similar to: meetme recording of one user in the conference

Hi guys Ive been trying to get this to work for ages now, basicaly im trying to do if ${woteva} = "" (nothing), or its none existenant then do label 1, else label 2. for my last called function, so it will play a different message if theres no last call in the system or it was anonymous. ive tried exten => 1000,1,GotoIf($[${last-call${CALLERIDNUM}} = ""]?4:5) and heaps of

Well, I thought I had my problem solved, but it is acting up again. Hopefully this time I can provide enough information. What I have is an * box setup with one X100P and TDM400 with one FXO and one FXS. For my regular setup with interfacing with my PSTN and my entire house with analog phones, the box is working great. I am trying to interface a Mediatrix 1202 device to my * box via the

Hi Folks, I've been playing with call recording for our support department which was kinda going ok until I spotted something odd in the CDR. None of the support calls are being entered into the CDR properly. I'm using mysql as the back end and Areski's web based front end and all was going fine. The problem seems to be that the CDR doesn't get populated with the destination

I want to record all phone calls made inbound and outbound. I'm new so having a hard time getting this started. Here is what I have so far but isn't working. Can someone help me out? Thanks, [macro-record-on] exten => s,1,SetVar(CALLFILENAME=${DATETIME}-${ARG2}-${ARG1}) exten => s,2,Monitor(wav,${CALLFILENAME}) [sip] include => macro-record-on include => iaxtel exten

Here is what I have now. Where should the line " exten => _.,1,macro(record-on,${EXTEN},${CALLERIDNUM})" go should it be under [sip]? Right now if I call sip to sip monitoring starts and the calls connect but I only get 44 byte files. If I call and iaxtel number monitoring starts but call never gets placed and again 44byte files with nothing in them. Thanks for the help. [iaxtel]

I'm trying to set on-demand call recording. Here's a snippet of the pertinent dialplan. The purpose of this is to allow one user in particular to be able to receive an email recording of the call everytime he dials *91 + number. The problem is that the email is not going out or being generated when I use the ${CALLFILENAME} variable. When I use the actual file name of the gsm recording,

This is what I'm doing it gets you both sides of the phone call...small size...and playable on windows through a share. My notes: On redhat 9 I have to run the following command for asterisk to start LD_ASSUME_KERNEL=2.4.1 asterisk -vvvvgc [macro-record-on] exten => s,1,SetVar(CALLFILENAME=${TIMESTAMP}-${ARG2}-${ARG1}) exten => s,2,Monitor(wav,${CALLFILENAME}) ;exten =>

Hi folks, I'm running asterisk 1.2.10 and I need to use agent dynamic login. I read some doc and follow some tutorials but the agents can't login into the queue. Asterisk ask to me to dial the password agent and after this, it doesn't do nothing ( it doesn't tell login ok or login incorrect..). In the * console if I do show agents, any agent are logged. Any help will be

Hi Folks, I am newbie to asterisk. Recentely I have installed asterisk on Linux Fedora 2 box. After reading some document, I tried to configure the server. When I connect to our server, SIP user-agent shows that I am logged in. But it doesn't show my system(client) IP when I issue command at astrisk CLI. The O/P is as below. *CLI> sip show peers Name/username Host

I am trying to record a call into a stereo mp3 in Asterisk 1.4, but I can't seem to get it to work correct. Could someone point me to what I need to do? I have attached what I believe are the relevant parts. [globals] ; script to be executed when monitoring has been finished MONITOR_EXEC=/usr/local/bin/2wav2mp3 ; uncomment this line if you are using Ogg Vorbis

Jan 3 08:05:03 NOTICE[66269]: app_dial.c:1056 dial_exec_full: Unable to create channel of type 'SIP' (cause 3 - No route to destination) I end up getting this when I call from 2000 to 2001. 2000, 2002, and 2001 all exist in sip.conf and I connect using them. I have all three setup to use the from-sip context. Any suggestions on what is happening? [from-sip] exten =>

I am using asterisk along with freepbx . When recording is enabled for a extension the call record file made in /var/spool/asterisk/monitor contains information like OUT(extension number)-(timestamp)-(uniqueid).wav . This can be a big mess if there are more than 1000-2000 files in that folder and very hard to locate a call recording based on call time and extension number who dialled. I need to

On this macro I keep getting exited non-zero on s,3, but s,3 is doing what it is suppose to do but the macro stops. Is there a way to make a macro ignore errors and continue to s,4? I have the lattes ver of sox 12.17.4. Also if I just run this line from the command line I don't get an error. [root@redhat monitor]# sox in.wav in-rev.wav reverse [root@redhat monitor]# [macro-record-cleanup]

Hi all, I have the Asterisk set up and 2 softphone (Xlite) set up on two other PC. With the following configuration, I can use one softphone (2000) to call the other one (2001) and/or the voicemail at 2999. Here is my problem: 1. When I dial 9+nxxx-xxxx with one of the softphone to the PSTN via X100P card, I got busy tone. (i.e. I want to use the phone line which is connected to the

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Extensions No Problems Panasonic Ext -> SIP Extensions No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1]

I did a NoOp and see what the callerid was and when coming from the SIP Ext->Voip it is set to the Extension Number of the SIP Extension (as you would expect). When coming from the Panasonic the CallerID is blank, I tried setting it to nothing again, and I tried setting it to the callerid of the voip provider, a sip extension id, the extension number on the Panasonic side, the zap channel

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Ext No Problems Panasonic Ext -> SIP Ext No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1] Dial("SIP/610-097aee60",

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

Hi, I am having difficulty getting my record phone call dial-plan script working. I have tried the example record call scripts but they start recording before they are actually connected to an end point, e.g. you get ringing or announcements being recorded. It seems to me that these are bugs with the Dial() command: 1) Using M(x) in a dial command does not allow argument to be passed. Using

[apologies for no line wrap; config lines at bottom] I have mentioned on several threads here that the Monitor application doesn't do exactly what one would expect: the originating and answering legs of a call are unsynchronized by the duration of the interval that it takes for the answering leg to pick up the phone. This can be very distracting in a final mixed version of the file. Brian