similar to: Snom hardware quality

Hello List. I am setting up asterisk as a central dialplan, voicemail and conference solution, connected to 12 Cisco 1760 Routers running Call Manager Express IOS distributed around the world. This is all done over VPN. These routers all have PSTN access in their respective country. So far all is good, and Asterisks interopability with the Cisco CME using SIP is very good, although

Hello! I've been reading through the archives on this list for the last 8-10 months. There are some reports on success with tftp autoconfiguration with a given cfg.txt format but really vague. Has anybody successfully done this without using GAPS, or has anybody got a correctly formatted cfg.txt file that works (from GAPS). I would be happy to write a script or a java program that

If you wan't to create a ringtone with makering.pl for firmware 1.0.50, be sure to create it as ring.bin and then rename it to ring1.bin / ring2.bin or ring3.bin. This seems to be the only change between the format from 1.0.4.68. Regards, Maron

Hi, Try this: dat1<- read.csv("dat7.csv",header=TRUE,stringsAsFactors=FALSE,sep="\t") dat.bru<- dat1[!is.na(dat1$evnmt_brutal),] fun1<- function(dat){??? ? ??? lst1<- split(dat,dat$patient_id) ??? lst2<- lapply(lst1,function(x) x[cumsum(x$evnmt_brutal==0)>0,]) ??? lst3<- lapply(lst2,function(x) x[!(all(x$evnmt_brutal==1)|all(x$evnmt_brutal==0)),]) ???

Hi all, I'm running Asterisk since two days, and it's really one of the phatest software available on the net!!! Respect!!! I have connected Asterisk as a call manager for a cisco gatekeeper. Everything works fine internal, but if I want to ring to a PSTN over another call manager, which is connected over ISDN, I get the following output. Has anyone experience in this or can help me?

Hi, May be this helps: dat1<- read.csv("dat7.csv",header=TRUE,stringsAsFactors=FALSE,sep="\t") dat.bru<- dat1[!is.na(dat1$evnmt_brutal),] fun2<- function(dat){?? ????? lst1<- split(dat,dat$patient_id) ??? lst2<- lapply(lst1,function(x) x[cumsum(x$evnmt_brutal==0)>0,]) ??? lst3<- lapply(lst2,function(x) x[!(all(x$evnmt_brutal==1)|all(x$evnmt_brutal==0)),])

Hello all I am updating a test system from Debian 5 and Xen 3.2 to Debian 6 and Xen 4. After dist-upgrading, I did: aptitude -P install xen-hypervisor-4.0-i386 linux-image-xen-686 And then fixed Grub2 to boot the xen kernel. cat /etc/debian_version return 6, uname -a returns: Linux xen-test 2.6.32-5-xen-686 #1 SMP Wed Jan 12 07:52:18 UTC 2011 i686 GNU/Linux So far so good. I previously

Hey all, after hooking up some Plantronics to some Snom's (3 320's 1 360), I noticed my client is having some form of feed back on the phone. Because of Snom's "inner oddities" this is how I got it to work. Plantronic --> RJ11 --> SnomHandset Port (on Snom Base) Handset --> Plantronic jack (bottom base in the front) If I placed Plantronic(RJ11) --> Snom's

Hello! I have a staff member abroad and need to provide him with the ability to make local calls. The features I need are: * Possibillity to make calls at local (Icelandic) charges from Ireland office. * Possibillity to call the local Icelandic number and reach the Ireland office. I'm also wondering if there is any isdn based solution since there is a possibillity of another staff

Found out I was doing it right, but the outbound firewalls that the Snom's sits behind has a captive portal that intercepted the HTTP request. Adding the Snom's MAC address to the firewall's captive portal worked correctly. A shortcut for any future Snom users that want to update firmware remotely: 1. In the web portal, click Advanced 2. Scroll down until you get to "Update

Several of my SIP users are in the habit of diverting all their calls to an assistant when they're out of the office. When these calls ring on the assistant's phone, she wants to be able to tell which number they've been forwarded from so that she can say "Joe Blow's phone" or whatever when she picks up the call. The assistant's phone is a snom 360, which normally

Hi List, Has anyone got the record button to work on the Snom's? Im looking to have it send a email with a attachemnt of what the user records I hope. It looks like you just point the button to exten@proxy and just have that extension record it. Any clue on how to do this, just use Record() or Voicemail(s1234). Any suggesstions, any luck with this? Thanks! -------------- next part

Hi List, Here is the config ext 2601 is a GS BT-101 phone ext 2062 is a SNOM 200 latest public firmware on both asterisk is Asterisk CVS-11/14/03-22:55:45 Make a call from 2601 -> 2602 life good, call works have 2602 place call on hold. The music on 2601 IS NOT my music on hold. It seems its a MOH server SNOM has. take call off of hold on 2602 and 2601 still trys to play parts

Can anyone help with BLF for Snom 300s ? (Asterisk 1.4.10.1) I've setup hints for a couple of Snom 300's but Asterisk doesn't send Extension Changed messages to subscribed phones unless the second 'line' button is used (I've tried Snom's version 6 and 7 and two difference 300s). On the Asterisk Console I don't see any message when picking up a Snom 300 and dialing

Ok, not exactly an Asterisk problem, but... I picked up some SNOM 200 phones because SNOM's have been recommended for use with Asterisk and they have line buttons that can subscribe to presence. However, they don't appear to power up when connected to my Negear FS108P, which is an 802.3af Power-over-ethernet capable hub. I am pretty sure these are the SNOM 200b, in that the ethernet

Has anyone had success with the Snom 190 displaying caller ID name and number on the Snom 190 on for an inbound call from *? Right now our Snom's only show the caller id name, not number. I know the number is transmitted from the Telco and received by * since the number shows on the incoming call event at the * console. We are not setting the caller id in the extensions.conf, simply passing

Long story short... Snom's ... Retrieve button... works when MWI is *NOT* lit but does *NOT* work when it is lit. Any advice Useragent : snom360/6.5.2 Function: F_RETRIEVE [root@pbx ~]# asterisk -rx "show version" Asterisk 1.2.13 built by root @ pbx on a i686 running Linux on 2006-11-17 16:35:22 UTC [gateway] exten => 201,hint,SIP/201 exten =>

I would like to use one of my Snom 200's 5 programmable keys to park calls. I am using image SIP 2.04g. I have tried a variety of combinations and have come to the conclusion that: 1) On the Key Mappings administration page, I must select the "Transfer" under the "Break Keys" option box to be able to successfully transfer calls using the "Transfer" button. 2)

Hi, I want to pick up a call with the snom's programmable buttons(snom190 -SIP 3.60x, snom360-SIP 4.1) with asterisk server (v 1.2.0), I tried with the option 'Destination' and when the incoming call arrive to another snom phone the button blinking. In this way I can only pick down it pressing the blinking button. The solution is call the *8 or parcking the call but my pbroblem

I'm planning on setting up some remote agents and before doing so, I did some simple PING tests to measure latency. The average latency I got was 250ms. Does anyone have experience in terms of quality of calls when there is such high latency? Can anyone comment? Thanks, Waldo