similar to: mgcp fon behind NAT gw

Hi Jean-Marc I'm looking at the 1.0.5 source, and I'm not seeing an _spx_lpc(). There's an _spx_autocorr(), which is in lpc.c and is called near the start of the encoder function in nb_celp.c. The encoder seems to call the autocorr() function, then calls wld() to do something called Levinson-Durbin. Am I right in thinking that after the call to wld(), the st->lpc[] array

Hi everyone! It's my first time posting to this list, and I've got a fairly technical question. I'm interested in doing phoneme extraction, and one of the first steps in the algorithm I'm planning to use is to get the LPC coefficients for an input frame. Since Speex is CELP-based, the coefficients must be generated in there somewhere. I've tried digging around in the source

I'm trying to use a 4 port ATA that was designed for use with MGCP 1.0 / NCS 1.0 -- is the channel_mgcp compat with NCS -- anything I can do to make it compat?? This is what happens - below *CLI> mgcp reload Reloading MGCP == Parsing '/etc/asterisk/mgcp.conf': Found Use EXIT or QUIT to exit the asterisk console == MGCP Listening on 10.1.22.39:2427 == Using TOS bits 0 mgcp

I know this is not the most appropriated list to this, but I will try: Does anyone know what is the criteria to the generation of the transaction identifiers in MGCP? I mean, are they generated by a randomic method? I'm using Asterisk and MGCP eyeP Phone and observed that the RSIP and NTFY (methods created by the gateway) use high values in the transaction identifiers, while the RQNT, AUEP,

I've got a ShoreTel 210 MGCP phone drops calls. My packet capture indicates that the phone may be trying to renew its registration with *, but reports Restart Method of Disconnected (frame 2), then * seems to take that as a sign that it has lost the connection and closes things down. The phone, meanwhile, seems to think it can continue the conversation until a few ICMP "port

I'm not sure that the problem lies in the NAT because the phone is talking to Asterisk. I'm hoping this is a simple config thing I've overlooked but I've tried all kinds of combos inside the [] in my mgcp.cfg file. The phone's IP is 192.168.1.116 (my comp is .110). The router to which the phone and my comp is plugged into has a WAN IP of 10.0.0.28. All the other comps (and SIP

Does anybody has the expirience configuring Asterisk with Cisco ATA 186 MGCP firmware ? I have Cisco software v3.1.1 atamgcp (Build 040629A) Asterisk 1.0-RC1 On ATA i only put domain test. mgcp.conf looks like this [test] host = 192.168.195.55 context = default line => aaln/2 line => aaln/1 Asterisk CLI shows this: Jul 31 16:05:40 WARNING[135449600]: chan_mgcp.c:485

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres the DNS IP of the MGCP box and DNS State disabled (not sure what to set it to) --

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, 2018-11-20 at 13:32 +0000, lejeczek via CentOS wrote: > hi guys > > I've one box where I just yesterday upgraded Centos. I > wonder if that kernel upgrade process might somewhat > troublesome. > After that upgrade UEFI boot fails with: > > Failed to set MokListRT: Invalid Parameter > Something has gone

Hi! I am running Version 2.3.2 together with liquid soap on a debian System. everything works fine. What is the easiest way to upgrade? Save the config xml and web-folder, uninstall 2.3.2, install the latest release,restore the config xml and the web-folder? Are there known issues with the latest release and liquid soap? Thank you very much! Peter Roehl -- Peter R?hl Phone: 0361

We are using an MGCP configuration. There seems to be some incompatibilities between our Netergy T2 VOIP chip and Asterisk. This is how our Vendor sees it: Here's what I see. 1. The first call is initiated. (CRCX) The interesting thing here is that the CA (Call Agent) tells us to go directly into sendrecv mode which means that we start streaming audio immediately. All other CAs that

hello everybody in this great mailing list , i have some difficulties to follow my code . i solved some problems thanks to Carine Liang , but i still have one problem and i think it is fatal one. when i encode the voice data in a wav file it is decoded without any errors it gives me 84 bytes wav file size for 139 kbytes wav audio data .Naturally i wanted to return my file back to its normal

Hi, I need to use a custom .fon bitmap font under Wine, but the only way I can get it to work (having converted it to a .pcf according to the docs) is to use X11 font rendering - ie. removing all the TTFs from my pseudo-c:\windows\fonts directory. I've tried things like putting the .fon file (and the converted .pcf files) into the fonts directory, but it's not seen by Wine. Is there a

dear friends, How can I use fonts in .fon file while running application with wine. The application running under windows looks better than application running with wine under Linux since wine has used the alternative fonts. The default date format setting under wine is M/d/yyyy I want to have dd/MM/yyyy where do I set ? in general where do I set "regional setting" ? Best Regards

I'm trying to run a program under wine which includes three fonts which are installed by the program. Two are TrueType and they work correctly. The other is a .fon font, but when I run the program, every character displayed in that font looks the same - the glyph whose code is 0x80 seems to be used to represent every character. I've looked at the font using fontforge and there

Hi there, T'was a few months since I checked archives, I didn't see any mention of ASIFONT.FON back then anyway. Thing is I've been trying to run a few older Macromedia productions (childrens games mostly). They rather consequently fail with something like this: (example taken from a rather new (cvs)winex, but behaviour has been similar for ordinary wine as long as I can remember)

Hi, I tried to convert win fon fonts to linux pcf fonts using fnt2bdf as it is described in the wine documentation. On some fonts fnt2bdf said rthat there is no charset set information in the fon file so that the -c option has to be used. But what charset option should be used for such fonts? fnt2bdf's help does print out a example where -c winsys is used, but never prints out all

Hi, Don't have my Linux box with me at the moment... But could you tell me what app does need this font ? Will look at it tuesday evening, but if i remember correct, it loads when using fontview. Do you have the last version (CVS is better), because some improvement have been made in fonts these weeks ? --- Emidio Reggiani <emidio@cpsoftware.it> a ?crit?: > Hallo Sylvain. >

Hello everyone, I've some stange problems with my "AVM FritzBox Fon" (http://www.avm.de/de/Presse/Informationen/2004/2004_06_22.php3) and Asterisk. I want to build up an internal SIP Network for testing purposes. I can phone with my Grandstream BT-101 to other BT-101 or SIP-Software, but not to my AVM FritzBox Fon. It looks like the Box connects successfully to Asterisk, but you

Just came by this link So I'm posting to keep the community informed. I don't use or endorse this product. I'm just letting people know about it. http://www.indosoft.ca/audioconferencesystem.htm Audio Conferencing System & Teleconferencing Solution that connect seamlessly over TDM and IP networks. This audio conference system include a comprehensive set of features and easily