similar to: Asterisk@home rejecting nufone incoming calls (iax2)

I've been using NuFone with Asterisk for a while, but I've started seeing this error with incoming calls: NOTICE[114696]: File chan_iax2.c, Line 4581 (socket_read): Rejected connect attempt from 216.234.116.189, requested/capability 0x4/0x4 incompatible with our capability 0xff03. Outgoing works just fine, but I can't get incoming to work at all. Any ideas? I googled for the

Well I know from personal experience that NuFone is working on a solution for its customers as fast as it can. I know they found an alternate termination provider and are working to have a solution for the TF and Local DID's he currently has on his platform. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Good evening, I just signed up with Nufone and I am able to receive calls with no problem via my 800 number. Outgoing calls are not going through though. My extensions.conf is as follows: [nufone-out] exten => _91NXXNXXXXXX,1,SetCallerID(mynumber) exten => _91NXXNXXXXXX,2,Dial(IAX2/user:pass@switch-2.nufone.net/${EXTEN:1}) exten => _91NXXNXXXXXX,3,Congestion Whenever I try to

Hi, I've been using nufone DIDs for months with no problem. Now there are codec problems that prevent any kind of calls working. For example, May 5 13:04:12 WARNING[928]: channel.c:2115 ast_channel_make_compatible: No path to translate from IAX2/NuFone@NuFone/25(256) to SIP/wengo-out-968a(4) May 5 13:04:12 WARNING[928]: app_dial.c:1006 dial_exec: Had to drop call because I couldn't

> -----Original Message----- > From: Asterisk@gtcus.com [mailto:Asterisk@gtcus.com] > Sent: Saturday, September 06, 2003 8:39 AM > To: asterisk-users@lists.digium.com > Subject: RE: [Asterisk-Users] VONAGE or IP Dialtone > > > Thanks for the great feedback on these options. I am fairly > new at this and not familiar with the IAX/IAX2 capabilities > offered by

Well this is disappointing. Time to find somebody else... -- Wes -----Original Message----- From: NuFone Operations [mailto:support@nufone.net] Sent: Tuesday, April 18, 2006 3:44 PM To: wbaehr@totalmac.net Subject: NuFone Update: DIDs Effective 3pm EST Today, April 18th, 2006 Telesthetic, the carrier supporting the Toll-Free and Michigan DID operations of NuFone, has threatened to terminate

I tested SpanDSP as an internal extension, and it worked like a charm. Now I am trying to receive faxes from a toll-free nufone DID. I am running g.711uLaw in on this line, so no to cause too many problems. However I receive the following errors after the fax is finished receiving: so the fax comes in Executing RxFAX("IAX2[NuFone@198.22.67.70:4569]/5",

I have two DIDs from NuFone. I have for the first DID a short extension (601 = 3 digits) and on the other one a long extension (886212345678 =12 digits) Extensions.conf looks like: [fromNuFone] exten => 888xxxxxxx,1,Dial(SIP/601,20,tr) exten => 888xxxxxxx,2,Dial(SIP/602,20,tr) exten => 888xxxxxxx,3,hangup ; ; exten => 866xxxxxxx,1,Dial(SIP/886212345678,60,tr) exten =>

Went to their site today. Site claims they are still in biz. What is the story? What really happened to Nufone anyway?

Anyone know how many simultaneous calls you can receive on a NuFone DID? -Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050310/e20d2eb8/attachment.htm

Hello everybody, This is a problem disturb me for long. I run asterisk Asterisk 1.4.14 and A2Billing 1.3 in the same Debian 4.0 ETCH server. And there is also FoneBridge for TDM over Ethernet with E1 to make as well as receive calls from mobiles or PSTN. And IAX2 trunk runs between Asterisk and A2Billing. For most of the time they really do a good job. But some hours or days later----I mean it

Hi folks You are welcome to try our (Xorcom)'s latest debs (for Xorcom Rapid, or Debian Sarge in general) "Unstable": Asterisk and AMPortal: The repository is available at: deb http://rapid.dotsrc.org/ unstable/ #deb-src http://rapid.dotsrc.org/ unstable/ The commands you are looking for are: apt-get update apt-get dist-upgrade apt-get install amportal

Hi Here is part of my extensions.conf exten => 8661231234,1,agi,dtmf.php When I dial this number, this is what I see in my asterisk console: -- Accepting AUTHENTICATED call from 198.22.67.70: > requested format = gsm, > requested prefs = (), > actual format = gsm, > host prefs = (gsm|ilbc|speex), > priority = mine -- Executing

Hi, I have a nufone connection (IAX2), works fine. In my iax.conf I do not specify a time interval that * needs to renew registrations with nufone server. However I can see following registration messages on my cli every 90 seconds (approximately) --Registered to '198.22.67.70', who sees us as 69.5X.XXX.XXX:4569 --Registered to '198.22.67.70', who sees us as 69.5X.XXX.XXX:4569

Hi!I've installed Asterisk@home and I have a ISDN card,(Cologne Chip Design GmbH ISDN network controller [HFC-PCI](rev 0.2) This is how I installed bristuff: how to install hfc card after unload asterisk and amportal whit amportal stop type "setup" unselect zaptel in system service... and set the lan --->reboot<--- cd /usr/src wget

Hi to all, I use FreePBX version 2.7.0.2 with dahdi. The first problem is with dahdi: At the system startup i can't find a way to start correctly Asterisk with Dahdi. My boot configuration is the following: /etc/rc.d/after.local /usr/sbin/rcdahdi start & sleep 15 /usr/local/sbin/amportal start & /sbin/route add -host 85.38.234.9 gw 192.168.2.1 & /usr/bin/python

Is anyone else having trouble dialing 800 numbers through Nufone? I'm getting the SIT tones no matter what number I dial. Normal long distance works fine. I don't think it's my dial plan (it was working previously).

Hi!I've this problem to another asterisk@home machine, without digium cards, but only with a bri isdn card.It doesn't connect in the amportal graphical,(it's stopped), if I make tha amportal start command this is the result: STARTING ASTERISK Asterisk ended with exit status 1 Asterisk died with code 1. Automatically restarting Asterisk. Asterisk ended with exit status 1 Asterisk died

Greetings. I am trying to get AMP up and going on my Asterisk server. I can access the admin pages on my asterisk server via a web browser. I can add and edit things via the web browser and it edits the database accordingly. Everything seems fine except when I try to run 'amportal start'. Below is what I get (Plus tail /var/log/asterisk/full, but the tail of the 'full' log

I have ASTCC installed, and compare it with NuFone, however, I find that the billing of NuFone is always a few secondes more (6 to 24 seconds) Does anybody has an explanation / solution for it? bye Ronald