similar to: Re: chan_sccp / 7960: reproduceable semi-lockup

Say there! This is a new Asterisk install on Fedora; I downloaded and installed Asterisk 1.2.1 and it runs fine. I downloaded the 20051217 version of chan_sccp, compiled and it installs ok. When I start Asterisk, it dies on startup at the activation/recognition of the chan_sccp module... A snippit from the startup: Asterisk Dynamic Loader Starting: [res_musiconhold.so] => (Music On Hold

Ok, so multiple people have said that hinting is possible with chan_sccp on the 7940/7960's and such, has anyone got this working? How do you go about getting this to work? I'd use the wiki, but it's link to the mailing list topic on that doesn't work anymore :( -- Aaron Daniel Computer Systems Technician Sam Houston State University amdtech@shsu.edu (936) 294-4198

Does anyone have a good resource to learn how to program the soft and hard buttons on a Cisco 7940 or 7960 phone? Using SIP Firmware...thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060303/e5e63834/attachment.htm

>Does the CVS has the 7910 support as well ? >If you want I can test it on asterisk/OpenBSD. > > yes it's supported. I can't really get it to work right 'cause I just have ciscos 7960/7905. Can anyone donate 7910/7920/7970? I will make them work just like they work in CCM, otherwise I will send them back :-) Sergio

Hi, as noone out there seems to be able to maintain chan_sccp, i'm trying to switch to chan_skinny. With the newest 1.4 svn the Softkeys are mostly wrong/non functional. I see Redial NewCall CFwdAll more (more) CFwdBu... GPickUp Confrn more NewCall works, CFwdAll seems to toggle DnD, the rest of the buttons do notting. Any ideas how to fix this? Regards, Andreas

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and load chan_sccp.so work. It does reload the config when asterisk is running) - socket

Any one knows where to install chan_sccp for asterisk 1.4 ???????. Please guide me from where can I download the asterisk 1.4 sccp channel driver and how to install it because I tried to get chan_sccp-mayday05.tar.gz When I trying to install it ,error happened like this. Please help me how to solve this issue. [root@XPL t]# cd chan_sccp [root@XPL chan_sccp]# make clean rm -rf

Hey all, I'm running * (1.0.9) with some 7960's. When I pick up the handset it often will flap on and off hook eventually hanging up on me and not realizing that I am still holding the handset. These phones are running with the SIP 7.5.0 image on a LAN (no NAT). I am not sure if this is a phone issue or an Asterisk setting. Ideas?

Does anyone know if the 7912G (which the wiki says can do either sccp or sip) uses the 7940/60 sip firmware? I ask this because the only firmware I can seem to find on TAC for the 7912G is sccp, no sip...if it takes it's own firmware and doesn't use 7940/60 firmware, can someone point me to the right location for it? Thanks, Marty Mastera M3 Resources marty@m3resources.com Phone:

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

I've added lines like this: speeddial = 123,test speeddial = 260,Bob in the [device] section for my 7921, but the speed dials do NOT appear on the menu (click right from the main screen). Am I missing something obvious here? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi folks. I attempting to set up a Cisco 7960 (SIP) so that if the user is on a call, other incoming calls will ring through to her phone and can be answered. So far I have only been able to get this working by using the call-waiting function, which is cumbersome and does not properly allow the first call to be retreived. Is there a better way to do this? Thanks in advance. John Mensel

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3

> Sergio schrieb: > >>> pressing the "End call" softkey while in call produces the message >>> "That key is not active here". Do I have to configure something >>> special for that to work or is it just not yet implemented? >> >> you can quick apply this patch >> > Ah, great... Thanks! > You don't accidentally have a

On Sat, May 28, 2005 at 01:51:56AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > I'm trying the latest mayday chan_sccp and found it difficult to have > more than three speeddials. I have defined only one line but can't get > more than three SDs. On console, * says > > May 28 01:44:12 ERROR[26933]: sccp_actions.c:252 >

> > When dialling a number, my 7960 always says "External call". Is there > any chance to tell it the difference or make it display the dialled > number (especially nice when using speeddials)? > CallInfoMessage issue, it should be fixed by Jan in the CVS, I will check it out > Is there any way with chan_sccp to have asterisk taking influence on the >

All, I have AAH 1.0 installed using Digium TDM04B and Grandstream GXP2000 phones. All seems well other than the phones have to be reset up to 5 times per day. It is like they lose thier ip connection or maybe thier SIP connection. Has anyone else experienced this issue? I have the phones set for static IP addresses and that doesnt seem to help either. Any help would be greatly

I?ve read various stories about the Asterisk SCCP implementation. Some say it works fine, others say it doesn?t ? stick with a SIP phone! My dilemma is that I?d like a WI-FI phone with multi-line capability, and so far Ciscos 7920 is the only one I?ve found. The disadvantage is that it cannot be upgraded to support the SIP-protocol, so if I purchase such a phone I am stuck with the SCCP.

Heya list, I need some advice/experience. Some of our customers are asking us about DECT solutions for their asterisk install. Some others will not go to asterisk if there won't be a DECT solution. They now have a Siemens or a Samsung PBX. Those PBX-es come with a DECT basestation and optionally repeaters etc. All those basestations speak some own protocol to the PBX, so we cannot use them

hi All, Sorry to repost but................ I have a server setup that runs sip no problem. I want to try a cisco phone. how do I a) Tell if I have skinny support loaded b) Load it onto a debian system Many thanks