we have a Sangoma A101C and in the Nortel we have a TMDI card. The Nortel is also hooked to the PSTN via a T1 on a different NTAK09 PRI card. I've included the Zapata.conf and zaptel.conf files below. Our issue is that when a call is sent over the tie line between the two systems, the audio on the

Full_Name: Kjetil Kjernsmo Version: 0.65.1 OS: Digital UNIX 4.0 Submission from: (NULL) (129.240.28.172) I'm experiencing problems with rpois. Occasionally, it draws a very high number. Yeah, I know, this is statistics, things like that does happen, but this really strange because a poisson distribution with a parameter of 3 shouldn't see the number 1932 very often, but the same,

I am trying to integrate a Nortel Norstar system with an Asterisk service using a TDM04B card (4 fxo). So far everyting works from Asterisk to Nortel. The problem is when someone dials from the Nortel PBX to the Asterisk server. Asterisk answers the call and provides a dialtone (with DISA) but appartently the DTMF tones are not passed to asterisk and the call cannot proceed. This only

I am using asterisk 1.4.32 and wish to connect using SIP to a nortel 1000 switch with the ability to have 90 calls at a one time outgoing or incoming. the nortel reseller is asking me what to do. I dont know nortel at all. I thought I just needed a "SIP trunk and IP address of the their server and an account name, and provide her my IP address". They didn't know what to do with

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the

Hey gang, I'm looking at escaping from a Nortel Meridian CISC system to Asterisk/Digium/SIP phones. I'm currently in the testing and proof of concept phase. I'm going to need a SIP phone and don't want to re-purchase and have "orphans" around. We currently run Nortel 7310 phones and they work great. I'm sort of overwhelmed by all of the different IP phones. I

I need help on my zaptel.conf and Zapata.conf for a TE207P I'd like Span 1 to receive a PRI from the phone company(US PRI). I'd like Span 2 to interface with a Nortel Phone system as a PRI(acting as the phone company) Essentially my asterisk box is a man in the middle intercepting calls from the PRI passing certain DID to the Nortel, also intercepting calls from the Nortel passing them