similar to: FXO Gateway recommendation

Does anyone have any experience with the Audiocodes MP-108 FXO gateway? I'm looking to get one for incoming PSTN lines. In particular, does it pass caller ID information to Asterisk? I currently have a Mediatrix 1204 but Caller ID does not work, even though the specs say it does. All it sends are the names of the ports set up internally on the gateway (ie. "pstnline1" etc) when

I bought a couple of Mediatrix 1204's a few of months back. (Perceived advantages were relatively low overall cost and size per port, and it isn't nearly as vibration sensitive as a PC would be.) Rich Adamson's review from Feb 1 is comprehensive, and the only thing I'd like to add is this: One "feature" of these units that absolutely infuriates me is its behavior for

I'm currently looking to deploy an Asterisk server using an FXO media gateway to connect to the PSTN and was looking for any user experiences that may aid in selecting a gateway. Specifically i'm looking for a 4-port model under 500 dollars. Within this category exists: MediaTrix 1204 Grandstream GXW-4104 AudioCodes MP114 I've read over Voip-info.org regarding these products and

Hello, Just want to tap the collective wisdom of this list as to experiences pertaining to the Handytone HT488 and the Sipura SPA-3000 adapters... Basically I'm looking for a FXO/FXS/LAN ATA and these two seems to be the top of the pick..Any comments and experiences esp. with Asterisk compatibility would be great, before I plonk in the bucks. TIA. /wai-sun

My current config: pstn -> audiocodes fxo gateway -> asterisk -> xlite every fxo ports are registered with asterisk I have this extensions.conf exten => 111,1,answer exten => 111,n,dial(sip/fxo1) exten => 111,n,hangup If we dial 111 by xlite, I could hear pstn dialing tone. I could key in a phone no and connect to the called party. this is a two stage

Is anyone on the list using an Audiocodes gateway with asterisk and SIP? I'm looking at that platform, but I have a couple of issues: 1) Echo cancellation. The echo that I'm hearing with an X100P is unacceptable. Does the Audiocodes do better? 2) Line signalling. I'm using Kewlstart with the X100P, but it looks like the audiocodes uses loopstart only. How does this work with

Hello, I'm helping a colleague (*) which has the following setup: ITSP --- <T.38 capable PJSIP trunk> --- Asterisk 13 --- <PJSIP>-- Audiocodes MP-112 --- <FXO/FXS> --- Fax machine My issue is the following : Audiocodes gateway reject INVITEs with 488 Not Acceptable Here It seems this gateway requires t38 settings to be present in SDP body in the very first INVITE. My

Is anyone out there using an "AudioCodes MP108 8-Port FXO Analog Gateway (SIP)" with asterisk to support both inbound and outbound calling? If so, I'm interested to hear how it works, and I'd love to see some example confs (both in sip.conf and on the MP108). This product has been recommended to me by a SNOM/Asterisk-friendly distributor, but I would like a second opinion

Is the Sipura 3000 the only way to interface a remote pstn line and connect incoming calls to Asterisk? I have a location connected by network that has a phone line, when the room is occupied I want the line ti ring there as normal, but when the employee is travelling I want the line to be conencted to a ATA that then feeds it as an incoming pstn line to the pbx located at my office so it can

I've MP-114 that is working configured and working OK with my Asterisk but I just obtained MP-112 (2xFXS) and I can register OK with asterisk but I can only dial 3-digit extension. Anything longer than 3-digits is cut off, example I dial extension 1000: [Apr 29 10:03:30] NOTICE[3817][C-000000e9]: chan_sip.c:25902 handle_request_invite: Call from '54' (10.0.0.115:5060) to extension

I've Audiocodes MP-114 registered per-endpoint (2x FXO / 2x FXS) but when call comes on pstn-4444 it goes to context "fax-incoming" in sip.conf: [pstn-4444] type=friend context=incoming ... [pstn-9998] type=friend context=fax-incoming ... the device register per end point just fine, so it can find "secret=xxx" correctly but why the call is not forwarded to correct

I am trying to configure the FXO port on a Sipura-3000 for use with Asterisk. When I connect to the Sipura to dial out on the PSTN line connected to the Sipura's FXO port, it gives me the dialtone of the PSTN line and then I can hear the DTMF for the number I dialled beforehand. It does work but the customer perceives this delayed second DTMF feedback as "unprofessional" and the

I was able to setup AudioCodes MP-114 to rote calls form FOX to Asterisk and make internal calls: Routing Tables -> Tel to IP Routing: *, *, 10.0.0.109 (my asterisk IP) But I'm not sure how to setup AuioCodes to make calls out via FXO? In extensions.conf [Globals] pstn-5665=10.0.0.157 Whenever, I try to call out I get a busy signal. -- Joseph

Does anyone have a Sipura 3k running, and using the FXO? I've got things working right, but if I try to toss a *67 in the dialplan, it seems the sipura is throwing a 403 forbidden back. For example: exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/${EXTEN:1} works fine exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/*67${EXTEN:1} does not (even if I toss a couple Ws in) I can't

Ok, I am back from my thanksgiving holiday, and I find there was a big snow storm here in Seattle. Apparently during the storm there where multiple brown out/black outs. I have struggled since day one to get a high quality PSTN gateway configured with my very long loop and Mac based asterisk. I originally tried the HT-488, which had multiple issues, and was unacceptable. I then purchased

I'm currently looking to interconnect my Asterisk PBX system with the PSTN via a digital PRI/T1. I know a multitude of options exist for internal PCI cards (Digium/Sangoma/Rhino), I was wondering if anyone has any experience or recommendations of external PRI media gateways that support SIP. So far I've found: VegaStream Vega 400 Audiocodes Mediant 2000 MediaTrix 1531 However they are

Hi, I have a spiffy new gateway which seems quite promising. It's the Audiocodes MP114 FXS_FXO (2 of each). I have got it configured and working reasonably well, but have a couple of issues. 1) Asterisk 1.2.13 voicemail seems to be hung up on by the gateway after 10 seconds. This isn't asterisk saying it's quiet for 10 seconds, it's the gateway deciding it's time to go

Hi i have buy a Audiocode Median 2000 VoIP Gateway and connect it on : 1 E1 30 channels 1 Lan Port Anyone use this equipements with asterisk ? because i am search a config sample for AudioCode and for Asterisk (i am new in VoIP). I want that all calls arrives on the AudioCode are sent to the asterisk by SIP (trunk ?) and all outgoing call from Asterisk are sent to the AudioCode. I

I am looking to build a small PBX for an office that has 3 incoming analog lines and less than 10 extensions. For the Asterisk server I am going to use a small form factor PC with no-PCI slots so the FXO interface needs to be either FXO->SIP or USB. Can anyone make suggestions? I am looking at an AudioCodes MP114 FXO or possibly two Sangoma U100's but don't have experience with

I'm proposing an asterisk configuration and considering the use of multiport SIP/FXS gateways (instead of T1 cards and channel banks). I'm looking for products similar in function to the Cisco ATA-186, but with more ports. I've seen the manufacturer's web pages for the Audiocodes MediaPack (http://www.audiocodes.com/) and the Mediatrix (http://www.mediatrix.com/) access devices.