similar to: Zap POTS Line Problem calling outbound

I just set up a Polycom 500 on *. Every few calls I make, the call connects and the receiving party can hear me (thru Broadvoice), but I still get ringing on my end, as if they never picked up. * logs look just fine. Does any one have any suggestions? Thanks. ________________________________ Adam S. Robins Executive Vice President & CIO PHARMACENTRA, LLP 5901B Peachtree Dunwoody

Could someone please direct me (via personal email) to a provider with good prices on Polycom Soundpoint IP 500's with POE cables? I need 14 of them. Thanks, Adam ________________________________ Adam S. Robins Executive Vice President & CIO PHARMACENTRA, LLP 5901B Peachtree Dunwoody Road, Suite 380 Atlanta, GA 30328 Office: 770-395-0088 x34 Fax: 770-395-0989 Mobile:

Here's our config: cisco 7960's running 6.3 sip code latest cvs of * t100p zaptel card adit 600 channel bank 7 pots lines and 2 fax machines on the adit 600 dialing out from the cisco phones gets sent out via the zap channels, but I'm having some serious echo problems. I currently have the adit set to +3 rxgain and -6 txgain, with my zapata.conf containing: echocancel=128

I'm trying to compile the voicemail module with mysql support and I get this error on the chan_zap module . Does anyone have any idea's on this one.. chan_zap.c: In function `handle_init_event': chan_zap.c:5668: error: `ZT_EVENT_POLARITY' undeclared (first use in this function) chan_zap.c:5668: error: (Each undeclared identifier is reported only once chan_zap.c:5668: error: for

Hi all, I've been trying to wrap my mind around this one for several days now. How can I 'debug' the CallerID reception on a Zap/POTS channel? I have a POTS line with CallerID and a Digium TDM11B card right now. I have my signalling set to ks for both sides, can make and receive calls just fine. But I never get CallerID on incoming calls. I get the following messages: Aug 11

Is anyone else having problems with them? Until today everything was working fine. But now dtmf is not working on incoming calls. Any ideas? I tried calling them and their voicemail is not accepting answers. Is there another source for DIDs in the 314 or 636 area codes? Especially a company that supports something besides ulaw. I am going to hate switching numbers again, my wife is

I'm having trouble getting outbound calls going with aah 1.3 and a tdm400p w/ 4 FXO. Incoming calls work fine, outbound I get this: -- Executing SetVar("SIP/231-af2b", "OUTNUM=6643955") in new stack -- Executing Cut("SIP/231-af2b", "custom=OUT_1|:|1") in new stack -- Executing GotoIf("SIP/231-af2b", "0?19") in new stack

Hi, I'm using the macro below in extensions.conf for most of my outbound calls. One issue with my current configuration is that when I make an outbound call it doesn't properly detect that my PSTN line (Zap/1) is busy with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY. The debug output is below. My desired

I am attempting to update my Asterisk installation from 1.0 to the latest stable version. When I use CVS checkout, I am receiving the following messages on chan_sip.c: RCS file: /usr/cvsroot/asterisk/channels/chan_sip.c,v retrieving revision 1.510.2.25 retrieving revision 1.510.2.27 Merging differences between 1.510.2.25 and 1.510.2.27 into chan_sip.c M asterisk/channels/chan_sip.c Then, when

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some

We have 4 analog line and 2 analog trunks. On the trunks we have all the DIDs coming into the current phone system. Trying to get everything moved over to Asterisk but having issues picking up the calls on the analog trunk. We can receive calls on the plain analog lines and we can call out on all analog lines and analog trunks. When a call comes in on the trunk line the ZAP channels don't

I have a real head scratcher . . . We have several employees who work from home. All have Polycom 501's that register to our office Asterisk 1.6.x server and communicate using SIP g729a. About two weeks ago, one of these remote users starting experiencing a problem with a previously working phone: a. She could receive inbound calls, b. She can place outbound calls to internal extensions c.

Hi everyone, Sometimes i am having problems with Zap channels on asterisk 1.2 (Disc-OS 1.1), after some calls, the channel continues in use, even after hanging the call up, then i need to run the "soft hangup Zap/<zapchannel>" in the asterisk CLI to release the channel. Here is my zapata.conf: [trunkgroups] [channels] language=pt_BR context=default usecallerid=yes

I'm trying to set up asterisk so any phone connected to channel 1-16 of my Adit600 channel bank can pick up a call coming in on channel 24. I do not wish to ring any of the 16 channels on an incoming call -- this is strictly so I can pick up the line if I see it ringing and wish to answer at work. I have channel 24 in call group 3, and channels 1-16 in pickup groups 1 and 3. However

Greetings list- I have a box with a single FXO card in it. I'm able to dial out ZAP/1 with no problems and as expected. However, I would like inbound calls on that POTS line to go unanswered by Asterisk since I have other equipment on the line. I've setup zapata.conf for the channel without a context but the line is still answered. I've also setup a blank context with the same result.

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried

Can anyone out there please tell me what ports Speex uses? I want to set up QoS on switches but I can't seem to find this information anywhere. The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended

Hello, We just had some new T1s turned up today to replace others that our contract has run out on and we are now getting more echo on the new T1 lines than we had on the old ones. The T1 type is 24-channel, D4/AMI SF Robbed-bit(the same as the T1s they replaced) The problem is that we are getting echo on about 10% of the calls in and out placed on these new T1s compared to less than 1% with

Hello, I've got very annoying behaviour from our asterisk PBX. We have 12 channels T1 e&m wink start for TDM and using iax softphones internally (iaxcomm, but tried firefly-thirdparty and discarded for bad sound quality). Slackware 9.1 w/ kernel 2.4.26+ digium TE110P card. In some cases when call is placed from softphone to TDM, system does not detect call answered on Zap channel and

Hello, I'm fairly new to asterisk and Trixbox, I'm setting up a Trixbox based email to fax gateway. At this time, I have a ZAP PRI link between the eFax server and my VoIPSwitch. The ZAP channels are configured, the B and D channels are up, and I have green link lights on either end of my cabling, but when I dial the number I have assigned to my eFax server, the call never seems to route