similar to: Distinctive Ring for Agents (Was: Re: Asterisk 1.0.8)

I've done the unspeakable. I took a working setup of 1.0.5 and upgraded with the latest cvs. with 1.0.5 distinctive ring worked great. with the latest cvs, it doesn't seem to work with my sipura 2000 (the only thing i have to test it with). I can see in console that its sending the info, but its not working? i realize the likely hood is I messed something up somehow during checkout or

Hi Can anyone with distinctive ring on their 7960's possibly post how they've got it to work? I understand that the ALERT_INFO variable is involved but using the examples for the variable value from the WiKi I'm just getting an error message from the Asterisk concole. Thanks in advance. P

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Hi, I'm using asterisk 1.2.1 on a debian sarge distro. I've followed notes in http://www.voip-info.org/wiki/view/Polycom+auto-answer+config and http://www.voip-info.org/wiki/index.php?page=OptiPoint+600+SIP+-+Distictive+ring+using+ALERT_INFO but I still cannot change ring style via asterisk using exten => 666,1,SipAddHeader(ALERT_INFO="ring3") in extensions.conf . Is it

Does anyone know of a way to setup distinctive ring in * for a Grandstream BT 101? I'm attempting to setup a way for users to distinguish between external and internal calls. I've tried ALERT_INFO with no success. Thanks, Mason Herring Director of Engineering Delta Signal, LLC -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

Hello List, So I have a few MiTel 5224 IP phones running in SIP mode. Per the phones documentation they honor SIP distinctive ring tones. I am able to send the correct ALERT_INFO message in an invite from Asterisk to the phone, but I don't know what ring tone to call. From the reading I've done the syntax is: [3155791234] exten => s,1,Set(_ALERT_INFO=Ring 8) exten =>

I am wondering if there are any tricks getting the Cisco ATAs to do "distinctive rings" via the ALERT_INFO variable? I have seen some contradictory information in the Wiki, and I tried the example there. I then sniffed the connection between the server and the ATA and didn't see the header sent like it is "supposed" to be. If someone out there has a handle on this and

I posted this 1.2.0-beta1 success story to asterisk-dev, and someone recommended that asterisk-users might benefit from it as well. Thanks, Alan Ferrency pair Networks, Inc. alan@pair.com ---------- Forwarded message ---------- Date: Thu, 22 Sep 2005 17:35:08 -0400 (EDT) Subject: [Asterisk-Dev] Re: Ring requested on channel already in use To: asterisk-dev@lists.digium.com > alan wrote:

Hello, I've got my dialplan configured to do a double ring when a customer service call comes in, and a normal ring when an extension is dialed directly. When a customer service call is transferred, I want to ring to revert back to normal. In the local extension macro, I have the following ; make sure ring is set to default exten => s,n,NoOp(${ALERT_INFO}) exten =>

Hi, I have 1.2.9.1 installed. It always rings first available agents for 15 seconds, then rings and hangs up the next agents straight away, then ring the next agents for 15 seconds. It goes as a loop. Any one has the following same problem? Thanks. Agents.conf [general] persistentagents=yes [agents] autologoff=60 wrapuptime=15000 ackcall=no group=1 agent => 7130,7130,agent1 agent =>

I am trying to get distinctive ringing going again with these phones, depending on the outside line the call comes in on. I had a working 1.0.x Asterisk setup using: SetVar(ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) Which used the short quick rings. In Asterisk 1.4, I have tried several things, but I think the correct syntax is: Set(_ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) But

sorry, was only for users list... Hi Kevin, Hi list, you are right, acting now is not needed, when callbacklogin will be removed anywhere in future... But thinking how to realice alternatives can't be so wrong. Callbacklogin gives a very simple way to use more queues for one agent, which only has to logon to only one system. No need to make dbs or tables for saving, where the agent has to be

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

I am trying to have the ring types different for internal and external incoming calls. I have followed the guide on the wiki, the SetVar executes, in extensions.conf I have it as s,1, Yet it doesn't work? When the phone rings, the ring type is the one I chose on the phone, it rings same tone for both when I test. Using Asterisk Stable. Anyone got this working and can

I use the following macro for my extensions. It only works with Zap channels and assumes that any Caller*ID number that is 4 digits is an internal call and all other calls are external calls. Use like this: exten => 1234,1,Macro(std-exten,Zap/4,20) [macro-std-exten] ; ; Caller*ID is 4 digits (internal call) ; exten => s/_XXXX,1,Dial(${ARG1}r2,${ARG2}) exten =>

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"

Hi all, Have been experimenting with agents and queues instead of placing calls direct to a user's phone extension, but I've run into problems with calls to both the agent and the extension which creates a zombie and double records calls abandoned etc. We're using a unique queue for each agent (only a handful of users) to try and get some agent/queue information to see what the

Anyone having any problems with CVS-HEAD-12/24/04-15:59:15 and ALERT_INFO I have a system setup with polycom phones configured to auto answer on internal calls. When we upgraded to the latest CVS the auto answer stopped working. My dialplan has not changed. I did a sip debug and I dont see the alert-info tag in any of the sip traces. Any help would be appreciated. Thanks John Bittner Simlab.net