similar to: audiocodes

Does anyone have any information for me? Welinghton. Citando Welinghton Magno Guimaraes <welinghton.guimaraes at ufvjm.edu.br>: > Hello! > ? > I am setting up an Asterisk server with a Mediant 1000 (Audiocodes) > to make external links. Does anyone have any manual or instructions on > how to proceed? > ? > Asterisk ?=>? Mediant 1000 (AudioCodes) ?=>?

Has anyone used the AudioCodes MP-20x? http://audiocodes.com/Objects/Analog_Telephone_Adapter_Series_MP_20X.pdf Seems like a good device, but I can't seem to find anyone actually using them... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061022/6ca85b8c/attachment.htm

Hello my friends, I want to make fax work in the following scenario: My versions are: Asterisk 1.4.21.2 WANPIPE Release: 3.4.7 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P The E1 pri is connected to our Sangoma A102DE, we also have a SIP Mediant Audiocodes 1000 where we have some fax machines connected to fxs ports, what we need is to make fax machines through mediant

I just put in a Audiocodes Mediant 1000, which seems to be working well except for one annoyance. I am using Polycom 501's and 601',s and if I do a supervised transfer of a PSTN call where I complete the transfer before the 3rd party has answered, the PSTN party hears dead air until the call is answered or goes to voicemail. I'm not really sure where to start my troubleshooting. Any

Hi FOlks, I am trying to setup remotely an "AudioCodes Mediant 2000" MG Module 2 to work with Asterisk through SIP or H323. But since I don't the product manual, it's being a little hard. Anybody would the manual in PDF(file or URL) to indicate to me? Thanks a lot, Isamar

I have some Audiocodes units which appear to be running Linux, according to the unit's own "System Log" kern.warn Linux version 2.4.21openrg-rmk1 #2 Wed Aug 30 17:05:29 IDT 2006 However my contact at Audiocodes claims otherwise On 12/4/06, Yaniv Nizan <Yaniv.Nizan@audiocodes.com> wrote: > > > > I doubt that we are running Linux on the MP-202. Perhaps there is a

Is anyone on the list using an Audiocodes gateway with asterisk and SIP? I'm looking at that platform, but I have a couple of issues: 1) Echo cancellation. The echo that I'm hearing with an X100P is unacceptable. Does the Audiocodes do better? 2) Line signalling. I'm using Kewlstart with the X100P, but it looks like the audiocodes uses loopstart only. How does this work with

Hello, I'm helping a colleague (*) which has the following setup: ITSP --- <T.38 capable PJSIP trunk> --- Asterisk 13 --- <PJSIP>-- Audiocodes MP-112 --- <FXO/FXS> --- Fax machine My issue is the following : Audiocodes gateway reject INVITEs with 488 Not Acceptable Here It seems this gateway requires t38 settings to be present in SDP body in the very first INVITE. My

hello,all there is a AudioCodes Mediant 2000 out there. i want to realise ip to PSTN and PSTN to ip connection. after some configuration on AudioCodes Mediant 2000, PSTN to ip connecttion works. next ,i want to dial from asterisk to PSTN now. i have see the sample in the extensions.conf relevent to PSTN as follow: ; If you are freely delivering calls to the PSTN, list them here ; ;exten =>

Just a question, has anyone knows how to blank or factory reset an AudioCodes MP124-C/FSX/AC/SIP unit (it's a 24 FSX to SIP unit). I purchased them second-handed with no manuals (thank god for the internet!!) but i guess the pdf manual I have does not have the section of factory-reset. Also, any sucess stories with: AudioCodes MP124-C/FSX/AC/SIP

I have AudioCodes MP-114 and I'm trying to configure SAS (Stand Alone Survivability); when Asterisk is down the MediaPack gateway should forward the call IN/OUT through the gateway (without asterisk in the middle), but it is not working. I'm working with tech. support from the source I purchase the unit from they we are just emailing back and forth and the unit is still not working. Can

Jerry and Michael, many many thanks for your posts. Erick. On 5/24/06, The VoIP Connection <asterisk-biz@thevoipconnection.com> wrote: > Here are the step by step instructions for setting up a brand new Audiocodes > FXS gateway for use with an Asterisk server: > > Connect the gateway to a network switch and connect a computer to the same > switch. Then configure the IP

I'm having problem passing Caller ID to asterisk from AudioCodes MP-114 (FXO) AudioCodes is passing the caller ID to Asterisk but Asterisk is trying to interpret it as authentication: [Dec 31 11:41:07] WARNING[9752]: chan_sip.c:8553 check_auth: username mismatch, have <pstn-5665>, digest has <pstn-1270> [Dec 31 11:41:07] NOTICE[9752]: chan_sip.c:14316 handle_request_invite:

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body text="#000000" bgcolor="#ffffff"> <font size="+1">Does anyone have links to the most recent audiocodes

I've MP-114 that is working configured and working OK with my Asterisk but I just obtained MP-112 (2xFXS) and I can register OK with asterisk but I can only dial 3-digit extension. Anything longer than 3-digits is cut off, example I dial extension 1000: [Apr 29 10:03:30] NOTICE[3817][C-000000e9]: chan_sip.c:25902 handle_request_invite: Call from '54' (10.0.0.115:5060) to extension

Greetings... We've been having some interoperability issues between Asterisk and an AudioCodes Mediant 2000, and, well, I gotta use the Mediant 2000 somewhere. So, I've been pondering using iptel.org's SIP server (SIP Express Router) as a "front end" for PSTN calls going out to the Mediant, while using Asterisk for everything else. Has anyone done something similar, or

Anyone out there have the AudioCodes MP-108 working with Asterisk? I am able to get the channels to registers with Asterisk, but anytime I try and send a call I receive these error messages: Jul 6 15:12:10 DEBUG[1133742896]: chan_sip.c:771 __sip_ack: Stopping retransmission on '117801284512845hUxv-9991110061--17708185305@63.201.117.76' of Response 20587: Found Jul 6 15:12:10

hi guys, have anybody tried using audiocodes sip fxs against asterisk? how's the device fairing? ~kelvin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030725/ae4b2f25/attachment.htm

I was able to setup AudioCodes MP-114 to rote calls form FOX to Asterisk and make internal calls: Routing Tables -> Tel to IP Routing: *, *, 10.0.0.109 (my asterisk IP) But I'm not sure how to setup AuioCodes to make calls out via FXO? In extensions.conf [Globals] pstn-5665=10.0.0.157 Whenever, I try to call out I get a busy signal. -- Joseph

Hello, Anyone here have experience with Audiocodes MediaPack MP-108 Gateways? I would be willing to pay someone for advice and support with configuring my gateways for a telemarketing project I am starting. My experience is somewhat limited but all I want to do is make outbound calls just like I would on normal pots lines. (That's the best way to explain it) I do not need any special