similar to: UTStarCom F1000 SIP configuration

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

I bought a UTStarcom F1000 WiFi IP Phone from http://www.luxoncomm.com and tested it with Asterisk. This is a my first impression of the device. The F1000 supports SIP. It looks and operates like a cell phone, and connects to the Internet through WiFi, so you can use it at any WiFi hotspot. I set up a 802.11b wi-fi network with a Linksys BEFW11S4 Wireless-B broadband router with no security

Hi there, I am trying desperatly to register my WiFi Phone UTStarcomm F1000 with my asterisk server. I already changed the name of the user to "anonymous" since it looks like the phone sends that name. The WiFi Phone's IP is 192.168.1.217, the asterisk server's IP is 192.168.1.200 What is it that I am missing? Any help very much appreciated!!! The error message I get is: Jan

Hi all, I' m currently testing a Wifi UT Starcom F1000 and for my taste even with the audio volume level even on max. setting, the speaker is not loud enogh. Is there a way to raise the audio-level specifically for a concrete SIP device via a sip.conf setting or something like that ?? TIA, Bruno

Can anybody help me on configuring utstarcom F1000 on asterisk? Is there a way to do it or is it impossible? ___________________________________________________________________________ Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o

I have 8 - F1000G utstar phones. on a couple of them I can configure them by the WEB interface with no problem. On a couple of the them I cannot. I get no response when I point the browser to them. THe units work. keypad is fine. I can examine the network values - specifically the DHCP address. etc... Just cant get the web interface to do anything. Has anyone had this issue and know how to

Hi, after upgrading to 3.10.9 I'm seing ganesha.nfsd segfaulting all the time: [12407.918249] ganesha.nfsd[38104]: segfault at 0 ip 00007f872425fb00 sp 00007f867cefe5d0 error 4 in libglusterfs.so.0.0.1[7f8724223000+f1000] [12693.119259] ganesha.nfsd[3610]: segfault at 0 ip 00007f716d8f5b00 sp 00007f71367e15d0 error 4 in libglusterfs.so.0.0.1[7f716d8b9000+f1000] [14531.582667]

Hi Frank, It will be very easy to debug if u have core file with u. It looks like crash is coming from gfapi stack. If there is core file can u please share bt of the core file. Regards, Jiffin On Thursday 18 January 2018 11:18 PM, Frank Wall wrote: > Hi, > > after upgrading to 3.10.9 I'm seing ganesha.nfsd segfaulting all the time: > > [12407.918249] ganesha.nfsd[38104]:

Does anybody use UTStarcom F1000G Wi-FI VoIP phone? http://www.utstar.com/Solutions/Handsets/WiFi/ I'm planning to buy one and I need to know did you have any problems with phone. What is the sound quality? How close you need to be to the access point? Please, any information's are useful to me. -- Tomislav Parcina tparcina#lama.hr

We are a venture funded start-up that is looking to develop a 4 person Agile Ruby on Rail Development Team. We are working with ******* to develop our software right now and are looking to build out our own team of 4 developers within the next few months. We are building enterprise class software to help F1000 companies build environmental sustainability into their culture. The basic function of

Hello All, I am trying to setup a three way replicated Gluster Storage which is exported by NFS Ganesha. This 3 node Ganesha cluster is managed by pacemaker and corosync. I want to use this cluster as a backend for several different web-based applications as well as storage for mailboxes. The cluster is working well but after triggering the failover by stopping the ganesha service on one node,

I'm about to start working with WiFi phones on my Asterisk installations. Can anyone tell me if they are using WiFi phones on wireless network that is extended with WDS and how well the phone handles jumping from access point to access point while on a call? Do any WiFi phones support WPA encryption or are they all still under the impression they are only being used on public hot spots?

Hello list, I was going to buy this weekend a Wisip from http://www.pulverinnovations.com/, but jeff got out of stock and he wont have Wisip for the next 3 to 4 weeks. So I start searching for other wifi phones because I was really upset about it and I found IPC5000 from http://www.fahdtel.com/sip_phones.htm, I liked so much the pic that I email the guy and he send me the PDF with all the details

All, has anyone any experience in using Wifi smartphones as SIP clients? Does this work properly? What models/brands are optimal for this (in terms of ease of use, battery life etc)? Thx!! B.

Hi i have a debian box working as a router.. it works quite well, now i want to give more than 1 ip.. is it possible to do it? some of them must be an open ip.. i mean.. all ports opened is it possible? how should i do it? Here is my nat.sh script just in case someone wants it.. (comments r in spanish.. and not right) Thanks in advance, #!/bin/sh echo "AthoS LaN Generando

We're getting our feet more and more wet with VOIP at work. We want to experiment with a good wireless (as in WiFi) phone. What would be a good phone to impress my boss with? I'm personally drooling over the UTStarcom F3000, but compatibility and shipping ETA info is a bit sketchy. Phil

If you are running Lollipop / Android 5.x on your Nexus 5, then you are probably seeing the same issue I was with it. lollipop seems to change networking quite a bit in that it's using iptables / and `ip rule list` extensively for per-user settings. I think http://www.linux.org/threads/debugging-nat-prerouting-issues-iptables.7136/ is relevant if you see running in to the same issue, it's

SELinux is considered as the biggest problem. On Thu, Mar 26, 2015, 22:37 Andrea Squeri <andrea.squeri at gmail.com> wrote: > Yes. The problem is lollipop. I tried to install tinc on my brother's > device which mount a cyano 10.1( android 4.2.2) and it works. > I don't understand which is the problem with lollipop. Is there a > firewall that block the packets? >

On 2/21/2020 9:18 PM, Andrew Bartlett via samba wrote: > On Fri, 2020-02-21 at 20:48 -0500, TomK wrote: >> >> >>> >>> "Sadly this really appears to be is a client issue. You see there the >>> string Samba gets, so by the time Samba tries the process it the @ is >>> already interpreted and the string split. >>> >>> Sorry!

I think it's more of a routing issue than anything explicitly blocking it, they use a new 'ip rule list' and per user settings that aren't well documented yet either, but where exactly to point I don't know. I haven't messed with android 5 much yet, it seems not ready enough yet for daily use, there isn't a single snapshot in the cyanogenmod repos, for example. So maybe