Displaying 20 results from an estimated 4000 matches similar to: "Got this error after my installation when i doztcfg -vv"
2005 Jun 30
0
Got this error after my installation when i do ztcfg -vv
how can i solve the error on the last part?
need help. thnx...
Zaptel Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: Individual Clear channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves:
2005 Jul 20
1
ceptral (swift)
Hi i installed ceptral and i want to test it with asterisk can u plz
tell me if i was wrong here>> ??
exten => 2,1,Answer
exten => 2,2,system(/opt/swift/bin/swift "hello world")
exten=> 2,3,Hangup()
Mahmoud Badran
ATSI
Tel: +20 2 607 8917
2005 Sep 07
1
ztcfg Kills My Dial Tone
I'm using two Rhino channel banks (first 12FXO/12FXS, second 24FXS).
These connect to a Digium TE210P card. I'm running kernel 2.6.10
and I've tried Asterisk (w/zaptel) 1.0.9, 1.2 beta, and CVS from today.
The results are the same for all versions:
Right after I reboot, and modprobe wct4xxp, my analog phone connected
to port 13 of the first channel bank (first FXS port) gets a dial
2020 Oct 22
1
Digium TE134 compatibility issues with new Dell server - Zero interrupts
I am getting zero interrupts for a new Digium TE134 Card on a new brand new
Dell T40 server with the latest BIOS. Is there something that I am missing
or is the card not compatible with Dell servers?
(cat /proc/interrupts ; sleep 1 ; cat /proc/interrupts) | grep -i wcte13xp0
16: 0 0 0 0 IR-IO-APIC 16-fasteoi
i801_smbus, wcte13xp0
16: 0
2012 Jun 03
1
Dahdi 2.6.1 with OSLEC support
In order solve my incoming caller ID problem, I upgrade the dahdi to
version 2.6.1 from version 2.4.x. After upgrade, I found the echo
cancellation doesn't working (I'm using Digium AEX800B PCI Express card). I
can hear my self talking on the phone. How to solve this? I think I need to
recompile dahdi 2.6.1 with OSLEC support? how?
[root at callcenter ~]# dahdi_cfg -vvv
DAHDI Tools
2006 Feb 19
3
Asterisk start errors with TDM2413E
I get the following errors when starting Asterisk.
== Parsing '/etc/asterisk/zapata.conf': Found
Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to
specify channel 1: No such device
Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open
channel 1: No such device
here = 0, tmp->channel = 1, channel = 1
Feb 19 21:14:35
2004 Dec 02
0
E100P not starting?
Hello
I have installed my new E100P card in the same machin with two TDM04B cards.
I have followthe instructions on
http://www.digium.com/index.php?menu=configuration#T_E100P_PRI
This is my zapata.conf
span=1,0,0,cas,ami
fxsls=1-15,17-31
dchan=16
fxsks=32-39
loadzone = us
defaultzone=us
I do *modprobe zaptel wct1xxp wcfxs
ans seems to work ok.
*
But when i do
ztcfg -vvv
i got
Zaptel
2006 May 09
2
Problems with TDM400P and FXO modules
Hi , I have an asterix (1.2.7.1) box with 3 TDM400P and 10 FXO modules, and
zaptel (1.2.5).
The problem is that 6 modules can't be initaized and i get the folowing
error:
May 7 09:17:37 WARNING[7739] chan_zap.c: Unable to specify channel 9: No
such device
May 7 09:17:37 ERROR[7739] chan_zap.c: Unable to open channel 9: No such
device
here = 0, tmp->channel = 9, channel = 9
ztcfg output
2008 Mar 27
3
problem about voice when using TDM2400p with VPMADT032 echo canceller module
hi you,
I'm having problem with voice quality on my trixbox using TDM2400B.The trixbox is connected via 20 FXO ports on a TDM2400 with the hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a 'background crackle/buzz' coming back when they talk.
anyone have the same problem? pls help me. thanks a lot.
my trixbox and config
2003 May 01
1
TDM cards and Asterisk
I have put a box together using 2 X100P and 2 TDM400 4port cards.
Using the simple setup that Martin posted a few days ago, I have
asterisk almost up and running.
/etc/zaptel.conf
fxsks=1-2
fxoks=3-10
loadzone=nz
defaultzone=nz
(I have added NZ tone information to zaptel and Asterisk - I'll submit a
patch soon).
/etc/asterisk/zapata.conf
[channels]
context=incoming
signalling=fxs_ks
2010 Jan 18
0
TDM2400P "Unable to set SW Companding on channel .."
Hi:
I?Bought TDM2400P ,with 24 FXO ports , I installed? the asterisk 1.4.28 and?dahdi 2.2.0?and then i compiled them and configured all, i pluged into 8 pstn line into the Rj connector and then i got messages on asterisk console that alarm cleared on channels 1->8??, at this step everything should go fine ,but when i try to make a call?through the TDM?there is silence and no audio,and then i
2004 Sep 21
0
Segmentation Fault TDM22B & TDM04B
Hi all, i have installed two digium cards on my asterisk box a TDM04B & TDM22B. The channels are configured as show below:
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06:
2008 Mar 18
1
Sangoma FXO/FXS config
Hi all,
I bought a Sangoma A200 card from an online supplier and explained
exactly what I wanted,
3 incoming phone lines to PBX and a life line (some where to connect a
standard BT phone to the PBX incase the power goes, making the BT
phone ring).
I was told to order
1 x FXS module (2 FXS ports)
2 x FXO modules (4 FXO ports)
However being a complete noob, I have connected the 3 lines to the
2005 Jun 26
3
cdr and billing
Hello ;
how can i enable billing only while using specific trunk (ex:zap) but
internal sip calls will not be counted specifically how to make all
outbound is counted i am using asterisk mysql cdr enabled
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050626/0faf0974/attachment.htm
2003 Nov 05
1
Beginners help
Hi,
I recently purchased two X100Ps and a TMD40B. I have set everything up
according to the instructions however I can't get asterisk to pick up an
incoming call (It just keeps ringing). Also, when I pick up an internal
extension I get dead air. I searched the mailing list for 3+ hours -- What
am I missing?
Thanks in advance for your help.
Here are the installion steps that I used:
2013 Nov 23
1
DAHDI Missing '/sys/bus/astribanks/drivers/xppdrv/sync'
Hello group,
I am installing Asterisk on a new pc running Ubuntu 12.04.3 Server. ?I have dahdi-complete-2.7.0.1+2.7.0.1, and have tried 2.6.1 and 2.8.0-rc1 and 2.8.0-rc2. ?I am following along in the ASTERISK The Definitive Guide 4th Edition and on page 116 when I issue the command $ sudo /etc/init.d/dahdi start I get the following error:
Loading DAHDI hardware modules:
? ?wctdm24xxp: done
2010 May 23
2
Dahdi problems with kernel 2.6.32
Hi. I am having problems with dahdi using kernel 2.6.32. I am using
2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv
++ dahdi_cfg -vv
DAHDI Tools Version - SVN-trunk-r8670
DAHDI Version: SVN-trunk-r7445M
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 04: FXS Kewlstart
2007 May 21
1
CAS signalling conflicts with Clear channel
Hi,
My asterisk server was working with a 4-FXO analog
card (TDM400P).
I recently added two digital cards: a TE120P (1 PRI)
and a B410P (4 BRI).
The B410P is still unconfigured but inserted in a PCI
slot.
The TE120P's jumper is set to E1 as it will connect to
a commercial PBX's PRI card also configured as E1.
My analog channels used to be 1-4 but since I added
the new cards I changed
2005 Jul 12
3
Help Configuring TDM04B
Hi:
I had an fxo card from Digitnetworks and it was
working fine on my Asterisk box. I then replaced it
with TDM04B. I changed the zaptel and zapata to
include the four channels. When I run ztcfg, I get
configuration errors:
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04:
2003 Sep 13
1
ZT_CHANCONFIG failed on channel 1: Invalid argument (22)
no matter which way I have my /etc/zaptel.cfg
this only started happening after a yesterdays CVS update
to my zaptel source...
Line 1: fxoks=1
Line 2: fxsks=2
Line 23: loadzone=us
Line 28: defaultzone=us
<End of File>
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels