similar to: Re: Asterisk-Users Digest, Vol 11, Issue 100

Jon, thanks for your help, but I'd rather not do it using agents and queues, ideally what would happen is it would simply play the message and wait for the person to press a button, if nothing is pressed, it just keeps going down the list. Any other suggestions? asterisk-users-request@lists.digium.com wrote: > Date: Wed, 15 Jun 2005 00:53:14 -0500 > From: Jon Gabrielson

Hi All, I have registered "abhijit" for SIP in asterisk Server. I am able to register my softphone (SJPhone) to the server using the name "abhijit". But whenever I try to make any calls I am gettinh the following error message:- *CLI> -- Registered SIP 'abhijit' at 172.20.28.85 port 5060 expires 120 May 26 07:34:52 NOTICE[2761]: pbx.c:1738 pbx_extension_helper:

Andi - I have experienced the same issue you mention and gotten no reply as to a way to fix it. I finally implemented "blacklist" into my Asterisk and added "Anonymous", "anonymous", "unknown", "Unknown", etc., into my blacklist file. When those come in with an IP address instead of a phone number but have no real name, they get the

I have an X100P clone hocked up to an analog line of my PRI. I can use it to dial out. but when I call the extension it answers and says "GOODBY" I have a Livevoip DID which successfuly rings to ext 202 I am using asterisk@home and through the AMP inface the line should ring to ext 202 Below are Asterisk Messages, Extensions.conf and Extensions_additional.conf Extensions.conf

by "GUI" do you mean a configuration utility or a User Interface? MATT--- -----Original Message----- From: Jon Gabrielson [mailto:jon@directfreight.com] Sent: Thursday, February 10, 2005 10:48 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] asterisk GUI's that supports zap fxs extensions Are there any gui's that support zap fxs

I'm trying to create a new contex for incomming calls from certain trunks. My problem is this calls are not checked through ext-did (for incoming routing). The calls from standard trunks are filtered correctly but these ones are not. Is there some way to debug what file/line is being executed by asterisk? My custom context is this: [from-pstn-nofax] include => from-pstn-custominclude

I am trying to get remote extensions to work correctly with agents. I have ackcall=yes and have agents logged in to extension 101 using agentcallbacklogin with extension 101 defined as: exten => 101,1,Dial(Zap/3/18165551234,20,tTA(custom/presspoundtoanswer)) This setup works great on local and/or voip channels, but on zap channels, the zap channel answers immediately as soon as it goes off

Hi, it's me again with a cdr-issue. I have the following example extensions.conf: # dial in exten => 100,1,Playback(hello) exten => 100,n,Dial(local/200,20,rtg) exten => 100,n,Playback(pleasewait) exten => 100,n,wait(10) exten => 100,n,Playback(goodbye) exten => 100,n,Hangup # for local dial exten => 200,1,Playback(hello) exten => 200,n,wait(10) exten =>

Hello all, I think I have most of my AAH 1.3 setup running (Asterisk 1.0.9), but somehow something is not quite right with my vMail setup. I would have sworn this was all working, but maybe I was just dreaming. Anyway here is what is happening, say I am on extension 200 and I want to call to extension 201. If extension 201 is no connected, then it rolls right into vMail with the message the

Hi, I have configured an Asterisk server with TDM01P (1FXO) for testing purpose. The interface I'm using is AMP. I want to configure my extension so that when I dial from my mobile phone to the asterisk line, I want it to transfer the call to any extension, say 3042 and after a particular number of rings, transfer the call to voice mail so that I can record my message. My Zaptel.conf is as

Hello , I want to enable recording for a few extensions. In sip.conf it is defined as record_out=Always record_in=Always under the section of extension.but it doesn't work. Extensions are defined in the extension_additional.conf file like exten => 10,1,Macro(exten-vm,10,10) exten => 10,hint,SIP/10 exten => ${VM_PREFIX}10,1,Macro(vm,10,DIRECTDIAL) I can't be sure

I am seeing the following in my log file (standard trixbox install). One seems to be complaining about an error in the dialplan but it won't tell me what file or what line. The other (maybe related) is complaining about a channel lock. How to do go about trying to figure out what the problem is and how to solve it? ---------------Logfile-------------------------------------------- Nov 14

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

Came upon a problem today that I thought I'd see if it's by design, if I'm missing an option somewhere, or if my fix is the way to fix it. We setup a remote location with a server, same as we've done with others, but for some reason when they would transfer an outside call anywhere it would pause for a few seconds and hang up the line. Well, after spending most of the day on

Hi, I set up a ring group. I would like for people who select a certain voice menu option to ring a list of extensions (I have just one extension in there at the moment) and if it doesn't answer to go to an extension's voice mail. I am using a version of asterisk from CVS, last updated a couple of weeks ago. This line in extensions_addtional.conf sends the call to ringgroup 3 if

I have a rather long dial plan, but it includes support for call waiting. However, the setgroup checkgroup commands don't seem to be working. Can anyone help on this one? Excerpts are below. First exten-vm is dialed and then dial-new. As I understand, priority 1 increments the active channels for the caller and then in "dial-new" priority 8 increments for Arg3, or the Callee

Hi all. Just to update list and increase the "souls-save" database. The patch solved the problem. Now I have an asterisk-1.2.0-beta1 with asterisk-perl-0.08 and mysql-server-3.23.58-16.FC2.1 machine working fine with ASTCC and "inuse" flag. The link of the patch is: http://bugs.digium.com/view.php?id=5400 Best regards to all you in the list. Ricardo Poppi.

My company for various reasons has asked that I come up with a way to have previously parked calls be re-parked in the same parking slot. I have looked at setting up asterisk so that the receptionist chooses which slot to place a call, but I think there is an easier way. That is when I came up with the idea of "Sticky Park". Here is how it would work. A call would come in and

Hi all, as in last mail, i've installed Asterisk from CVS and AMP to manage it. I've made 4 extensions: moloch*CLI> sip show peers Name/username Host Dyn Nat ACL Mask Port Status 204/204 (Unspecified) D 255.255.255.255 0 UNKNOWN 203/203 192.167.125.9 D 255.255.255.255 5062 OK (3 ms) 202/202