similar to: echo cancellation on an iax2 channel

[This email is either empty or too large to be displayed at this time]

Hi We've recently set up and are using with success 1.0.7 using a Junghanns quadbri card to BRI ISDN, and Firefly with IAX2 protocol as softphones Works very well, however we're getting cases where sometimes the call just drops. >From setting more verbose modes we get a log which is shown below. The problem seems to be the maxretries message which comes from chan_iax2. We are using

Using Firefly 1.9.5 (thirdparty) on Win2k Using Asterisk CVS HEAD 20041117 (also tried with 20040806 and 200410-something) IAX2, no NAT. Firefly->Asterisk audio works, but I can't hear anything from the other side. Using GSM codec, also tried ulaw. Any ideas? -A. relevant bits of iax.conf: [andrew-bt] type=peer host=dynamic trunk=no [andrew-bt] type=user context=fxs secret=12345

Hi all, We have just installed a * server (CVS head) with a TE110P card and a IDSN20 line, we are using the GXP-2000 handsets running the latest firmware (.9). Some of the calls we are receiving have echo at the our end (we can hear ourselves speak). We have a traditional ISDN telephone system here as well and when I make a call from one of the handsets asterisk answers, directs the call to

Hi List; I am using Firefly softphone Version 1.9.9 Build 4521 and I select IAX protocol and did the configuration in Network1 (and I checked the Active checkbox) as following: Server: 192.168.8.4 username: iax2user1 password: password In the Asterisk, I did the following configuration on the /etc/asterisk/iax.conf: [iax2user1] type=friend context=internal username=iax2user1 secret=password

> -----Original Message----- > From: Eric Wieling [mailto:eric@fnords.org] > Sent: Friday, March 11, 2005 1:52 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Re: Incoming echo cancel > > > Nenad Radosavljevic wrote: > {clip} > > > > Anyone have an idea, why this type of echo happens ? As far as I have

I am using a SIP softphone (X-lite, SIPPS or Firefly) connected to an Asterisk v 1.0.3 PBX. The PBX is also connected via a ISDN-PRI crossover cable to a Avaya Definity Generic 3 PBX via a TE405P card. All outside of the office calls go through the Definity. Here's the issue: Calls to internal SIP extensions, Definity extensions, other offices within our private network (through the

Hello, I am having horrible echo problems when using the FireFly client on both the caller and callee sides of the call. When I use another IAX soft client like IAXcomm or IAXPhone I do not have the same echo problems. Has anyone else experienced this and do you know what might be the problem? Thanks, dj -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am running Redhat RHEL 4, authentification is via kerberos against and AD server, usernames are supplied via ldap service running on another redhat box - winbind has been seg faulting repeating when accessing samba - always the same error message... see logs below - can anyone tell me whats going on? Mar 14 16:12:45 firefly winbindd[14752]: [2008/03/14 16:12:45, 0]

Hi all, i have a problem with 2 peers conecting to an asterisk machine, both are conected behind nat without any port mapping in the router, and the * is conected behind other nat with the port 4569 mapped to it address, the problem is: when a peer register to the asterisk the other cant register and viceversa, only gets registration the first one, im using firefly and a hardphone from wuchuan,

I've been going nuts lately trying to get rid of an annoying echo problem that makes my asterisk server unusable when clients try to call me. Here's the breakdown of the issue - Hoping that someone can throw me a clue: My setup is as such: Single AMD Athon machine with X100P clone card and voip through multiple providers . * Inbound calls through the X100P that do not bridge to

Hi, i have a problem with iax2 and ringtone. Here is the call path pstn -> asterisk -> iax -> firefly or any iax phone. My problem is when i receive a call on my iax phone, the ring sound is very distort and bad. If i open my sip phone, and receive a call from my pstn, the ring is like dring dring, very normal. Otherwise, it is like a machine gun with iax Help would be really

Hi, On Tue, Aug 24, 2004 at 10:44:49AM -0700, Shana Cooke (Gitnick) wrote: > The result has my husband speaking clearly, but the echo of myself > talking is garbled and sounds like the Borg Hive from Star Trek. It's > more distracting than the original signal was. I have tried introducing > delays to my echo, but it does not help the signal to become clearer. Try this patch. It

G'Day, I have a bit of FireFly problem that hopefully someone has seen before. What happens is if I make to or receive a call from the FireFly network the call will connect successfully. However, around 10 seconds after I answer the call I am disconnected. The weird thing is same thing happens if I make a call. I've had a look at the * console and I can't see that my * PBX drops

Using TDM400's here and I have tried everything to cure the echo. I have used the Milliwatt test from the telco and from asterisk to tune RX/TX gain via a patched ztmonitor. What happens is I experience midcall echo. I turned on aggressive_suppressor and it seems to do great. The problem happens with misc. noise around the office will cause it to mute the other end of a phone call while

Okay, I've read as much as I can, and I think i've followed instructions, but I'm still having problems with * and firefly... I can get outgoing to other freshtel working, but not incoming (I get the "not available" voicemail), or outgoing to landline. I'm using the debian asterisk package (0.9.1-RC1-4) My iax.conf has in general (under my FWD register, which

Hi there I am using IAX2 softphones dialing into a meetme conference. In my softphone I was forcing uses to click on a button when they wanted to speak, enabling their microphone and disabling their speakers. This way when a user was speaking they did not hear their voice half a second later (because meetme mixes the voice and sends to everyone in the conference). Now because of requirements

Hey list (again - annoying bastard I am) I've played with Firefly/* for a while and I have yet to find a way to have * send voicemail notification to Firefly. It appears possible using SIP (no clue whether Firefly supports it) in the sip.conf file, but there's no mention of anything voicemail-related in the IAX.conf file. I'm using IAX with Firefly, so that might just be the

Hello All, I have been looking for a commercial version of an IAX2 Softphone for Windows but the ones I have came across (i.e. Iaxcomm, Iaxphone, Diax) do not seem to have an updated version since April 2004 in some cases. We looked at Firefly but we sent emails to Virbiage/Freshtel with questions and could never get a response from them. Has anyone got any recommendations for commercial

I have an asterisk server up and running, using Firefly in IAX mode works great, even with Firefly behind a NAT (as expected, since IAX works really well with NAT). Now I'm trying to get X-Lite and/or Firefly to work in SIP mode from behind the NAT, and I can't seem to get there. At this point, the phone will successfully register with Asterisk, and the Asterisk qualify messages get