similar to: Cisco Config

I have a Cisco 7940G IP Phone. I am trying to load the firmware to SIP 3.2. The Phone just hangs in Defaulting CM to TFTP Server. It doesn't do anything else after that. I also have two other 7940g's that are the Universal Application Loader mode and say Protocol Application Invalid. I need to know what I can do to fix both these problems. I am running Asterisk@Home version 1.0. I have to

Anyone have experience with these guys? If so, good, bad, average? http://www.junctionnetworks.com Thanks, Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050523/4222e3e7/attachment.htm

Hi, I'm a newbie on Asterisk and I'd like to know if it's possible to connect two or more asterisk together. In fact, I'd like install and connect some asterisk together. Thanks for advance, Cyril _____________________________________________________________________________ D?couvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos mails, photos et

Hi, I am new to asterisk, I would like to know how to configure asterisk to play a recorded message everytime a call if forwarded to it from SER. Which configuration files should be touched? I was scanning through the information on the internet and didn't find what I was looking for. Thanks. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has

Hello List, I'd like to ask how much you guys pay for an E1 (30 voice lines) and what company. You can email me personally and not the list. Best regards, Eddie _________________________________________________________________ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

Hi, We've got a customer site with Cisco 7940G Phones connecting to our Asterisk Server via SIP. However, upon running a "sip show peers" it states that the phone is : user/user (Unspecified) D 255.255.255.255 0 Unmonitored All phones can call out via our Asterisk Server fine regardless. The problem is when they try and place a call to one another, where it

I'm looking at setting up Asterisk for a completely IP environment. All intercompany calls. I work for a ski area. I currently use a 3Com Superstack for in our office. And an old small town phone system for up at the mountain. The phone system is dying and I'm hoping to bring IP to replace the old phones. It will be about 100 phones at about 20 locations all within about 4 miles of each

Dear R People: I have the following in a file: resp factA factB 39.5 low B- 38.6 high B- 27.2 low B+ 24.6 high B+ 43.1 low B- 39.5 high B- 23.2 low B+ 24.2 high B+ 45.2 low B- 33.0 high B- 24.8 low B+ 22.2 high B+ and I construct the data frame: > collard.df <- read.table("collard.txt",header=TRUE) > collard.aov <- aov(resp~factA*factB,data=collard.df) >

Hello all, Here, we use rsync for years to share software tests distributions between from France to USA, Singapore and London, and all is working fine. But to save space we also need to compress files depending on their access time, and on purpose uncompress automatically before use. This makes rsync useless because it makes, of course re-transfer and deletions. when a new file is detected

Hi, I have a couple of questions about MeetMe and call queues. I'm still pretty new to Asterisk, but already having to write a Service Center call manager for it (which I might add, our director has agreed to make open source!). MeetMe: How can I get MeetMe (does it even do this) to ask the user to speak their name first, and play that as the new member announcement. It seems

I am trying to get IPP2P working on my router. Thus far I can see connections being marked (see below), but they don''t seem to get saved or something. When looking at /proc/net/ip_conntrack, nothing has anything other than 0 for mark. The iptables commands for this are: iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j

Dear R helpers, I have one trivial problem while writing an output file in csv format. I have two dataframes say df1 and df2 which I am reading from two different csv files. df1 has column names as date, r1, r2, r3 while the dataframe df2 has column names as date, 1w, 2w. (the dates in both the date frames are identical also no of elements in each column are equal say = 10). I merge these

hello all, i want to split a list into smaller lists. the list looks like this: CW-W730 CW-W720 CW-W710 CW-W700 CW-W690 CW-W680 CW-W670 CW-W660 CE-W997 CE-W987 CE-W977 CE-W967 CE-W956 CE-W944 CE-W934 CE-W924 7W-W760 7W-W750 7W-96 7W-941 7W-932 7W-923 7W-914 7W-905 7E-W565 7E-W555 7E-W545 7E-W535 7E-W525 7E-906 7E-850 7E-840 ... i want the smaller lists

Dear R forum I have data.frame as df = data.frame(rate_name = c("USD_1w", "USD_1w", "USD_1w", "USD_1w", "USD_1m", "USD_1m", "USD_1m", "USD_1m", "USD_2m", "USD_2m", "USD_2m", "USD_2m",  "GBP_1w", "GBP_1w", "GBP_1w", "GBP_1w",

Why things happen is one of the great mysteries and joys of being a sysadmin... As for cleaning up SIS, I believe the "doveadm purge" command takes care of it. I have a daily cronjob which includes: #!/bin/sh # Permanently expunge old Trash doveadm expunge -A mailbox Trash savedbefore 2w # Optimize mdbox storage doveadm purge -A # Update fts indexes doveadm fts rescan -A -- Daniel

Chapter 9, "Troubleshooting and Data Recovery", p.115 states: "To enable background scrubbing, use the zpool set command: # zpool set scrub=2w The parameter is a time duration indicating how often a complete scrub should be performed. In this case, the administrator is requesting that the pool be scrubbed once every two weeks. ZFS automatically tries to schedule I/O to even

Selling analog GSM gateways at 119.00 USD. Polarity reverse for "call answer" and "call end". Compatible with all Digium/Asterisk analog FXO cards. Suitable for low-traffic call termination, inbound calls from cellular network or for phone bill optimization applications. Main Functions - Provide Accurate Anti-Polarity Signal - Incoming Calls Display - Add Prefixal

Hi, On Mon, 2023-08-28 at 14:34 -0700, Shannon Nelson wrote: > Finally following up to Simon's suggestion for some kdoc attention > on struct virtio_pci_modern_device. > > Link: https://lore.kernel.org/netdev/ZE%2FQS0lnUvxFacjf at corigine.com/ > Cc: Simon Horman <simon.horman at corigine.com> > Signed-off-by: Shannon Nelson <shannon.nelson at amd.com> IMHO

I think that even though some Microsoft employees may have good intentions Microsoft as a company can not be trusted. There will be always a danger that they will try to create their own version of R which works only on Windows and that will become increasingly divergent from "other" R. We witnessed such (cursed in my opinion) attempts with their treatment of Java and Internet Explorer.

So with "fts_autoindex=yes" enabled in plugins, is there anything I should be running regularly, other than the expunge/purge, to ensure Solr indexes are updated? I have a daily Solr optimize, and Solr autocommit enabled. I have an hourly "doveadm index -A *" command - is that unneeded? -- Daniel On 4/12/2015 6:53 AM, Timo Sirainen wrote: > On 10 Apr 2015, at 21:55,