similar to: Cisco 7960 tftp "not null terminated"

I'm trying to setup a couple of Cisco 7960's in asterisk. I have asterisk working fine for sip clients, and can call the 7960's just fine, but I can't seem to dial out on them. As soon as I enter the first digit, the phone attempts to dial it without waiting for the rest. I've changed timeout settings, etc but can't seem to get it to work. Any ideas? Asterisk

Hi All, I'm thinking of creating a new asterisk server using the latest 1.4 stable release to replace my ageing Asterisk SVN-branch-1.2-r7231 (its been a while!). My only concern - my phones are Cisco 7960's (with sccp firmware 7.2 loaded) and to support them better, I remember compiling in a skinny(?) driver to replace the (from what I could tell) basic in built sccp support. After

I have some Cisco 7960's and want to use them with SCCP - I have gotten it working with a few different firmware versions but all seem a little flakey. I know that SCCP is not as solid as SIP but am wondering, which firmware version is advised for use with chan_sccp from http://chan-sccp.sourceforge.net/ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, Does anyone have any experience getting a 7936 to work with Asterisk? Do you need to use SCCP or is there a SIP image for the phone? I have a few 7960G's and they are working with SIP, just curious if the config of the conference phone is the same and if anybody has any good setup links. Thanks! NB -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, An Cisco 7960 ipphone has been set to SCCP firmware by one of our students. I want to set it to 7.5 SIP firmware and I've been unsuccessful yet. Firmware versions are SCCP 3.0 (Source: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/mgcp/frmwrup.htm#wp1045789) ie: Application Load P003F300 Boot Load ID PC030300 When I browse, phone settings, I see

I'm having a wierd problem with a Cisco 7960 (sccp2) and asterisk (1.4.2) If the call that I'm trying to make goes through, everything works fine. But if there's any sort of error (like me messing around in my extensions.conf, etc). I can't get the connection to drop. ie: If I get the conjestion tone and hang up the phone, I can do a sccp show channels I can see that the

Maybe not the place for this but thought I'd post the info for others. I purchased a cisco 7960 off ebay and needed to convert to SIP for *. I know * supports SCCP but I wont go into that here. I'd read on voip-info.org that a contract could be purchased for approx $8 to allow me to download the firmware. I though, being in the UK, i'd get one through a reseller in the UK.

What is involved in getting SIP firmware into a Cisco 7960 with sccp installed? Expensive image from Cisco? Plated in unobtanium? joe a.

Hello, I'm considering using Asterisk with some type of Cisco phone, and currently considering either the 7940 or 7960 because of its more-complete functionality (compared to the 7905). I'm currently wondering: Do all the expected functions (transfer, conference, voice mail, message waiting indicator, etc.) work normally with Asterisk over SIP? What caveats are known about using

I found a few mentions of the 7914 being used with Asterisk, these all covered SCCP/skinny though. Does anyone know if the 7914 can even be used with SIP? If so, any pointers? Is it a services thing? Anyone get the operator (line/extension status) to work with it. Thanks for the help, Cisco doesn't even mention ANYTHING about SIP + the 7914. Matt

I couldn't figure it out on my own. I tried to purchase a Smartnet for the phone, but the original 7960 is not supported. Is it technically possible and if so, what would it cost me to have someone remote into my network and upgrade my SCCP 7960 to the latest SIP firmware? ---------- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part --------------

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

The documentation of how to use the 79xx series' phones and features with Asterisk is really hard to find and put together. The higher end phones like 7970 are more like converged PC+phone, a thin client to telephony and network apps. But it's really hard to target it as a development and deployment platform because the docs and techniques are so obscure. There seems to be a fair amount

Yes, but the 7970 relies on the very latest SCCP protocol version which was introduced with Call Manager 4.0. As far as I know the SCCP module for Asterisk doesn't support the latest SCCP version so I don't think it will work. The 7960 works with the older versions of SCCP. I have yet to hear of anyone getting the 7970 to work with *. If someone has please update the list with

Hi ! On Cisco 7960 (with or without 7914 add-on module) when I press speakerphone button (or select line with line button - which automatically put second line on speakerphone) after about 15-20 seconds of dialtone Asterisk stable dies (seg fault). Tested versions of Asterisk are 1.0.2, 1.0.3 or 1.0.5, chan_sccp is newest form CVS of chann-sccp.sourceforge.net ). Firmware of 7960 is

Hello All, I just picked up 10 new 7960G's and having a hardtime upgrading the firmware on them. We already have 30 or 40 of these phones in production. Typically when I get a new phone, I just plug it into the voice vlan and it auto grades to the firmware in OS79XX.txt. Now whats happening is im getting a weird error during the reading of that file. Here's the output from the TFTP

Interesting notes on the 79xx series. The 7920 is the wireless phone; not mentioned here. For a more complete guide to Cisco's phones, see: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheets_list.html The 7902 is the "very inexpensive" Cisco phone, and it looks like it will be SCCP (Skinny) only. Twiddling my thumbs here waiting for the chan_sccp to

I recently upgraded a Cisco 7960 to the SIP firmware, it worked fine without a "call-manager". I just put the SIP firmware and associated config files in the TFTP directory of my asterisk server so that the phone could pull the firmware off of my asterisk server via TFTP. It took me about 5 minutes maximum to get the phone working with SIP through asterisk. NO Call-manager was used in

Can anyone point me to info on how to change the functionality of the SIP (7.4) 7960's. We previously had an SCCP firmware on the phone and the users want the phone to work like it used too. Here are some examples: The users do not want to push the new call softkey or the speaker button in order to dial a call. They want to be able to just begin dialing the number. The users do not want

Indeed this might be the failing point... Unfortunately, because I have no Cisco CCO account anymore, I have no access to firmware... I will try to find a copy of an old firmware for these phones. If I can find one, I hope it fixes my problem. Thanks, Brad > Apologies in advance if this is a stupid comment, but don't you have to > convert to SIP at a much lower version than 8. I