similar to: meetme - conf-invalid

Yes, I am a newbie too. I am having a problem with meetme. From what I have seen it will work without a Digium card but with audio problems. My goal is just to see how it works not the quality of the audio. When I dial into the conference room the following message is played: "That is not a valid conference number." On the console I get: "unable to open pseudo channel". As

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, As I understand it, IAX2 trunking requires zaptel timing. Zaptel timing is provided by Zaptel cards, ztdummy or ztrtc. ztdummy requires usb-uhci and ztrtc can't run on smp systems. So if you only have smp systems with ohci and no zaptel cards (because it's a sip/iax2 gateway) then you're screwed? - -- Regards, Tais M. Hansen

I installed SUSE LINUX Enterprise Server 9 that uses a Linux 2.6.5 kernel. When I installed the OS, I chose a minimal package install. I compiled the latest asterisk out of CVS. So far things have gone OK. I can establish phone calls (SIP, TDM, etc) and the quality is good. Only problem is that I can get no sound out of Asterisk itself: prompts, comedian mail prompts, etc. I can see messages on

I have successfully installed and configured the asterisk, the incoming and the outgoing calls are working fine, its a tremendous solution :) Now i want to enable trunking between two asterisk boxes, in the iax.conf i have put: [karachi] ... ... ... trunk=yes ... ... ... everything seems to work fine but when i load asterisk it says: -------------- Feb 17 10:59:14 WARNING[18726]:

Hello All, Can someone please tell me about Zaptel? Is it only needed if you are going to have an interface card like TDM400P installed on the Asterisk server? Do you really need it if you do not have the interface card? Thanks, Lonnie

Hi, we are setting a 120-channel conference server and would like to learn if someone already did this (hardware, problems, etc...) Best regards, PauloHM

We have an old Telrad 128KSU PBX to which I am trying to connect asterisk in the following manner: Current Setup: Telco-> T1->PBX Desired Setup: Telco-> T1-> Asterisk-> T1-> PBX. I am first trying to setup the Asterisk -> T1->PBX part without disturbing existing setup so I can get asterisk to forward calls to PBX and once that is done, I would try to move the telco

Hi. I just started trying to play with Sphinx. I followed their site as far as running sphinx-server. It is listening on the default port. I copied sphinx2-simple to another file and changed sphinx2-continuous to sphinx2-server. So, I ran eagi-sphinx-test under asterisk. What exactly is it supposted to do? Here's what I get: debian:~# sphinx2-simple2 sphinx2-simple: Demo CMU Sphinx2

Dear LLVM Developers, The LLVM website, CVS repository, and SAFECode website should now be back online. Should you encounter any problems with the LLVM services, please send email to llvmdev at cs.uiuc.edu so that we may fix it. Regards, John T. Criswell ********************************************************************* * John T. Criswell Email: criswell at uiuc.edu

Hi, I've install zaptel and I don't have a Digium card installed in the machine. So I want to install ztdummy to have Music On Hold working. I've follow these instruction http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and at the point "modprobe ztdummy" it's failing. I'm getting these messages: root@dubic:~# modprobe ztdummy FATAL: Error inserting ztdummy

Hi all, Trying to build ztdummy on an old redhat 7.3 box running kernel 2.4.20-43.7.legacysmp. Yes, I have the kernel sources installed. Yes, I set them up with make oldconfig; make dep. The build error is: make ztdummy gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/

Hi all, I hope everyone is doing well. I just joined the list, and I've really enjoyed all I have read about asterisk so far. Unfortunately, I'm having a bit of trouble implementing this thing :). By the way ... I did my best to search the forums, and also to use google extensively, and while I have found pages with people with the same problem, ... The fix suggested on those sites,

Hi Everyone, I read through the list on the issues with the ztdummy driver which I need for MeetMe, but I seem to have come across a problem that I cannot seem to find an answer for. I am running Gentoo 2.6.10 on an Intel box. I have read the the wiki entries on the ztdummy and followed the instructions as they relate to the 2.6 kernel. Everything compiled great, but a modprobe ztdummy

Has anyone received this message while attempting to do a MAKE INSTALL on ZAPTEL depmod: *** Unresolved symbols in /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o I am not running DEVFS so that's not the issue. Zaptel drivers/modules all load, but ztdummy won't /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o: /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o: unresolved

Hi, It looks like the CVS server is still not available. When I try to update with cvs, I get: cvs [update aborted]: connect to llvm-cvs.cs.uiuc.edu(128.174.245.58):2401 failed: Connection refused I know the server was down earlier this week but according to the message below, its supposted to be restored by now. Could someone please help? Thanks, Reid. On Wed, 2004-01-07 at 14:30, John T.

Hi All, I was able to insert some extensions in Mysql DB and use them successfully. In Mysql extensions table the priority column is of type tinyint and when I give 's' value for it, it is not accepting that value as it takes only tinyints. Please tell how can I make that column accept values like t,s,i and make it work with asterisk in realtime without any problem? If I change the type

Hi, I'm trying to setup a small BRI ISDN <-> voip gateway. The ISDN card is based on Cologne chipset, so I try set it up with zaphfc. The versions i'm running: kernel-2.4.27 Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e zaptel modules 1.0.7 zaphfc is from bristuff-0.2.0-RC8e When I'm doing the insmod on zaptel, zaphfc, zaprtc: Zapata Telephony Interface Registered on major 196 PCI:

Hi! When I try to load the ztdummy driver via "insmod ztdummy", I get the following errors: /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_register I'm using zaptel-1.0.8 and

Hi there, anyone has a suggestion about what do I need to do to solve this? Any comments appreciated. Philipp [root@asterisk]# modprobe ztdummy /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_output_wakeup_Rd2dbbfe0 /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_input_error_Rd2ca1e76 /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_unregister_channel_Rb8cf9a74

Hello System: Debian etch with kernel 2.6.18-4-686 or 2.6.18 custom. Asterisk Version: SVN-branch-1.4-r55483M Zaptel Version: SVN-branch-1.4-r2302 modules all ok in compilation time. And modules loaded: ztdummy 5928 0 rtc 13364 1 ztdummy zaptel 181540 1 ztdummy crc_ccitt 3200 1 zaptel In /dev/zap directory I have: