similar to: H323 with Asterisk

Hi, We are terminating around 60 channels on one of our Asterisk boxes, which the client sends in H323 mode. Client (MERA) --> H323 --> Asterisk --> IAX --> Asterisk The problem we face is that at random intervals the H323 process (as part of Asterisk) dies and can no longer accept new calls whilst Asterisk is still running happily. We have to then kill asterisk and start it

Hi, We seem to be having some teething issues with a new Hylafax - happy to pay someone to complete the installation. Please contact offlist. Regards, Sahil Gupta Chief Executive Officer VoiceValley Group of Companies Phone: +61-7-30188403 Fax: +61-7-30188499

Hi, I'd like to know how I can playback a pre-recorded message to a user using our system without answering the call. I want to do the above in the scenario where the user dials a number and the number has been dialled incorrectly. Regards, Sahil Gupta VoiceValley

Hi, I have a Gateway running in "TE" (terminal equipment mode as "slave" that I need to connect to my asterisk server using a TE100P card. Can anybody give a quick run up of how to run the TE100P's in Network Termination mode to have this working sucessfully? Cheers! Regards, Sahil Gupta VoiceValley

Hi, Is there anybody on the list that recommends anyone for colocation/telehousing in the US? I'm after 2 Servers to be hosted in the US, preferably on the west coast. Regards, Sahil Gupta VoiceValley

Hi all I have a following problem. I want to use sjphone to connect to asterisk sip server and then I want asterisk to do a conversion to h323 and send this to h323 gateway. sjphone---sip----ASTERISK----h323-----GATEWAY Example: if someone from plane PSTN line dials 123456 the gateway will forward this to asterisk and asterisk will forward this to sjphone and the other way around. Could

Hi, We are trying to port over a PABX to our network. Both PRI's seem to be live however, whenever someone dials out from the PABX Asterisk happens to report : -- Extension '' in context 'samsungincoming' from '736327438' does not exist. Rejecting call on channel 0/31, span 2 If crc4 is turned off, it reports a yellow alarm. Any suggestions? Regards, Sahil

Try these guys: http://easyspeedy.com/ Haven't tried them, but when I was looking into a while back they responded quickly. -- Bjorn -----Original Message----- From: asterisk-biz-bounces@lists.digium.com [mailto:asterisk-biz-bounces@lists.digium.com] On Behalf Of Sahil Gupta Sent: Wednesday, May 03, 2006 1:47 PM To: asterisk-users@lists.digium.com Cc: asterisk-biz@lists.digium.com Subject:

Hi, I am currently interconnecting to a PRI using a Cisco AS5350. I'd like to be able to dial specific numbers out by a specific isdn channel, so for e.g. if I dial 999 01 12341234 it should send 12341234 out via isdn channel one from the Cisco AS5350. If somebody would be able to guide on this, it would be appreciated. Regards, Sahil Gupta VoiceValley

Hi, I'm looking for someone to do time-to-time mantainence on some of our machines going up in New York. The person *MUST* be stationed in New York. Areas of expertise required: - Proficiency in Linux: Slackware, Fedora - Proficiency on Cisco Routers If anybody is interested, please contact me off-list. Regards, Sahil Gupta VoiceValley

All, I have a problem with H323 the call disconnects when answered. The debug shows -- Executing Dial("SIP/sj1-4ff7", "H323/0797617729") in new stack -- Called 0797617729 -- H323/0797617729 is ringing -- H323/0797617729 answered SIP/sj1-4ff7 == Spawn extension (default, 0797617729, 1) exited non-zero on 'SIP/sj1-4ff7' -- Executing

Hi there, I'm wanting to source some commercial support for the setup of a series of Asterisk Boxes to work with both H323 and SIP. Could people please contact me off-list that are proficient in full setups of Asterisk with H323/SIP Support for commercial purposes ? Cheers, Sahil

Hi, I am using Asterisk 1.2.9.1, with chan_h323. The problem I am coming across is when trying to bridge an incoming H323 call with another H323 call: phone1 dials into asterisk with H323, for extension 111 in asterisk: exten => 111, 1, Dial(chan_h323, H323/111@phone2) (in my extensions.conf the syntax is good ... this is no). I can see how the first call is partially processed, then the

I am using Nu Fone Network's h323 drivers. I can place H323 calls using following in extensions.conf file, exten => _1732.,1,Dial(H323/${EXTEN}@192.168.1.2) If I need to use h323.conf to do the same I cannot configure h323 to do the same. I get everyone is busy message and I do not see IP packets being generated by * trying to communicate to 192.168.1.2. Can someone point out what I

Hi, I have about one year of experience with Asterisk, working with ZAP (digium, junghanns) ZAPHFC, SIP and IAX. These technologies are quite clear to me, the problem is that I have no experience with H323, but now, I need to use this also. The problem that I have is very trivial, so I think that this should be a very easy question for you guys whom know how it works. All I want to do,

Dear All. I have installed Asterisk-1.0.6 on FreeBSD-5.4 RELEASE via port, so the chan_h323.so modules already included. When i try the SIP channel, asterisk works fine. In this case, i use the XLite softphone as client, i can hear the voice transfered through clearly. Asterisk is good!! :D The problem is when i try the H323 channel, the voice cannot be transferred through. I have

I try to get H323 to run, but have so far only partial success: There is a Gatekeeper GK, where asterisk connects to. The Gatekeeper sees Asterisk, and Asterisk sees the gatekeeper. From the Network on the GK, asterisk is reachable via the number 070333333. I have an extension on asterisk 6002, which is reachable. I try to call a number attached to the gatekeeper (070168177) with the

Driver chan_h323.so ---- If extension is exten => 0119823,1,dial(h323/0119823@10.10.10.1) then dial is OK: Executing Dial("SCCP/goran-00000002", "h323/0119823@10.10.10.1") in new stack ---- But if extension are something like: exten => _011xxxx,1,dial(h323/10.10.10.1/${exten:3}) exten => _011xxxx,1,dial(h323/${exten:3}@10.10.10.1) exten =>

FC2 Asterisk 1.0 When I dial a H323 dialup to an existing OKI Voip Router (BV1250), I get an EndedByRefusal yet the OKI Gateway is setup with the corrent reply ip addresses etc etc, unfortunately its an existing multiple voip router setup with g723.1 and g729a, so changing the codec on the router maybe an issue. I have compile in the h323 as per the channels/h323 setup with the listed libraries.

Dears; Now using Asterisk H323 (which coming with Asterisk, I just compiled PWLIB and OPENH323), now I am placing a call from the IP Phone, the call comes to Asterisk, and it goes to the default context, but did not hear any voice of the played wave file. 1) Why Asterisk accepted the call without authentication? At least, it should be added to the h323.conf. 2) In case we found the method to