similar to: HDLC bad FCS

Hi fellow asterisk users, I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel module) an approx. 100 snom320. The whole installation is running without issues since 5 months. Without having changed anything on the asterisk server for at least 2 months, i noticed "clicking sounds" at external calls over the PRI. Asterisk constantly throws the following messages: ...

Hello, I've got a running system in which logs are full of messages such as: [Jun 10 07:24:14] NOTICE[2414] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 The strange thing is those messages are coming from a single span. My setup is : Asterisk 1.6.1.18 Junghanns OctoBRI with wcb4xxp driver libpri 1.4.10.2 dahdi 2.3.0 3 BRI lines in PtMP mode What does this

I have an * box connected to a Nortel SL100 through a PRI (US) using the Digium TE410P (quad-span T1 card). I don't have access to the SL100 - it is handled by another group. The span comes up OK (timing, framing fine). However, as soon as the D channel comes up, I get endless "HDLC Bad FCS" errors. I modified logger.conf to get rid of the messages (so I could see what else was

hello my friends, when i make a genzaptelconf i get this message ******************** CAS signalling on span 2 conflicts with HDLC with FCS check on channel ******************* Any idea Please? I m installing zaptel 1.4 i checked in "http://bugs.digium.com/view.php?id=7860" that it's a bug but beacause i m a newbie in asterisk i can't undrestand what exactly mean Thank You

Hello, I get an Error every minute on the second card of two installed TE410P Cards in our System. The error is: PRI got event. HDLC Abort (6) on Primary D-channel of span 5(-8) PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 5(-8) Is it possible that there are known problems with 2 cards in one system? I'm running Asterisk/Libpri/zaptel from SVN branch-1.2-16008 I was

---------- Forwarded message ---------- From: Jan Prunk <janprunk at gmail.com> Date: Sep 13, 2007 3:35 PM Subject: Bad FCS error To: asterisk-users at lists.digium.com Hello ! I am getting the following error in asterisk logs: Sep 11 17:33:30 NOTICE[2187] chan_zap.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 Sep 11 21:45:08 NOTICE[2187] chan_zap.c: PRI got event:

Dear All, we have installed a TE410P card on a Dell Poweredge 1750 running a slackware 10 with 2.4.26 Kernel. Then we have made two loops on the card and we have configurated all the 120 channels. Our goals was to perform some stess tests even if in this scenario we used the same box as generator and target. The stress test comprised to generate up to 60 calls at the same time by placing a file

Hi all, After running fine for a few months now asterisk seems to hang frequently , still functioning but the DAHDI channels seem busy (users report a busy signal when calling or being called) A reboot will allow it to run for another day or maybe 2 or 3 till the problem occurs again. running stock Asterisk 1.6.2.9-2+squeeze2 on Debian with stock kernel 2.6.32-5-686 i get the following

Hi, Does anyone have any good empirical data suggesting what the maximum number of PRI calls (incoming and outgoing) without hardware echo cancellation can be handled on a single box is? I have a TE410P T1 (1st gen) card and I'm seeing interesting errors of D-Channels going down and then coming back up (See below). I've looked at the number of simultaneous calls at each of these points,

Hi!, this issue makes me crazy. I read a lot of docs, also * mailling list and I try a lot of things without success. Any help will be appreciated. Here is the info: Hardware: -------------------------------------------- Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon 5050 Digium TE110P Software --------------------------------------------- Asterisk version 1.2.12.1

I am trying to test out my PRI configuration on a server by conection another asterisk server to it. I have the T-1 cards up and both set to bchan=1-23 and dchan=24 in zaptel.conf I am getting lost on the signalling in zapata.conf. using pri_cpe makes sense for my target box, but I am getting the following errors on my source box if I use pri_net or pri_cpe signalling. May 31 17:15:06

On Wed, Aug 03, 2005 at 11:28:19AM -0500, asterisk-users-request@lists.digium.com wrote: > 10. Inter-Tel AXXESS failure: HDLC Bad FCS (8) on Primary > D-channel of span 1 (Gavin Hamill) > Date: Wed, 3 Aug 2005 15:32:48 +0100 > From: Gavin Hamill <gdh@laterooms.com> > Subject: [Asterisk-Users] Inter-Tel AXXESS failure: HDLC Bad FCS (8) > on Primary D-channel of span

Hi, After upgrading to DAHDI 2.4.0 from Zaptel, I noticed a lot of HDLC errors on my console: [Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 [Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 These errors prevented calls from being made and received on my PRI spans. This seems

Hi all, as good? I am trying to go up a board TE110P with link E1 ISDN PRI to establish connection with a central office Siemens HiPath 4000. But I am having the following errors: Server1:~ # asterisk -r Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'

How often do you guys see Event 6 and 8 on your PRI? (aka "HDLC Abort" and "HDLC Bad FCS") Is this normal? I would think not. bkw

I'm running asterisk 1.0.3 and seeing occasional messages on the asterisk console that say: Dec 18 09:09:55 NOTICE[26411]: chan_zap.c:7381 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 or Dec 18 09:25:46 NOTICE[26411]: chan_zap.c:7381 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 They don't see to have a noticeable impact

Hi, We currently have an Asterisk box (P4 2.4 Ghz, 512Mb RAM, 1 T100P, Zhone Channel Bank and 1 E100P) connected to an ISDN running without any problems. That machine is working for about 1 year. Two days ago, we decided to switch that machine for two PowerEdge 600SC (HA) and we got some problems. The running machine (P4 2.4Ghz) has an Intel motherboard with four 32-bit 3.3v PCI slots,

Hello list, We're currently facing some issues concerning T.38 gateway faxing. This is a device used almost exclusively for receiving faxes. Calls are incoming to asterisk on a SIP trunk (sangoma netborder) using G711A. Gateway mode is activated in the asterisk dialplan towards a Cisco SPA 112 running firmware 1.3.5. We are using asterisk 1.8.13.0 with the T.38 gateway patch applied (I know I

Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. "cas

I'm running Asterisk 1.2.26.1 svn rev 79171 on Trixbox 2.2. libpri 1.2.7 and zaptel 1.2.22.1. The hardware is a HP dl360 single cpu with a TE220B. The system load is below 0.10. I moved the server into production, with one PRI, on Friday. On that day we handled a couple thousand calls and I only saw one HDLC abort message. On Saturday half the calls and two abort messages an hour