Displaying 20 results from an estimated 3000 matches similar to: "Can Ztdummy be used in production environment"
2005 Oct 12
5
delays with IAX2 and Meetme
Hi there
I am using IAX2 softphones dialing into meetme conferences. I also have
jitterbuffer=yes, with typical jitterbuffer settings. The problem I am
having is that as soon as there is a delay from a participant, then the
delay continues until the participant hangs up and dials in again. When
dialing in again the delay seems to go.
It seems to me as though as soon as the server registers
2005 May 16
4
IAX jitter
Hi there
I have a question regarding IAX jitter. I have 3 users on a LAN dialing into
a Meetme conference on an Asterisk box which is also hosted on the LAN. I
have set jitterbuffer = no and tos = lowdelay. Now, for 2 of the users the
audio is fine, but for the 3rd user there is intermittent break up in the
audio when they are receiving. I have had a look at "iax2 show channels" and
2005 Aug 02
1
Ztdummy or Zaptel card on production server
Hi there
I am currently using Asterisk with Meetme on a 2.4 linux kernel. I am using
Ztdummy with usb-uhci driver for timing. It seems to work ok, although I
haven't tried it with more than 5 users. However, I am now looking to move
into a production environment and some people have said that it is better to
have a Zaptel card. I would be installing Asterisk on a 2.6 linux kernel for
the
2005 May 30
2
choice of processors
Hi there
I am moving into a production environment. I will mostly be using Meetme,
with Ztdummy for timing. I have a question on which of 2 processor setups is
favourable.
I have the choice between Dual 2.8GHz Xeon Processors and a single Pentium 4
3.06GHz Processor. These will cost me exactly the same amount.
Would one of these processor setups be favourable, both in terms of
performance and
2006 Mar 22
3
router UDP timeout
Hi there
I am using an IAX2 softphone built from the IaxClient library dialing into
Meetme conferences. The IaxClient seems to use silence suppression, and not
sure if this can be disabled. The client works fine through most routers,
but for some it disconnects the client after about 5 minutes and gives this
error in the asterisk logs:
Chan_iax2.c:1480 attempt_transmit: Max retries exceeded to
2006 Feb 09
2
Meetme echo cancellation
Hi there
I am using IAX2 softphones dialing into a meetme conference. In my softphone
I was forcing uses to click on a button when they wanted to speak, enabling
their microphone and disabling their speakers. This way when a user was
speaking they did not hear their voice half a second later (because meetme
mixes the voice and sends to everyone in the conference).
Now because of requirements
2005 Aug 30
2
unresolved symbol when loading ztdummy
Hi!
When I try to load the ztdummy driver via "insmod ztdummy", I get the
following errors:
/lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_unregister
/lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_transmit
/lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_receive
/lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_register
I'm using zaptel-1.0.8 and
2008 Apr 03
6
ztdummy
What does it take to get ztdummy to work correctly?
I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel
1.4.9.2
Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs.
Problem is playback() does not work. So then I stop zaptel, asterisk
runs and playback() now
works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for
that.
I am
2005 Aug 28
7
ztdummy and Linux 2.6.13-rc7
Anybody having issues with ztdummy under the current 2.6 RC7? I get the
following errors when trying to modprobe ztdummy:
"Unable to register zaptel rtc driver"
Doing a Google on the error shows reference to a message from 2004 that
said you might not have RTC compiled into the kernel. Checking via:
cd /usr/src/linux-2.6.13-rc7
grep -i rtc .config
shows:
CONFIG_APM_RTC_IS_GMT=y
2007 Apr 23
2
ztdummy
I've compiled ztdummy, following the directions on
http://www.voip-info.org/wiki-Asterisk+timer+ztdummy, and when I try to
modprobe zt :
#modprobe ztdummy
FATAL: Error inserting ztdummy
(/lib/modules/2.6.18-gentoo-r6/misc/ztdummy.ko): Input/output error
FATAL: Error running install command for ztdummy
I haven't been able to find any info on what the I/O error might be or
how to
2005 Jun 03
1
ztdummy errors on WBEL4
zaptel compiles fine (make linux26) but when I modprobe ztdummy I get
the follow error.
[root@localhost zaptel]# modprobe ztdummy
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'
1 error(s) detected
FATAL: Error running install command for ztdummy
System info:
Linux localhost.localdomain 2.6.9-5.0.5.ELsmp #1 SMP Thu May 19 19:24:44
2006 Jan 16
2
ztdummy inaccuracy on linux-2.6
Hello,
I have some ugly numbers given by zttest for ztdummy on an AMD64 box
running linux-2.6.15 compiled for Athlon64.
linux-2.6.15, zaptel/branches/1.2 r900, jiffies
./zttest
Opened pseudo zap interface, measuring accuracy...
99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%
99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%
99.975586% 99.975586%
2005 Jul 04
0
MAKEing zaptel and ztdummy on SuSE 9.3 - Repost
Hi,
Sorry to re-post, but I'm still having hassles with ztdummy. I'm using
kernel 2.6.11.4-21.7-smp and Asterisk 1.0.8 on SuSE 9.3
The first 3 makes (see below) for zaptel work out ok - but the
ztdummy.ko (etc) files *are* created even though I haven't yet
uncommented ztdummy in Makefile.
If the ztdummy bits are compiled, why edit Makefile & run make again?
modprobe ztdummy
2006 Oct 20
2
modprobe Ztdummy is not working
Hi,
I've install zaptel and I don't have a Digium card installed in the machine.
So I want to install ztdummy to have Music On Hold working. I've follow
these instruction http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and
at the point "modprobe ztdummy" it's failing. I'm getting these messages:
root@dubic:~# modprobe ztdummy
FATAL: Error inserting ztdummy
2006 Feb 08
1
ztdummy on gentoo 2005.1
Hi i followed this instructions for installing ztdummy on a 2.6 kernel
(taken from
http://www.voip-info.org/wiki/index.php?page=Asterisk+timer+ztdummy
)
cd /usr/src/zaptel
* READ /usr/src/zaptel/README.udev and follow the steps
* check modules on: /etc/sysconfig/zaptel> if you have no digium
hardware comment out all modeules except ztdummy.
- make linux26
- make install
-
2007 Sep 13
2
ztdummy problem in fedora7, kernel 2.6.22.5-76.fc7
hi there
i am facing problem in installing the ztdummy module in fedora7,
2.6.22.5-76.fc7 is the version of the kernel. here are some logs for your
kind consideration,
i have tried varios solution from voip-info.org and many more, but in vain.
Message from "/var/log/messages"
Sep 13 14:27:14 localhost kernel: Zapata Telephony Interface Registered on
major
Sep 13 14:27:14 localhost
2005 Oct 13
2
ztdummy build problems
Hi all,
Trying to build ztdummy on an old redhat 7.3 box running kernel
2.4.20-43.7.legacysmp. Yes, I have the kernel sources installed. Yes,
I set them up with make oldconfig; make dep.
The build error is:
make ztdummy
gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__
-DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I.
-Wstrict-prototypes -fomit-frame-pointer -I/usr/src/
2004 May 09
2
ztdummy problem?!?
Hi,
ztdummy says the following:
VoiceBOX:/usr/src/zaptel# modprobe ztdummy
/lib/modules/2.4.18/misc/ztdummy.o: unresolved symbol zt_unregister
/lib/modules/2.4.18/misc/ztdummy.o: unresolved symbol zt_transmit
/lib/modules/2.4.18/misc/ztdummy.o: unresolved symbol zt_receive
/lib/modules/2.4.18/misc/ztdummy.o: unresolved symbol zt_register
/lib/modules/2.4.18/misc/ztdummy.o: insmod
2005 Feb 28
1
I can't load modules (ztdummy, wcfxo.o)
Hi to everybody,
seems that I cannot load the zaptel modules:
ztdummy says the following:
[root@Hayabusa misc]# modprobe ztdummy
/lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister
/lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit
/lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive
/lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register
2004 May 26
1
ztdummy with kernel 2.6
ztdummy successfully compiles under kernel 2.6, but when I load it I get
ztdummy: Unknown symbol fill_td
ztdummy: Unknown symbol insert_td_horizontal
ztdummy: Unknown symbol uhci_devices
ztdummy: Unknown symbol uhci_interrupt
ztdummy: Unknown symbol alloc_td
ztdummy: Unknown symbol unlink_td
ztdummy: Unknown symbol delete_desc
I had a quick look at the source, and it looks like these function