similar to: chan_sccp patches

Hello list, Has anyone on list had experience with getting the 7914 module working with Asterisk, probably using the chan-sccp drivers? I have 7912 and 7940 phones working OK, I need something for reception, and I was thinking a 7960 with two of these modules would handle it, but need to know that someone has got it working somewhere (seeing lines that are free, busy etc) Mikel

Hello I need someone to install Chan_SCCP for me and get it working on Elastix with Cisco 7937 Interested party please msn me on sam__tam AT hotmail DOT com or email me back -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090207/58b10073/attachment.htm

Hi all, we are happy to announce the new test-release of chan_sccp. The Cisco 7920 support is working now, however, some call handling stuff is hardcoded for testing. Also some more in-deep-knowledge of Skinny was archieved, how they handle calls. Please test it with your 7940/7960 and 30VIP and report any problems using our bug tracking tool. The latest tarball is available at:

Greetings, I have seen a few postings in the past regarding the interop of Asterisk and the Cisco 7920 WiFi phone. To date, I have not seen a definitive method to getting the phone working. Assuming someone has this actually working, can that person step up and answer these questions. 1) What Channel is it working with (chan_skinny or chan_sccp)? 2) If code was used that is not a part of a

Hello: Does anyone know how to configure any of the Cisco 79XX phones to get custom ringers when using chan_sccp with Asterisk? I've currently got Asterisk's 05-24-04 CVS-HEAD and Zozo's 0.2 release of chan_sccp. I've tried using ringlist.dat, but that appears to only be for the SIP phones... Thanks for any input, Andrew

Dear sccp users :-) We are announcing the support of the Cisco 7935 Conference Station within the chap_sccp channel driver (experimental version) AND the "alpha-beta" stage of the 12SP+ Support. I will later on today add the information on the Wiki on how to get this phones correctly registered. However the support is still not fully functional (some issues), but please test this

Now that I am using the chan_sccp module, the phones now work as single line phones. However, these phones have support for multiple lines. So I setup phone1 with extension 1001, and phone2 with exts 1002 and 1003. If I call ext 1003 from 1001, phone2 rings correctly and if I pickup the handset on phone2 I can carry on the conversation. If I call ext 1002 from 1001, phone2 rings as it should

Hello folks, I'm trying to install chan_sccp and get this error [chan_sccp.so]Oct 2 00:28:06 WARNING[-151090528]: loader.c:248 ast_load_resource: /usr/lib/asterisk/modules/chan_sccp.so: undefined symbol: __use_ast_pthread_create_instead__ Oct 2 00:28:06 WARNING[-151090528]: loader.c:429 load_modules: Loading module chan_sccp.so failed! After this, mpg123 goes crazy and shoots my

Hi list! I'm still trying to figure out why my cisco 7940 compatible phone is not working with chan_sccp at all while it works partly with skinny. Is there any way to verify is chan_sccp compiled correctly and if it's behaving like it should? Can I telnet to the skinny port and simulate a 'login' and authentication of a device? Thanks for any leads! Remco

I grabbed the 7920 tarball available from the sourceforge site dated sometime in Oct. I've got my 7920 working, however, asterisk seems to stop talking to it sometimes and requires a restart (like kill asterisk completely and restart it). Does anyone know if a new version is on the way? Does the current CVS fix this? Otherwise, the phone works great. Battery life sucks though. :(

I am using chan_sccp on bristuffed asterisk (0.2RC3 on asterisk 1.0.3). Things seem fine but I am seeing some weird stuff. I have a Kirk IP600 connecting to * with 2 handsets. The weird thing is that for incoming calls the handset that is put second as my dialstring, never rings. This is my dial string: exten => 666666666,4,Dial(${PHONE1}&${DECT1}&${DECT2}),25,tm) Where DECT1

Just wondering, I noticed on the chan_sccp site that a new release should have been released on 20-Jan-2005. Is there any news on the status of this release? As far as I can tell even the sourceforge CVS for chan_sccp didn't change much around that time - or since. -Chris

On Sat, May 28, 2005 at 01:51:56AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > I'm trying the latest mayday chan_sccp and found it difficult to have > more than three speeddials. I have defined only one line but can't get > more than three SDs. On console, * says > > May 28 01:44:12 ERROR[26933]: sccp_actions.c:252 >

I am impressed, I have been trying this for sometime using the SIP image and the only difference I can create is a 'single' and a 'double' ring on the phone. I use the 'single' ring for phone calls and the 'double' ring for the doorbell. I would love to be able to choose a ring tone based on the incoming msn or callerID. The idea of the phone shouting 'Its the

> Sergio schrieb: > >>> pressing the "End call" softkey while in call produces the message >>> "That key is not active here". Do I have to configure something >>> special for that to work or is it just not yet implemented? >> >> you can quick apply this patch >> > Ah, great... Thanks! > You don't accidentally have a

> I encountered a semi-lockup situation with chan_sccp and a 7960 when > switching between calls. It's kinda reproduceable - When holding, > resuming, holding, resuming between two calls on a line, one of the > calls become kinda zombie. The phone enters a state where the call is > signalled active but no softkey is there. Already fixed in the CVS Sergio

>Does the CVS has the 7910 support as well ? >If you want I can test it on asterisk/OpenBSD. > > yes it's supported. I can't really get it to work right 'cause I just have ciscos 7960/7905. Can anyone donate 7910/7920/7970? I will make them work just like they work in CCM, otherwise I will send them back :-) Sergio

On Sat, Jun 04, 2005 at 10:09:29AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > there are some 3rd party patches available for chan_sccp which add a > feature and fix a few problems: > > http://www.sineapps.com/news.php?rssid=726 > > sccp_cli.c.diff <http://www.newace.com/asterisk/sccp_cli.c.diff> > Adds support for

> > When dialling a number, my 7960 always says "External call". Is there > any chance to tell it the difference or make it display the dialled > number (especially nice when using speeddials)? > CallInfoMessage issue, it should be fixed by Jan in the CVS, I will check it out > Is there any way with chan_sccp to have asterisk taking influence on the >

When sending a call to a line defined on chan_sccp, there is an error on the console that says: Jun 7 08:22:29 WARNING[3924]: sccp_channel.c:79 sccp_channel_send_callinfo: Incoming call SCCP/Line1-00000008 doesn't have CallerId name Is this because of the changes in the callerid name from stable to head? Or does someone know of a way to correct this? -- respectfully, Joseph