similar to: Miax: Digital voice channel when connecting to asterisk

Hi all, I have a TC35 and am keen to see if anyone has both voice and sms working from Asterisk through this device? Google tells me that a few people have theorised about it, I can't find anyone claiming to be doing it. What would be the best way to put it into practice? Build a new channel for it? Thanks Andrew

On Tue, 28 May 2019, nicolae788 wrote: > Apc uses a propietary serial cable and your convertar for sure it's wired > standard. Refer to the following link for info. > https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml > > Good luck > > On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > >> a friend gave me an old apc smart-ups 1250

On 5/28/19 3:39 PM, Julian H. Stacey wrote: > grumpy at mailfence.com wrote: >> a friend gave me an old apc smart-ups 1250 >> it has a rs232 interface but i have no pc with a rs232 port >> i attempted to use a rs232 to usb adapter but the ups goes nuts >> i connected the ups to batteries and verified it was working properly >> when i plug the usb cable into the pc

Hi, Reference: > From: Manuel Wolfshant <wolfy at nobugconsulting.ro> > Date: Tue, 28 May 2019 16:42:21 +0300 Manuel Wolfshant wrote: > On 5/28/19 3:39 PM, Julian H. Stacey wrote: > > grumpy at mailfence.com wrote: > >> a friend gave me an old apc smart-ups 1250 > >> it has a rs232 interface but i have no pc with a rs232 port > >> i attempted to

Suggestions? ----- Forwarded Message ---- From: James Tucker <jt at ra66i.co.uk> To: djberg96 at yahoo.com Sent: Thursday, October 19, 2006 7:28:30 AM Subject: Win32 OVERLAPPING IO Hi Daniel, My name is James Tucker, I''ve been hacking in Ruby for only a few months now, however am an experienced general programmer in a wide variety of languages. My current focus is on a new

grumpy at mailfence.com wrote: > a friend gave me an old apc smart-ups 1250 > it has a rs232 interface but i have no pc with a rs232 port > i attempted to use a rs232 to usb adapter but the ups goes nuts > i connected the ups to batteries and verified it was working properly > when i plug the usb cable into the pc the ups shuts down > when i attempt to turn it on it beeps twice

Apc uses a propietary serial cable and your convertar for sure it's wired standard. Refer to the following link for info. https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml Good luck On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > a friend gave me an old apc smart-ups 1250 > it has a rs232 interface but i have no pc with a rs232 port > i attempted to use

Hi all I was wondering if one of you kind gentlemen (or ladies) would assist me in finding the data string required to tell my ups to turn on and off. No more no less :) I guess it would be the actual string of an instant command sent down the rs232 port to the ups. I have no programming experience and have done a list search to no avail. Sorry to trouble you with this. I have a lan to

Hi Mark Did you or anyone else ever find a satisfactory solution to this? Are there any phones which provide voice through the serial connection? What about the nokia card phone - does it have open source drivers? Cheers Rob On Sat, Jul 13, 2002 at 10:31:53AM -0500, Mark Spencer wrote: > Does anyone (maybe in Europe) know how I could build a GSM compatible > channel for Asterisk, so

Hello guys. I am new in mac world and in wine apps. I have this singular situation: I have a macbook with wine and winebottler installed. I want to use this exe app: azloader.exe. Ok, wine is able to load it normally. But... the problem is, my macbook has not the RS-232 port. So I bought a RS-232 to USB adapter. I've installed the correct "drive" to use that. I've tried that in

Hello Does anybody know if it's possible to monitor a Powercom EBk 500 (RS232)? the trick is that I am using a raspberry pi, it does not have RS232 so I connected a keyspan RS232 to USB adapter, but so far I can?t make this work. Thanks for your time to read this. -Edgar -------------- next part -------------- An HTML attachment was scrubbed... URL:

a friend gave me an old apc smart-ups 1250 it has a rs232 interface but i have no pc with a rs232 port i attempted to use a rs232 to usb adapter but the ups goes nuts i connected the ups to batteries and verified it was working properly when i plug the usb cable into the pc the ups shuts down when i attempt to turn it on it beeps twice and shuts down this all occurs before i start the nut software

Hi there Does any one of you know something about R and an implemented RS232-Interface? Are there any packages? Or is it possible to write an extensions or something like that in C/C++ ? The problem is that i should handle the information from a measuring device via the RS232-Interface (probably you know LabVIEW, which provides this functionality). These informations should then directly be

I installed Board Master a software that control a CNC machine to produce PCB (Printed Circuit Board). The software install flawlessly but to check if it works I need RS232 working to control CNC machine. I tried to set connection parameters in Board Master choosing COM1 (the only available) but CNC machine don't move and software keep asking for switching machine on. Of course software and

Hello all. This is a question that I should be able to answer, but the old grey cells aren't working. My Google-Fu must not be up to snuff, either. I have a MOXA IP-RS232 converter that I'm going to be using over an RF WAN and I need to confirm the actual data rate that I'll be able to achieve. I have the drivers loaded (/dev/ttyr00) and a loopback plug on the end of the device. I

Hello list, I'm trying to reuse a fairly old PC based embedded system. It has no video output at all, no VGA, nothing older, and no keyboard / mouse connectors. The console is on a standard RS232 interface, including BIOS output and the minimal BIOS loader. The BIOS emulates / redirects text output to and keyboard input from the console RS232 interface, but unfortunately, this emulation

Hello list! I can't seem to get this running via RS232 monitoring; I've been told that NUT won't support serial connections, and find this hard to verify. Does anyone else have this running on the SU10KRT3U via RS232? If so, what driver did you use? I'm getting no satisfaction from the "tripplite" driver; upon upsdrvctl start, I get "Failed to find UPS - giving

Hi Pawel, 2011/7/26 Pawel Sikora <pluto at agmk.net> > Hi, > > i have an orvaldi ups > http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 > and it works fine with blazer_usb driver. could you please add a new udev > rule? > > # ORVALDI 750/900SP - blazer_usb > ATTR{idVendor}=="0665", ATTR{idProduct}=="5161",

Hi Pawel, 2011/7/26 Pawel Sikora <pluto at agmk.net> > On Tuesday 26 of July 2011 14:33:15 you wrote: > > Hi Pawel, > > > > 2011/7/26 Pawel Sikora <pluto at agmk.net> > > > > > Hi, > > > > > > i have an orvaldi ups > > > http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 > > > and it works

On Jul 20, 2016, at 6:12 PM, Edgar Estrada <edgar.estrada at gmail.com> wrote: > Does anybody know if it's possible to monitor a Powercom EBk 500 (RS232)? the trick is that I am using a raspberry pi, it does not have RS232 so I connected a keyspan RS232 to USB adapter, but so far I can?t make this work. That model isn't listed in our compatibility table: