similar to: No Sound at all

Hello anyone who can help I have two Asterisk boxes with identical hardware (Dev & Production). I recently rebuilt the DEV box using Fedora Core 3 and the latest CVS Head. The hardware is an Intel CA810e, onboard everything with a PIII processor. The config is pure VOIP using IAX2 & ilBC with Virbiage Firefly soft clients. I also use Ztdummy which seems to be working ok - no error

After many months of development, I'm pleased to announced Firefly - an IAX soft phone and network. The firefly softphone - free, runs under windows, allows connection to multiple networks, skinable interface, connection to firefly network, IAX2 protocol, (SIP in next release), codecs supported - iLBC, G.711 ulaw/alaw, GSM. - contact lists, selectable ringtones. download from here -

I did get it to work, and can place and receive calls through the Firefly network via *. Compared to iaxtel or FWD, there is a significantly higher amount of latency, but it is workable. For some reason, this needed to be the last entry in my iax.conf or it would try to authenticate with a different user ID when receiving calls (and obviously would fail. Relevant section from my iax.conf:

Ok I have spent the last week working on getting my small PBX to work. I will in the end only have 4 SIP extensions being either softphones of IP phones. Currently only 1 SIP config for testing. And at the this point it should be all fairly easy with all inbound and outbound to PSTN will be going Via Firefly/Freshtel.net in Australia via IAX. Inbound does work in it's current basic state.

Hi Does anybody know how to build the LibIAX2 from Virbiage? It has some nice features when using Firefly (Messaging, Status Indication). The source can be downloaded here: http://www.virbiage.com/3rdparty/. It does not contain any directions how to compile. Any hints? Thanks! Reto

There's a new firefly release out for those who are using firefly with your lovely asterisk / SIP server. http://www.virbiage.com/firefly/download/firefly-thirdparty.exe the main changes are improved GUI fixes (mouse wheel works now :) ), few url parsing fixes, mic volume control and improved compatibility with SIP servers (namely SER). Send me all bugs, problems and suggestions (even

Hello there, I've successfully compiled the G729 DLL for FireFly. However, I'd like to hook up some customers using this, and I'm not sure how I can license it. Everything seems to point to buying thousands of G729 licenses at a time (from Sipro), and the Virbiage site doesn't mention anything. Is there anyone who can sell small quantities (like Digium does for Asterisk) for

I found version 2.0.0 of Firefly on the Freshtel site, but it only has the network setup options for the Freshtel network, despite the final statement on the page http://www.freshtel.net/firefly/download/ that says: ----------------- Standalone SIP / IAX mode: If you want to use Firefly on our network (with your own voicemail etc.) you will need to register a Firefly number. However, you can

Sunday news is today published on a monday. Yesterday was fourth of july, and I used that as an excuse for being off line yesterday. (Sweden's national day is June 6th - and it's not yet a public holiday, btw). Most of my Asterisk time lately have been used for producing the registration site for Astricon and tracking down speakers that haven't sent in their material for the conference

Just a quick announcement for Firefly users that Firefly 1.9.5 is out. Mainly just a bug fix release as we get ready for Firefly 2.0. One notable feature added is DTMF via SIP INFO. http://www.virbiage.com/firefly/download/firefly-thirdparty.exe is the URL As always, send me any bugs, features or suggestions. -Adam

G'Day, I have a bit of FireFly problem that hopefully someone has seen before. What happens is if I make to or receive a call from the FireFly network the call will connect successfully. However, around 10 seconds after I answer the call I am disconnected. The weird thing is same thing happens if I make a call. I've had a look at the * console and I can't see that my * PBX drops

Hi We've recently set up and are using with success 1.0.7 using a Junghanns quadbri card to BRI ISDN, and Firefly with IAX2 protocol as softphones Works very well, however we're getting cases where sometimes the call just drops. >From setting more verbose modes we get a log which is shown below. The problem seems to be the maxretries message which comes from chan_iax2. We are using

With all the talk of SRV support in Asterisk, I thought I'd add support in Firefly so enjoy. Thanks to Olle for helping me with it, explaining the wonderful world of SIP and SRV to me. There's also an option to disable it (seems to take quite a few DNS lookups for SRV) - warning Duane may hunt you down if you do disable it though :) I've also added support for SIP via TCP and the

As Promised, I've released a new version of Firefly (ver 1.8) with IAX & SIP support back in. Get it from Virbiage site or here's the direct link http://www.virbiage.com/firefly/download/firefly-thirdparty.exe If it crashes on startup, export your Firefly tree from the registry (current user -> software -> firefly), then delete tree from your registry. If that fixes it, send

Hello All, I have been looking for a commercial version of an IAX2 Softphone for Windows but the ones I have came across (i.e. Iaxcomm, Iaxphone, Diax) do not seem to have an updated version since April 2004 in some cases. We looked at Firefly but we sent emails to Virbiage/Freshtel with questions and could never get a response from them. Has anyone got any recommendations for commercial

I have Asterisk running on a Linux 2.4.x box with ztdummy. Once I did a modprobe on ztdummy I was able to enter into a conference room using my softphone clients. I'm using SJphone and Firefly. I have noticed a significant delay (1 to 3 seconds) while talking within the conference room. I have tried both clients, SIP and IAX protocols and various codecs. I have also tried it from different

Hey Steve and everyone, I looked at the configuration, and unless I am missing something I don't think they are configured # ztcfg -vv Zaptel Configuration ====================== Channel map: 0 channels configured. In the zapata.conf file, it is the sample version, but I didn't notice anything in there that related to what you said. Or is it in a different file or location? I am

Hey list (again - annoying bastard I am) I've played with Firefly/* for a while and I have yet to find a way to have * send voicemail notification to Firefly. It appears possible using SIP (no clue whether Firefly supports it) in the sip.conf file, but there's no mention of anything voicemail-related in the IAX.conf file. I'm using IAX with Firefly, so that might just be the

Just an FYI FireFly no longer works with anything but the FireFly network. No more SIP, No more IAX. It was a damn good IAX client... too bad its crap now. bkw

How come FireFly doesn't give me an Inband DTMF option? Only RFC2833 and Info. RFC2833 is the default, so I left it that way. I also unchecked all the codecs except g711ulaw to force that codecs usage. However, when I go to place a call, I get this: Nov 3 13:18:44 WARNING[53641241]: dsp.c:1468 ast_dsp_process: Inband DTMF is not supported on codec G.711 u-law. Use RFC2833 Nov 3 13:18:44