similar to: Transfer differences between BudgeTone101 and Snom190

Hello, We found out that after upgrading the firmware in our GrandStream BudgeTone phones, that we were not able to transfer calls anymore. We use the BT's own tranfering mechanisme. We can dial the phone where the call should be tranfered to. But after that, the original caller stays in music on hold on the server and there's no way to get the calling channel back again (not to the

Hello all, First of all, let me apologize about the length of this message, but I suppose it was necessary to include the details. I've spent quite some time already trying to get the call transfer function to work on my Asterisk installation. Let me first describe the general situation of the setup I am using, so you might be able to pinpoint the cause of the problem. I'm currently

I need to determine the state of extensions/port based on active channels on my asterisk. For SIP and AIX extensions this is not a real problem because the channel names they create relate to the SIP/AIX extensions (just strip the '-' sign and anything after). For ISDN extensions addressed by Zap, it turned out problematic. As I figured out there'se no direct relation between a

Hi, I have searched and searched, but cannot identify what is happening here... I have several snom190 phones, and all of them have the 5th function key set to call "asterisk" by using the "destination" option. This automatically causes the phone to SUBSCRIBE for NOTIFY messages for the "asterisk" destimation. Asterisk does not seem to like the SUBSCRIBE requests.

Hi guys/girls, We are running a TDM04B card with Asterisk in a Linux box that has 15 GrandStream102 extensions and 1 SNOM190 phone which we are using as an operator console. The FXO ports in the TDM04B are plugged directly into our telecoms provider's analogue lines. Something I've picked up with the SNOM is that sometimes when there are two active incoming calls via Zap channels they end

Hi guys/girls, We are running a TDM04B card with Asterisk in a Linux box that has 15 GS102 extensions and 1 SNOM190 phone which we are using as an operator console. The FXO ports in the TDM04B are plugged directly into our telecoms provider's analogue lines. Something I've picked up with the SNOM is that sometimes when there are two active incoming calls via Zap channels and the first

Hi All... I'm trying to get the intercom feature working on some snom 190 phones but having no luck... As you can see from the SIP trace below (from the called phone), intercom=true is being appended to the To: header as per requirements. I've email'd snom a few days ago but have yet to get a response. On my 190s, im running snom190-SIP 3.57v. I am pulling the config for the

Yea, True. No sweat. Should be better now ? :-) Kindest regards David Wilson _______________________________ D c D a t a Tel +27 33 342 7003 Fax +27 33 345 4155 Cell +27 82 4147413 http://www.dcdata.co.za support@dcdata.co.za Powered by Linux, driven by passion ! _______________________________ "Computers are not intelligent. They only think they are." ----- Original Message -----

BUG/SYMPTOMS: 1.Under certain circumstances, octoBRI (and most likely quadBRI) ISDN cards (Junghanns/CologneChip) severely distort certain ISDN payload. 2.Although these claims relate to the bristuff patch, the problem might not be limited to bristuff and in fact be rather asterisk/zaptel/libpri related. 3.Signal distortion is limited to the use of the CVS version of the Bristuff patch for

Hi, I am sorry to be asking this but the wiki is down and has been for a couple of days and I need to get this working before Monday to get my live system setup. Trying to get the Snom 190's and soon to arrive 3com 3102's to use the function keys and for the life of me I can't work it out from the conversations on the archive what I am going exactly wrong here? The snom 190 with

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

Anyone know how I can push a firmware update to a Snom 190 without using DHCP? In the web interface, I specify a path to the Snom firmware, and it works, except I have to physically press OK to get the update to download. I need to do it remotely...

Hi, I am using SNOM phones with Asterisks for few years. They used go occasionaly NR, and I would reregister them from the phone web interface. But it started doing frequently for last few months. Here are SNOM Phone and the firmware version; snom190-SIP - Version-Code: snom190-SIP 3.56m snom320-SIP - snom320 jffs2 v3.36 snom300-SIP - snom300-SIP 6.5.2 Asterisk version - Asterisk

101's for 68.00 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3042066051&category=11175 102's for 79.95 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3042066389&category=11175 Just passing what I find along.... bkw

Hi all, Just wondering if anyone's come across this issue, and what might be a fix for it: We've got several BT-101's deployed, and upgraded to firmware v.1.0.5.16. The phone can do proper supervised transfer, but _only_ once. If the user attempts to transfer a second time, it won't work. any suggestions/hints/tips are welcome.. Flynn

Hi all, Just a little note for the records and archives. We see many small glitches / troubles in the mailing-list but rarely success stories ... Here's one : Asterisk is running perfectly fine in our setup : Debian 3.0 stable / Athlon 1.8, 256 MB Ram / Digium E-100P / Swisscom PRI isdn We have 6 companies (more to come) sharing the system in the building with a total of about 20

Hi all, I got a couple of Snom 190's through this week and after some initial foolishness I have them both setup no problems. But here comes the except. When there is voicemail waiting the softbutton appears but the phone always dials its own extension. No matter what I put into the "mailbox" parameter on the line settings. (Phone registers correctly with * and all standard

Hi All, I realise this is off topic, but its likely the best place to ask! I sent an email to snom support a few days ago but have yet to recieve a response.. Perhaps some one has found a solution to this problem already? I've searched the mailing lists and google and found nothing useful. I've also read Snom's mass deployment documentation but thats no real help in this case.

We are running * 1.0 and have 6 snom 200's and one snom 220. the line hints work until I issue a reload command and then the snom hints stop working. I can re-create this scenario on 2 systems and with snom 190's also. is there a way to fix this? the only solution I can come up with is to reboot the phones. Thanks in advance, Justin

I have a 12 channel PRI with SNOM 190's and asterisk CVS from January. Most calls are fine, all incoming calls are fine, but I am getting echo on a significant number of outgoing calls. The person on the other side hears a perfect call, but the SIPphone side gets to hear themselves. It happens 100% of the time to some numbers (outgoing only), and only sporadically to others. Has anyone