similar to: IAX2 Max Retries dropped calls Firefly

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Outbound calls on my Telus PRI aren't taking the Name portion of the callerID. I've looked at the logs, and it is being set (see below), but the PRI debug output doesn't show the name being sent anywhere. As a result, received calls always display from Unknown (or just the number). Is there some config that I've missed somewhere? I'm running NI-1 (Telus says NI-2 doesn't

I am trying to collect enough information about an problem a client is having with its asterisk 11.17.0 x86_64. This issue was observed before in 1.8.20, and we upgraded to 11.15.0 and then to 11.17.0 with no solution. Background: this client is a telemarketing call-center that generates outgoing calls with close to a hundred agents operating simultaneously in peak hours. The system uses

Hi Timo, I am receiving the above error in dovecot's logs, here's how it looks like: dovecot: Aug 05 19:52:19 Info: imap-login: Login: user=<XXXXXXXXXXXX>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured dovecot: Aug 05 19:53:36 Error: IMAP(XXXXXXXXXXXX): FETCH for mailbox Bulk Mails UID 32 got too little data: 9199 vs 39532 dovecot: Aug 05 19:53:36 Info: IMAP(XXXXXXXXXXXX):

Have you tried Asterisk 13? The bridging mechanism has been completely rewritten on Asterisk 12, so there's no longer channel masquerading and zombie channels. Might be worth a try. 2015-04-07 20:33 GMT-03:00 Alex Villac??s Lasso <a_villacis at palosanto.com>: > El 07/04/15 a las 17:38, Alex Villac??s Lasso escribi?: > > I am trying to collect enough information about an

Hi there I am using an IAX2 softphone built from the IaxClient library dialing into Meetme conferences. The IaxClient seems to use silence suppression, and not sure if this can be disabled. The client works fine through most routers, but for some it disconnects the client after about 5 minutes and gives this error in the asterisk logs: Chan_iax2.c:1480 attempt_transmit: Max retries exceeded to

Hi! I'm running 1.1rc4 on a system and this happens occasionally: --8<-- mail.info; dovecot: auth(default): client in: AUTH 1 PLAIN service=imap lip=NN.NN.NN.NN rip=NNN.NN.NNN.NN lport=143 mail.info; dovecot: auth-worker(default): pam(XXXXXXXXXXXX,NNN.NN.NNN.NN): lookup service=imap kern.alert; kernel: grsec: From NN.NN.NN.NN: denied resource overstep by requesting

I'm running into a situation where a bogus bonded interface named "bond0" is being created, in addition to the desired "bond2" interface. Can anyone confirm this? Anyone know why it's happening or what I do to get rid of it? I wanted to start my numbering scheme at 2 instead of 0, which I didn't think would be a problem. As you can see, I have no reference

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

>> Doesn't work. Apparently the Dell UEFI PXE firmware doesn't know HTTP. > > There's a lot of variation. Do you have a shell option > in your boot selections? None of Dell OptiPlex 990 (firmware A19), 9010 (firmware A22), nor 9020 (firmware A16) seem have a built-in EFI shell option, but in all three cases I had success running the external EFI shell from

Hi, I have a small problem when using barchart. I have the following data: letters a 6 f 18 1 a 15 10 j 12 9 i 12 4 d 9 5 e 6 The data is from a survey and summaries the alternatives selected in one question. The idea is to have a bar chart illustrating the count of each selection in descending order. The data frame is already ordered in

2014-02-26 1:45 GMT+01:00 Jason R Begley <jayray at digitalgoat.com>: > Sorry, I just now figured out how to get a usable output. > -Option one doesn't work at all for me. > > snmp_build: unknown failuresnmpget: Error building ASN.1 representation > (Can't build OID for variable) > COUNT = 0 / 0 > Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h > Creating

Hi All I'm trying to get two Asterisk servers to talk to each other using IAX(2). I've read the WiKi and the docs and tried the examples..... I can't get it to work (I have 2 x 7960's registering on one server and 1 x 7960 registering on the other). I've set them up as follows... The two servers are set up as friends and have consecutive IP address's. The setup is

https://bugzilla.mindrot.org/show_bug.cgi?id=1886 Summary: Please move /tmp/ssh-XXXXXXXXXXXX directory to /var/run Product: Portable OpenSSH Version: 5.8p1 Platform: All OS/Version: All Status: NEW Severity: normal Priority: P2 Component: ssh-agent AssignedTo: unassigned-bugs at

hi any one tell me how to make a dialplan my extensions.conf exten => _40XXXXXXXXXXXX,1,Dial(OH323/${EXTEN}) i want to dial to 40XXXXXXXXXXXX number. XXXXXXXXXXXX could be any number like 923335224005 or 92512213248 at the moment when i am trying to dial 40923335224005 asterisk is dialing Executing Dial("OH323/R11429", "OH323/40923335224005") but i want him to dial

Hi there, do I have a local problem, or is registration at IAXTEL impossible at the moment? "iax2 show registry" permanently shows a TIMEOUT for 69.73.19.178. Philipp

I have the following setup: DS3 -> Cisco AS5400 -> H.323 (ooh323) -> Asterisk Inbound calls work great but outbound calls fail. So to check and make sure we have outbound calling ability on the DS3 we setup a Cisco Call Manager Express and it can make outbound calls both local and long distance with no problems. The failure code is Cause i = 0x8381 - Unallocated/unassigned number. We

I have a very lite layout and attempting to get the SIP configuration set up initially before proceeding into other areas. VMware is running my Asterisk 11 on Ubuntu 12. Shouldnt I be able to at least ping the SIP provider IP? I run command "sip show registry" and do not see it set up. I run sip show peers and I do see an entry. I have not configured anything other then entries in the

Hi to all i have compiled and installed dovecot 2.3.2.1 on debian 6 with success but now i'm facing a strange problem on communication from postfix installed on server A with dovecot installed on server B (which version is 2.3.2.1). All incoming emails delivered from esternal from server A to server B with LMTP is rejected with this message error "smtpgw postfix/lmtp[1772]: 6194CA00B3:

On my CentOS 6 partition of my laptop: First note that for this test, NetworkManager is not running because I did: chkconfig --del NetworkManager and then rebooted. Here is my ifcfg-eth0: DEVICE="eth0" NM_CONTROLLED="no" ONBOOT=no HWADDR=xx:xx:xx:xx:xx:xx TYPE=Ethernet BOOTPROTO=none IPADDR=192.168.2.5 PREFIX=24 GATEWAY=192.168.2.1 DNS1=192.168.2.1 DNS2=192.168.2.1