similar to: Can't transfer calls on polycom 500 after new firmware upgrade

Ever since I upgraded my Polycom 500 to the newest sip.ld (kept the old bootrom), when I dial things like "*98" for voicemail, the screen shows "9*8" and doesn't dial my voicemail system! Is this user error, or errors in the new firmware? Chris Coulthurst chris@shuksan.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

When I try and park a call by transferring to 700, it audibly says to me "701", and then instead of hanging up with me, it puts me on hold. The only way to park the call is to send it blind to 700, but then I wouldn't know which parking spot the call is in! Before I send any .conf files to the list, does anyone recognize this behavior, and have a workaround? Chris Coulthurst

Get the new firmware - it's supposed to have changed the callerid display presentation to include name and number. _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chris Coulthurst Sent: Friday, May 20, 2005 1:19 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Displayed CallerID on

Does anyone know how to change the display format of caller id on the screen of a polycom 300/500/600? When I call FROM my 'shop phone 203' TO my 'office phone 201', a Polycom 500, it only says 'Shop' as the calling party. More specifically, the two lines look like this: Incoming call from: Shop I'm looking for a way to make it use both lines for caller id,

If you activate (via sip.cfg) the feature Group Call Pickup, its no surprise that asterisk doesn't know what to do with this feature request. But it is being sent as a SIP SUBSCRIBE request, and I'm wondering if, as asterisk stands, there is a way to take advantage of this feature to emulate the "*8#" normal behavior. If anyone has any input, there is also a call parking

If you activate (via sip.cfg) the feature Group Call Pickup, its no surprise that asterisk doesn't know what to do with this feature request. But it is being sent as a SIP SUBSCRIBE request, and I'm wondering if, as asterisk stands, there is a way to take advantage of this feature to emulate the "*8#" normal behavior. If anyone has any input, there is also a call parking

Can anyone explain the Polycom Text Messaging features built in to the IP 500/600? Can Asterisk (or something else) talk to it? I've seen vague references to MSN Messenger, and somehow that's mentally disturbing. Chris Coulthurst <mailto:chris@shuksan.com> chris@shuksan.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone know if there is any way to make the 'services' key do anything? How about a way to remap it? Chris Coulthurst chris@shuksan.com

I'm having a problem with the callerID that the polycom IP600 phones are displaying. I would like to modify the CIDName and leave CIDNumber as exactly what the phone call came in as(provided they aren't hiding callerID). Most of the calls will be going to the queue, but a few will go directly to the SIP phones. I've done a various combinations of using SetCallerID(),

This is a dialpaln issue. I solved the same problem recently. For 4 digit extensions you need to append the dialplan statement in the sip.cfg configuration file as follows <digitmap dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2 -9]xxxT|1xxxT" dialplan.digitmap.timeOut="3"/> Michael > I am not sure what I did but blind transfers do not

I'm attempting to set up my SoundPoint 501 with my Asterisk server. I've configured DHCP and TFTP and successfully updated both the BootRom and SIP application. I've also created a custom cfg file for this phone's MAC address and the settings seem to be taking just fine. I can see that the phone registers with my Asterisk server but 'sip show peers' reports that the phone

Does anyone have success in upgrading Aastra/Sayson 480i CT firmware? All I get, no matter what I've tried is "Unable to upgrade firmware". tftpd is working because the dialplan freshens, and I have aastra.cfg whatevermacaddressfile.cfg and firmware.st in /tftpboot Am I missing something stupid? Is there another way to upgrade it? Chris Coulthurst chris@shuksan.com

I have these phones working well with Asterisk, thanks to http://www.freedomphones.net/polycom/files The code there is not the most current (and my Polycom Extranet login hasn't gotten updated yet to allow downloads). Been waiting a while for their support folks to update the access. If you know where I can get the 2.5.0 BootROM and 1.3.1 SIP code? Thanks, L.

Received two new Polycom 500 phones. Dhcp and ftp configured properly to load the various files including v2.5.0 bootrom.ld, etc. One of the phones loaded all firmware and config files properly, registers with *, and is usable. The second phone loads bootrom.ld (from the same ftp server on the same wire as the phone), but towards the end of the bootrom.ld load process (about 430 pkts as seen by

I have a Polycom 500 and would love one of the line-appearance keys to show me if a certain person/people are on the phone upstairs. This 'hint' priority seems to have little-to-no documentation. So, if anyone out there has a clue about this, here are a couple of questions: Can you 'hint' Zap and IAX2 extensions? Can you concatenate extensions together? (i.e. exten =>

Hi folks, New to the list. Just updated the bootrom and app firmware on a Soundpoint IP 501 as per: http://www.voip-info.org/wiki-Polycom+Phones Updated from: to: APP 1.4.1.0040 1.5.2.0054 BootROM 2.6.1.0003 2.6.2.0032 After I did this, it appears that the Web interface for the phone won't change the settings, nor will it actually reboot the phone now. What do I

Did you try to boot without lan just the power ... I've had this same problem to and rebooted the device without lan connection -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Louis-David Mitterrand Sent: woensdag 26 januari 2005 11:36 To: 'Asterisk Users Mailing List - Non-Commercial Discussion'

Hello everyone, Please forgive the exclamation points but I have been battling this one off and on for about four days now. Sorry for the cross post. It all started with a box of IP 501s. I contacted my reseller and obtained the latest BootRom and SIP firmware. Unzipped, configured, copied over to my FTP server (running AstLinux, of course). The phone booted, so far so good. Updated

Hi - > I am not sure what I did but blind transfers do not work. The Polycom does > not allow me to dial the extension of the person I want to transfer to after > I hit: > > transfer -> blind I would strongly suggest getting the latest firmware, and using the sample configuration files with that firmware to set up your phone. This SHOULD work. If it still does not work

Hi Andrew - > On Monday 13 March 2006 10:20, Noah Miller wrote: >>> The transer button on the polycom phone does not seem to transfer/park >>> the call properly. I have to use the # -> 700 to park the call. >> >> If I recall, using the Polycom transfer, you have to make sure it is done >> as a blind transfer. The Polycom attended transfer