similar to: Errors Question

We have install a DS3 with 28 DS1's we have an Adtran MUX breaking out the DS1's, we are trying to setup the system with 2 dchannels for each 4 DS1's. Everything looks fine when modprobe zaptel and wct4xxp and ztcfg -vvvvvv but when I asterisk asterisk it says: Aug 10 16:33:32 ERROR[8954]: chan_zap.c:6750 mkintf: Channel 24 is reserved for D-channel. Aug 10 16:33:32 ERROR[8954]:

Hallo da mein English nicht so gut ist und bei der ?bersetzung auch noch Missverst?ndnisse auftretten k?nnten, hier das Orginal :-) Das Problem ist, dass bei der Kombination openssh pam und ldap, die Verbindung zum Ldapserver so lange offen gehalten wird bis die ssh Session geschlossen wird. Das ist nur bei SSH so ! Alle andere Dienste sprechen den Server an und schliessen nach Best?ttigung des

Hello, Does anyone have experience backing up their samba SMB shares with an NT-based backup system? I'm using Seagate Backup Exec 7.0, and whenever I select a share on Samba, I get a message saying "Unable to connect to server, <F5> to retry", and then another one saying "A device specefic error occured". My samba shares are all fully operational (I can access them

Hello everybody, I am wondering if libvirt community implement features specefic to only one supported hypervisor? I am trying to set the host name and DNS from within the libvirt xml file in user mode network option (SLiRP). Right now I am using the <qemu:commandline>. My concern is if I want to use Xen or other hypervisors, how I should do the same. To be honest, I have not used any

Hi,?When installing packages is there any?preferable path. In my case I got this message in R consol:The downloaded binary packages are in? ? ? ? ?C: ~\ Temp \ RtmpQLTD5e \ downloaded_packages this is a temporary files that I delete every time. Is it possible to install packages in a specefic folder. [[alternative HTML version deleted]]

Hi: I'm using a te110p E1 card in Spain. There is way to change the dchan channel number? Here in Spain there is a voice company that works with dchannel in channel number 31. I must to set channels from 1 to 30 and dchan to 31 but when asterisk loads the chan_zap.c it says that channel 16 is reserve for dchan. Can you help me? Cheers. -- Jos? Luis Garc?a Ext. Pineda 2002001 Ext.

I've been going back and forth with my telco for several days, trying different configurations to get a new PRI to come up. The bchannels are all up and the T1 is not in alarm status. The dchannel refuses to come up however. We've tried ni2, qsig, and now dms100 for the switchtype. The telco tech I've been working with says that he's been sending "reset all channels"

I am still battling with my project :( I have a line like this lm(month.model$next.ret~.,month.model,na.action=na.omit) month.model is a data frame with lots of columns. One of them is "Oth", a dummy variable. I checked month.model, there are two rows with number 1 and others are either 0 or NA. the two rows with Oth==1 have no NA. I have totally about 900 rows. But after the

Hello to everyone on the list, This is my first message sent to the list so bare with me on this one :) I've started learning C++ of September of last year in school. I think I'm fairly competent(I Hope :) at it and we were recently discussing bloatware in class. Vorbis seems so large and complex that I offen get intimidated, so I was wondering if anyone else would like to

We have integrated an Asterisk (TE110P) and a Mitel SX200. We usually get over 500 frame errors and over a 500 slip errors per hour. When the errors reach 1000 per hour the Mitel will take it's T1 card offline. At that point no calls can be routed from the Asterisk server to the Mitel and the TE110P reports a Yellow alarm. What can be causing all these Frame and Slip errors? We have been

Hi guys, Currently I just purchased the TE205P for the installation of my ISDN30 setup. I compiled, setup the card correctly I think. When I do the ztcfg -vvv it shows all 31 channels clear, with 30 bchannels using for voice ranging from 1-15, 17-31, and 16 is the dchannel. However, when I do a cat /proc/zaptel/1 I see only 24 channels configured, and then, when I do a cat /proc/zaptel/2 I see

Hi! I have problems with the ToN configurations in chan_capi-cm. I understand how incoming calls are rewritten using national and international prefix. But for outgoing calls - what is the ToN? Further, is there any debug info of the Ton? "capi debug" and the divactrl dchannel both show the CLI and CDLI, but do not show the ToN. How can I set the ToN? I suspect chan_capi to use the

Hello all, I spent a couple of days figuring this out, and I found some related posts without solutions, so I figured I would sent this to the list. We run a small local network here with a mixed bag of Windows XP / 2000 / Linux clients. We have been using Samba to allow access to a set of shared printers using a linux server. We also have a separate linux server that handles our file serving

Hi (Armin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log

I am trying to install swatch via yum but it doesn't recognize swatch as being available. I have tried various naming conventions such as swatch-3 etc but still no go. I have Dags repo in yum.conf and I see it listed there on his webpage. In addition, I did a yum search swatch and still nada. Anyone have an idea as to why it will not install? I'm running CentOS 3.5 Thanks, Ed

I've read as much as I can on this error and still can't seem to figure out what's causing this error: Jun 23 20:54:58 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jun 23 20:55:03 NOTICE[7483]:

I have an init script that after running, causes my terminal not to log out cleanly. Here's what i mean: # /etc/init.d/script restart << this runs fine, returns my shell prompt # exit << When I enter this command, my shell window just stays "stuck" and actually won't close down. Anyone know why this happens?

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

I'm running CentOS 4.4. I'm trying to install swatch (a log watcher) using CPAN. It's getting hung up on trying to install a dependency, Pod::Simple So before I get too wrapped up in this, I have the following questions: 1. Is there an alternative way to install swatch? I didn't get a hit when I tried yum. 2. I'm not wedded to swatch. Is there another log checker

Hi I have problem with TE121 Digium card. I connected it to modem keymile Music 200 (provided by telco) but I can see 2 red lights on modem (both bellow words rx) and my card is red too. I tried to make experiment and made loopback (pins 1 4 , 2 5) and put it in card and card become green (I hope that is sign card is ok) but on CLI i can see following error message WARNING: We think we are cpe but