similar to: Asterisk and Max TNT

Hi All, I have a lab setup with two asterisk servers and a MAX TNT in the middle like this: asterisk sip >< sip TNT pri >< pri asterisk The TNT is running 11.0.6 and the asterisk servers are running 1.2.9.1. I can get calls to pass from asterisk sip to tnt to pri to asterisk but not the other way. The call from asterisk to pri to tnt is good, the TNT is passing SIP invite to the

I'm trying to get inbound calls from a TNT working but get 407 errors from the TNT. This is what I have in sip.conf: [maxtnt] type=friend host=x.x.x.x dtmfmode=rfc2833 callerid="MaxTNT" <maxtnt> context=demo qualify=yes disallow=all allow=g729 allow=ulaw insecure=very This is what the TNT is spitting out: Jul 24 14:55:12 tnt1 1/17: Releasing

I'm looking for someone familiar with setting up some of the more advanced features of the Lucent TNT, preferably someone with knowledge of Trunk Groups and choosing outgoing PRI channels based on call type and perhaps NPA-NXX We currently have 8 PRI's. 7 of them are for our dialup pool, the 8th is for our voip. We currently run the dialup PRI's to a seperate TNT We want to

Hello folks, I've been trying to get T.38 over SIP working with calls terminated by a MAX/Lucent/Ascent TNT. As far as I can tell, SIP and T.38 are actually working perfectly; however, I can't get the TNT to properly terminate a FAX call. Does anyone have a working configuration for SIP and T.38 for calls from a TNT or APX? Here's a brief description/diagram of my test setup:

Hi All, We are using MAX TNT to for some T1 PRI interconnects. I'm seeing the voice channels connect at 56K. Does anyone have the DS0 channels connecting at 64K for voice, if so what is the parameter to select 56k or 64k channels? I'm not having any issues that I know of, just wanted to bounce this off the group for a sanity check. Thanks. JR -- JR Richardson Engineering for the

Hello all. I'm new to asterisk and have been using and testing it for about a week now. My initial hope has been to use it as a sip<->h323 gateway to tie SIP & H323 based ip phones together with my Cisco AS5300 and Lucent MaxTNT/MVAM networks. I am currently running Asterisk 0.5.0 under Redhat 9 on a single PIII 800 with 256megs RAM. I have tried a couple CVS version from the past

Hi All, I'm trying to track down an intermittent echo issue. My setup is <phone>sip<asterisk>sip<tnt>pri to carrier less than 10ms latency on the network, 100% SIP, ULAW I have several different phones; cisco, linksys, polycom, snom. It's difficult for me to reproduce the problem regularly so I'm really having trouble isolating anything. I'm wondering if this

Does anyone have a MAX/APX with working ingress PRI calling name? I recently acquired a MAX TNT on the cheap and it's integrating fine except for one thing. In the 11.0.0 release notes, it is stated that ISDN calling name will, if present and permitted by presentation flags, be added to the From: and Remote-Party-ID: headers of the INVITE. I'm not able to make this happen. Pcap

Hello, I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like to be able to direct an inbound fax call into my TNT, have it answer the fax and send the image file over to Asterisk, or some other system to deliver to an e-mail address(s). I'm not sure if I need Asterisk to any of the call control or not. I'd also like to setup a print queue and have outbound

I am having a problem trying to do inband DTMF passthru via asterisk. My setup: PSTN gateway MAXTNT v11.0 SIP (T1 PRI/NT2) Asterisk HEAD or v1.0 makes no difference (I am using HEAD mostly) 12/10/04 and 01/17/05 (no difference) CAC ABII-T100P to/from analog lines to/from asterisk BTW, I have used a ABI and it works just like the ABII with asterisk. What I am seeing is: I make a call from a

I have officially engaged in a pissing contest with the local Telco over PRI calling name delivery. The telco publishes their calling name delivery over PRI feature as being bellcore gr-1367-core compliant. The gr-1367-core spec states that the calling name is to be included as a facility IE in the setup message, or sent in a subsequent facility IE message with an indicator in the setup message

Hi ALL, I'm using this TNT to front-end an asterisk cluster, working pretty well so far. Some T1's are inbound from PSTN PRI's and others are Outbound to PSTN PRI's. Specifying what traffic to send out what PRI is pretty easy, we have unique trunk numbers assigned to specific T1's or groups of T1's, so when I send SIP traffic to the TNT, I prepend the dialed call with

> what is the sip.conf for 1239 > which I'm going to assume is a extension on the TNT > > Barry > > JR Richardson wrote: > > Hi All, > > > > I have a lab setup with two asterisk servers and a MAX TNT in the > > middle like this: > > > > asterisk sip >< sip TNT pri >< pri asterisk exten 1239 is the CID Number from the

If you are looking for real high density VOIP termination I would look at > something like a Lucent APX 8000, configure correctly it can pass 2500+ > g.729 calls to the PSTN course we paid lots of $ for ours. > > Chris > Chris, My experience has been that the APX and TNT products require a single SIP proxy, how are you load balancing 2500 calls? If all of the traffic is

Im having some problems with connecting a TNT to asterisk. The problem is when the call is sent to asterisk and signaling is done the RTP syncs however no audio is produced. Can someone give me some idea of how to accomplish this? I am using the standard configs and g711 and 729 do the same. No audio. Public IPs on both ends. No nat. Any ideas would be appreciated.

Anyone have experience with T.38 passthru in Asterisk 1.4 to a MAX TNT Media Gateway? We're experiencing sporadic results... Topology is described below... Thanks in advance.. -Joe Traditional Fax <-Analog Line-> ATA <-SIP-> Ast1.4T.38Passthru <-SIP-> MAX TNT <-PRI-> PSTN -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, Any of you Max TNT Guru's out there have some sample configs for a Max TNT running 11.0.6 code? The example on the wiki was for 10.0 code, it doesn't quite match up with the newer 11.0.6 TOAS release. Any help will be greatly appreciated. Thanks. JR -- JR Richardson Engineering for the Masses

I'm running SIP between my Lucent TNT acting as a gateway, and an asterisk server. We have a PRI coming into the Lucent. Basically the problem I'm having is mostly on inbound calls but some outbound calls as well. I hear echo and sometimes some weird artifacting on calls coming in from the lucent. Everything routed over IAX to VoIP Jet or Nufone sounds fine. It seems like every 3

Anyone out there have success getting caller id name from a pri, through a lucent tnt, to asterisk? What about from other media gateways? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050809/d3f02c3d/attachment.htm

I am looking for someone who know what they are doing with a TnT MAX to help me get started with configuring the thing. The unit will have 6 PRI's and 18 E&M T1's going into it and sending the calls out VoIP to asterisk boxes and to upstream voip providers. Has 3 x 8T1 cards and 8 x 96 VoIP DSP cards. Willing to pay for your time. Email me at mezzmor at aim dot com.