similar to: tdm400p fxo not working

I've updated to the latest CVS as of today (and rebuilt RedHat 9). My setup is as follows: Wildcard X101P - channel 1 TDM400P - channels 2-3 - fxs cards with fxo signalling, channels 4-5 - fxo cards with fxs signalling I got CallerID to work on channel 4 with an old CVS, despite the usual "Didn't finish CallerID spill" message. However, as soon as I insert the following

Hi all, i use asterisk 1.2.7 and i have a problem with callerid. i use sangoma a200 cards. one fxo one fxs module i have these scenario - bob calls adam, where bob calls into my asterisk and adam picks up "from" my asterisk - bob and adam are speaking to each other - meanwhile eve calls adam, adam hears a beep, and knows there is an other caller on line. - bob and adam stop seaking

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! I live in Sweden and I am having problems getting asterisk to properly detect when a caller hangs up. And yes, I DO have disconnect-supervision on my line. Also asterisk sometimes misinterprets the disconnect-signal as another incoming call. This usually happens if I hang up first and then when the caller hangs up, asterisk treats it as a new

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

Can anyone tell me what this message means? Got event 17 (Polarity Reversal)... I'm running DAHDI 2.0 with a TDM401 card. Asterisk version 1.6.0. It appears that I get this Polarity Reversal each time an inbound call hangs up. This results in another ring, but no one is there. It appears as an unknown caller, but I believe its a phantom. Thanks, Jim [Oct 10 12:47:54] NOTICE[6669]:

<font size="2">I've got an odd situation where callerid is only picked up every other call.&nbsp; Is there anything I can do so callerid works on all calls?<br><br>I'm seeing the channel hangs up during a call<br><br>&nbsp; == Starting post polarity CID detection on channel 4<br>&nbsp;&nbsp;&nbsp; -- Starting simple switch

Hello list, This may or may not be Asterisk related, but if I had hair I'd pull it out over this. I have a TDM400P card in a Dell POWEREDGE 1550 running Asterisk 1.4.30. Everything works great except that every time it rains, I get flooded with this CLI message - == Starting post polarity CID detection on channel 1 -- Starting simple switch on 'DAHDI/1-1'

Hi ! I ma having trouble with my PTSN line. When I call to my asterisk I get this.. -- Executing [s at from-pstn:3] Hangup("Zap/5-1", "") in new stack == Spawn extension (from-pstn, s, 3) exited non-zero on 'Zap/5-1' -- Hungup 'Zap/5-1' -- Starting simple switch on 'Zap/5-1'[Jan 5 12:45:06] NOTICE[2893]: chan_dahdi.c:6869 ss_thread: Got event 17

Thanks for the suggestion. I have busydetect=yes in zapata.conf. You refer to "Martin's algorithm". Can you provide more details please? ----- Original Message ----- From: "Soner Tari" <list@kulustur.org> Subject: Re: [Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup detection failing To: "Asterisk Users Mailing List - Non-Commercial Discussion"

Hello list. I have a question about how to read the incoming calls' callerid on an FXO interface of a TDM 400 analog card; (it's one of those RED modules). Now -may this is the complexity adding step..- I have a GSM gateway attached to this FXO thing; incoming calls are processed as they should. But both when peeking on the CLI, as well as in the phone display I do not see the caller id.

Hello Fellows! I have a TDM2400 and I can't put it to work. Every time it receive a call the Asterisk handle it and call the SIP phone; when people pick up the fone they don't hear nothing and the caller hear the phone rings and nothing happens. In Asterisk console I can see the message answered by the SIP's phone. I lost a lot of time trying to solve this problem without success :(.

I have been having some troubles with the zaptel channel on what appears to be the inbound process. The box is running the stable CVS code and has a TDM400P 4-port FXO card in it for analog connectivity. Channel 1 is the only active port on the card at the moment as we only have one analog line. What has been happening is that it looks like Asterisk has been detecting an inbound call even though

Howdy, 1 x TDM400P card with 1 x fxo module. 1 x BT Pots line. Location - UK Calls work fine outbound but i'm unable to pickup the inbound calls. Asterisk debug: Asterisk -vvvvvvvvvvcg *CLI> -- Starting simple switch on 'Zap/1-1' -- Executing Wait("Zap/1-1", "1") in new stack -- Executing Answer("Zap/1-1", "") in new stack

Hi Can TDM400P detect polarity reversal on FXO module? We have C.O. lines that reverse polarity on Answer and release. Thank You This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you

So made my first forray into 1.4 and DAHDI and hit a problem. (Not convinced this is a DAHDI issue though...) Testing an analogue line and asterisk sees the caller ID being passed, but then fails to detect ringing. A plain old analogue phone plugged in rings just fine. Console output: == Starting post polarity CID detection on channel 4 -- Starting simple switch on

Asterisk Users, I am running a Debian "Etch" system with Asterisk 1.4.11 with a TDM03B card. Once in awhile, I get this error on the Asterisk, which causes my channels to be busy/congested, leaving me with just one channel to recieve and make calls: NOTICE[31454]: chan_zap.c:6367 ss_thread: Got event 17 (Polarity Reversal)... WARNING[31454]: chan_zap.c:6499 ss_thread: CallerID

Using the latest SVN of zaptel and asterisk, I can no longer receive incoming analog calls. The caller just hears it ringing but Asterisk doesn't pick up. I am seeing these error messages: [Apr 9 09:38:02] WARNING[16564]: chan_zap.c:6470 ss_thread: CallerID returned with error on channel 'Zap/2-1' [Apr 9 09:38:50] WARNING[16570]: chan_zap.c:6470 ss_thread: CallerID

I've just had polarity reversal provisioned by our telco to test hangup detect with a TDM400P I've set hanguponpolarityswitch=yes in zapata.conf When I start Asterisk I get "ignoring hanguponpolarityswitch" in /var/log/asterisk/messages I assume that the option is either not valid or conflicts with another setting somewhere. Any ideas?

Hello, I have recently purchased a TDM400P card with one FXO expansion card, and I'm having problems. The card does not pick up incoming calls. Asterisk detects the ringing line and rings various SIP phones as required. When a sip phone answers, the sip user hears nothing and the PSTN user continues to hear ringing. Here is the asterisk output for an incoming call:

Hi all. I am unable to answer calls coming into asterisk over PSTN. (UK) I want to have a call answered by my TDM400P/FXO module and forwarded to a sip phone. When I make a call from the PSTN to the BT line installed on my FXO module the sip phone rings however, when i pick up the call using the sip phone, the incoming call is not answered/routed by asterisk. As a result the sip phone is left