similar to: Asterisk with Lucent TNT echo

I'm looking for someone familiar with setting up some of the more advanced features of the Lucent TNT, preferably someone with knowledge of Trunk Groups and choosing outgoing PRI channels based on call type and perhaps NPA-NXX We currently have 8 PRI's. 7 of them are for our dialup pool, the 8th is for our voip. We currently run the dialup PRI's to a seperate TNT We want to

I'm publishing tftp through my firewall to support external Cisco 7960 sip phones. I know that the primary port is 69 for tftp. However, tftp also uses secondary ports ranging from 1,0XX to 30,XXX. ( A broad range) In an effort to limit the secondary ports that are opened, some Windows based tftp server such as the winagents product allows you to limit the range of secondary ports that are

Hello, I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like to be able to direct an inbound fax call into my TNT, have it answer the fax and send the image file over to Asterisk, or some other system to deliver to an e-mail address(s). I'm not sure if I need Asterisk to any of the call control or not. I'd also like to setup a print queue and have outbound

Hello folks, I've been trying to get T.38 over SIP working with calls terminated by a MAX/Lucent/Ascent TNT. As far as I can tell, SIP and T.38 are actually working perfectly; however, I can't get the TNT to properly terminate a FAX call. Does anyone have a working configuration for SIP and T.38 for calls from a TNT or APX? Here's a brief description/diagram of my test setup:

Trying to use: Asterisk 1.4.2 Zaptel 1.4.0 chan_zap won't compile in asterisk 1.4.2 when used with zaptel 1.4.0. The changelog has this entry: * channels/chan_zap.c, configure, configure.ac: If we receive ZT_EVENT_REMOVED, destroy the specified channel. (issue #7256, tzafrir) Also, update the configure script to make sure that we don't try to build chan_zap

Hi All, I have a lab setup with two asterisk servers and a MAX TNT in the middle like this: asterisk sip >< sip TNT pri >< pri asterisk The TNT is running 11.0.6 and the asterisk servers are running 1.2.9.1. I can get calls to pass from asterisk sip to tnt to pri to asterisk but not the other way. The call from asterisk to pri to tnt is good, the TNT is passing SIP invite to the

we're evaluating the use of a Lucent APX8100 E3/SS7 to SIP gateway for use in conjunction with asterisk, serving something like 4000+ lines. does anyone have experience with the APX8100 and it's integration with SIP on asterisk ? does the APX8100 handle SS7<->SIP signalling well enough to be used ? any anecdotes would be well appreciated. -- Regards,

Is anyone out there using Lucent brand equipment to handle an incomming DS3, converting all 672 calls to SIP (as G729) and sending those to Asterisk/SER over ethernet? If you are and are willing to speak to my boss about your experiences (over the phone) with it, please contact me off list. We have a possible contract with a local CLEC to handle their long distance, and they want to send to

Anyone out there have success getting caller id name from a pri, through a lucent tnt, to asterisk? What about from other media gateways? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050809/d3f02c3d/attachment.htm

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

> I've got a Lucent TNT that I'm using for a gateway. Its working fine, but I > have one problem. I cannot find any place to set a ring timer, or number of > rings. The calls seem to timeout (Goes to all circuits busy) after about 15 > seconds - which isn't enough time for some voicemail boxes to pickup. I > found a setting called ringing-timer under sip-options, but

If you are looking for real high density VOIP termination I would look at > something like a Lucent APX 8000, configure correctly it can pass 2500+ > g.729 calls to the PSTN course we paid lots of $ for ours. > > Chris > Chris, My experience has been that the APX and TNT products require a single SIP proxy, how are you load balancing 2500 calls? If all of the traffic is

Hello all, We are looking for some hardware requirements/recommendations to be able to handle a full DS3's worth of TDM -> VoIP traffic. The DS3 would bring 24 calls per T1 x 28 T1s = 672 simultaneous calls. We would then need to convert those calls into G729 SIP VoIP calls to send to our asterisk box over ethernet. Since everything is going in/out of asterisk is 729, and no features

Does anyone know what application I should place this function in? For example with the DB function I currently do something like this to add an entry to the asterisk database: exten => s,n,Set(DB(AGENT/${MACRO_EXTEN:1})=${CALLERID(num)}) To delete the entries I do something like this: exten => s,n,DBDel(AGENT/${MACRO_EXTEN:1}) DBDel is marked as deprecated in favor of the DB_DELETE

I have officially engaged in a pissing contest with the local Telco over PRI calling name delivery. The telco publishes their calling name delivery over PRI feature as being bellcore gr-1367-core compliant. The gr-1367-core spec states that the calling name is to be included as a facility IE in the setup message, or sent in a subsequent facility IE message with an indicator in the setup message

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone

Hi All I have posted this problem many times on the list but no reply, trying one more time may be someone will response this time When I call from 1 RTC Client to another without Asterisk everything use to be fine but when asterisk is there as a Registrar a problem use to occur in more than 90% calls, Caller can hear the voice of the receiving side but the receiver cant be able to hear the

I've downloaded: asterisk-1.4.1 zaptel-1.4.0 I've compiled and installed zaptel. When I go to install asterisk I do: ./configure make menuselect I then take a look under the codec selection menu and I see that codec_zap can not be compiled. *************************************

Does anyone have a MAX/APX with working ingress PRI calling name? I recently acquired a MAX TNT on the cheap and it's integrating fine except for one thing. In the 11.0.0 release notes, it is stated that ISDN calling name will, if present and permitted by presentation flags, be added to the From: and Remote-Party-ID: headers of the INVITE. I'm not able to make this happen. Pcap

Hello, I'm currently testing Asterisk over a T1 cross connect to a MaxTNT chassis that we have. It is working fine switching the calls through, but there is about a 10 second delay from the time Asterisk initiates the call until the TNT accepts it. It appears to be a ANI issue, I've changed several settings and formatting options on the T1 between the two, as well as turning on/off the