similar to: Newie Questions

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

I am looking at setting up the following configuration and any help/input/comments before signing the PRI contracts will be greatly appreciated. PRI Tampa PRI Sarasota PRI <--> Nortel BCM-->Asterisk<------------------>Asterisk<---> I would like to link the Nortel BCM to * using the a digital trunk card. The BCM will

Has anyone fed a Nortel BCM from Asterisk? I'm interested in switching our company over, but don't want to replace all the handsets in one fell swoop. I imagine some of the PRI cards can "emulate" a switch? I'd still like to pass CallerID into the Nortel, etc but all the external traffic would be VOIP, not TDM.

I've been trying to look up information on upgrading firmware on a nortel i2004 ip phone. I have this phone leftover from a trial, and it's supposed to be upgradable to current firmwares. Since I also run a DMS I was able to login to nortel's site and get all the firmware files, but All the NTP's regarding firmware upgrading these are how to tell you BCM to send the file to it.

I'm looking to build a VoIP solution for 100+ service vehicles that have WiFi hot spots installed (with cellular uplinks). Currently we are trying out Skype wireless handselts and Majick Jack. I'd also like to consider an Open Source solution that can bring the calls back to our data center [possibly integrated without our existing BCM 3.x VoIP PBX]. For hardware someone on the IRC

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

This are "suppose" to be SIP based phones. I just got one to play with, no docs, no nothing. before I start spending time trying to sort it out I thought I'd ask to see if anyone had made one work with AST, and if they have any pearls of wisdom. mucho thanks

Hi, I'm trying to connect * to Nortel BCM 50, This PBX use H.323 v3 to interface with other PBX. The port use to connect is TCP 1720 but I can't configure this port on my * box. I'm using a H.323.conf file sample to activate the port but the * isn't listening there. Somebody have any idea or tip? This is mi H.323.conf [general] port = 1720 bindaddr =

Hi everyone, I was referred to this mailing list by Richard Mudgett regarding the following thread on Issue Tracker as it's a feature request and not a bug:https://issues.asterisk.org/jira/browse/PRI-170 We've got a Nortel BCM (actually 2 BCM50s and 1 BCM400)... all showing the same problem. When a call comes in the number shows up OK but the name does not. In looking at the ISDN messages

Is anybody using Nortel IP Phone? I have (second hand) Nortel i2002 phone and when it boots I get: DHCP server unreachable F/W version: 0604D9C My setting: DHCP? [0-No, 1-Yes]: 1 DHCP: 0-Full, 1-Partial: 0 Can any body suggest how to troubleshoot it? -- #Joseph GPG KeyID: ED0E1FB7

Hi all,as good? It would like to know if already they had had success, in the integration of the functions of asterisk, with one pabx legacy (Avaya)for that pabx avaya, could use the voicemail of asterisk. For sample, user of pabx avaya, it would have its calls directed for not attendance and busy, for asterisk and asterisk, it would send the same one for the voicemail. Best Regards Josu?

hi, I am a system admin who has just set up R-2.3.1 in suse 9.1 (opteron) for a previous windows user. Please forgive any obvious stupid questions :) We are struggling with a number of things. 1. is there a gui interface ? How do we use it ? R --gui just gets us to the command line. 2. how do we do unix commands like cd ? 3. can we define default directories - eg for data files ? 4.

Has anyone observed a problem where using Local channels with AddQueueMember results in missing TRANSFER events? Right now I'm using straight SIP channels when I call AddQueueMember(). I'm contemplating moving to Local channels because the non-state-based wrapuptime blows when you have a channel in multiple queues (they can hang up and get a call immediately so long as it's from a

Greetings! Has anyone - or is it even possible to - set up Asterisk with multiple SIP Clients to a Nortel BCM switch? The intent is to set up an Asterisk IVR behind the BCM, have the BCM route calls to Asterisk IVR and then transfer calls to one of two queues in the BCM based on ANI and some database information. The wiki (and Google) only mentions PRI, Line-side T1 or H.323 interfaces to the

I'm staring at an RFP--this company wants to replace a 2000 position PBX (at eight locations) with a new system. Their mindset is Nortel/Avaya because they talk about 28-button digital sets. The do specify a few IP phones for just one location, so they are aware of VoIP. I'm going to bid on this--there's nothing to lose except the time it takes to write the proposal. I'll

Hi List; Asterisk does not have any kind of cards that can work with it to be used with Digital Phones (digital phones differ than analoge phone and differ than IP Phones). Anyone can advise about this as I did not find this on Diguim Regards Bilal Ghayad __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around

Hello. Second question. Should I be asking this on the dev list (that's not the question by the way). Q. - there are several mentions on the list that asterisk :- "can interoperate with almost all standards-based telephony equipment" "interconnection with digital and analog telephony equipment" "visual message waiting indicator" etc. etc, That seems

Dear All, Is it possible to install * in front of a Avaya IP 406 system via a T connector E1 tap so it's external to the Avaya system? We would like to record upto 60 channels (2 * ISDN30e). This may increase later. Also, could the calls go into the cdr for retrieval/browsing later? What hardware/server would you recommend? Thanks.

Thank you all for the voicemail cards you sent. If you have the following in PDF or laying around (scan): * AT&T/Cingular flow voicemail card * Verizon flow voicemail card * Sprint flow voicemail card * TMobile flow voicemail card * Alltel flow voicemail card * Avaya Nortel Octel flow voicemail card * Comedian Mail (Asterisk) -- I have the flow, need a card if someone has one I will work on

Does anyone on this list know of any Linux based apps that will work with Dialogic or Brooktrout that provides voice-mail/Autoattendant only?? It seems that Panasonic, Avaya, and Mitel all use Unix/linux based OS on their firmware for their proprietary voice mails. My wish list would be; A software that provides all of the drivers for a dialogic or brooktrout board Voice Mail Messages in WAV