similar to: SNOM, Asterisk and Attended transfer (bug?)

Hello all, I am running into some problems with a snom 105 phone trying to do a attended transfer . Snom phones are connected to Asterisk. This does not work, it will only do a unattended transfer. I have downloaded the manual from snom and followed the instructions. Has anyone experienced the same problem ? any ideas how to solve the problem. thanks, Arne.

Good day all I have asterisk on a box with one network card I have a 2 companies setup on the system. To keep all apart I binded a different ip to the interface,i,o,w eth0 192.168.0.254 and eth0:1 192.168.1.254 And in sip.conf I took the bind setting out So each company's phones are on a different ip range,and all worked well So we decide to pull the snom190 out and exchange it with a snom360

I have setup an asterisk based phone system using snom-320 (SIP based) phones. I would like to change what seems to be the default procedure for an attended call transfer. Right now, the phone user places the call on hold, calls the extension using a "extension" button on the phone, speaks with the call recipient , and presses transfer to transfer the held call. The users would like

OK, last showstopper that I just can't puzzle my way through - parking calls with the snom phones. I get the two phones connected, I hit transfer on one, the other phone goes to MOH and the first phone gives me DT, so I dial 700 and hit the OK button. Call transferred, the SNOM hangs up before I have a chance to hear which extension it parked to. Is there a way to make the SNOM phones

Here is a part of a working sip.conf for Asterisk with SNOM190 Phones. Try using host=dynamic and have a closer look at the configuration in the snom 190. Also, try using dtmfmode=rfc2833 . [general] realm = hallinux2.gwsnettech.local port = 5060 bindaddr = 0.0.0.0 context = default disallow=all allow=alaw allow=ulaw allow=gsm register => 081503:xxxxxx@sipgate.de/081503 language=de tos=0x04

Hi, I am using SNOM phones with Asterisks for few years. They used go occasionaly NR, and I would reregister them from the phone web interface. But it started doing frequently for last few months. Here are SNOM Phone and the firmware version; snom190-SIP - Version-Code: snom190-SIP 3.56m snom320-SIP - snom320 jffs2 v3.36 snom300-SIP - snom300-SIP 6.5.2 Asterisk version - Asterisk

Hi, everyone: I'm in the processing of deciding what IP phones we should use with our Asterisk server, and I wanted to get feedback from the user community on the quality, reliability and ease of operation of Snom phones. What do you have to say about these phones? Are there other phones you'd suggest along with or instead of Snom? Thanks, -Stephen-

Hello List- I'm having a problem getting snom 190 phones to transfer a call to another local extension. Here is the scenario: A call (call1) comes in from the PSTN to (exten1). (via pri, if that matters) Another call (call2) comes in to (exten1). (call1) is put on hold while (call2) is answered. (call2) is then transferred to (exten2) using the "Xfer" button on the snom phone. This

Hi, in the Snom FAQ I found the following information: After staring up, the phone tries the URL given in the "Setting URL" of the phone. ... BTW this setting can also be set via DHCP. .... option tftp-server-name "http://192.168.0.9/snom200{mac}.htm" The documents used: FAQ-04-06-14-sf.pdf "Setting up DHCP for snom phones" FAQ-04-03-24-sf.pdf "How can I

I am just playing with a SNOM 190. Overall, I'm very impressed with the quality of the unit and the feature set. I am running the latest firmware (snom190-SIP 3.57u) and the asterisk CVS from last night (1/3/05). The only problem that I've encountered so far is with Call Forwarding, which doesn't work at all. The Snom phone is sending a "486 - Busy Here" back to *, which

Hi all, I have had quite a few customer complaints about attended transfer cutting off callers. The problem is when reception is busy she doesn't always wait for someone to answer the call, however hanging up a ringing transfer on attended also hangs up the caller. I have checked the scripts I don't *think* this is a dial plan error but if anyone has this working correctly on Asterisk

Hi, I want to pick up a call with the snom's programmable buttons(snom190 -SIP 3.60x, snom360-SIP 4.1) with asterisk server (v 1.2.0), I tried with the option 'Destination' and when the incoming call arrive to another snom phone the button blinking. In this way I can only pick down it pressing the blinking button. The solution is call the *8 or parcking the call but my pbroblem

Anyone know how I can push a firmware update to a Snom 190 without using DHCP? In the web interface, I specify a path to the Snom firmware, and it works, except I have to physically press OK to get the update to download. I need to do it remotely...

Hi All, Does any one know if attended call transfer has been added into the STABLE release of asterisk yet? Potentially using a mix of phones would create confusion in a user base, any ideas on attended transfer or how to achieve this / mods to dial plan etc would be greatly appreciated. I have been on an almost vertical learning curve with Asterisk and Linux for 6 months this is just

Hi All, I realise this is off topic, but its likely the best place to ask! I sent an email to snom support a few days ago but have yet to recieve a response.. Perhaps some one has found a solution to this problem already? I've searched the mailing lists and google and found nothing useful. I've also read Snom's mass deployment documentation but thats no real help in this case.

Hi, I've looked through the archives and seen references to placing calls on hold on a snom 200 (any version of the firmware but we have the latest: 2.05e.) Basically, we can't place calls on hold on the snom 200! The manual talks about the Flash button (which is really the "R" button, as far as I can tell.) Pressing the R button will immediately disconnect the incoming call.

On Thu, March 5, 2015 09:56, Ruben R?gels wrote: > > Hi again, > > I'm glad to hear that I provided a somehow useful answer. > > Unfortunatelly, I don't know these details. > If you wasn't lucky consulting the snom docs, maybe the snom support > can be helpful with information about the exact implementation > details. > > You also could use "sip

I cannot get the transfer button to work on a Snom 190, I cannot get the # to work either. Any ideas? Regards Thorben -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041207/5ac06747/attachment.htm

I am having a hell of a time with transfers. First the Snom issues: The transfer button on the Snom 220 does not work. I have read about setting break key off in the advanced page of the web config but the Snom 220 has no such option. At the moment I am having to use the # transfer hack which makes this phone look really stupid to have buttons on it that cannot be used. Anyone know how to

Hi, I am sorry to be asking this but the wiki is down and has been for a couple of days and I need to get this working before Monday to get my live system setup. Trying to get the Snom 190's and soon to arrive 3com 3102's to use the function keys and for the life of me I can't work it out from the conversations on the archive what I am going exactly wrong here? The snom 190 with