similar to: Follow Me solution

The problem I am running into is that when the call to my cellphone is made, it appears as though the call "completes" so it never rolls to asterisk voicemail. Here is my current config: exten => 102,1,Dial(${sipura},10,) exten => 102,n,playback(pls-wait-connect-call) exten => 102,n,Dial(IAX2/asterisk1/9139275900,10,r) exten => 102,n,VoiceMail(u102@default) exten =>

I hope someone can help me with this. This is what I want to happen. Someone dials in and goes to my extension. First, the phone on my desk rings If there is not an answer, I would like to have the dialplan call my cell phone. If I answer my cell phone, speak the incomming number to me. I press one of the buttons on my cell phone to accept the call. If I don't answer, or I don't

Hi All, I'm using DISA on my * server to avoid overseas toll charges when making calls to Western Europe from my cell phone. I have DISA working with a DID from a VoicePulse Connect account. The outgoing call to Europe is also made via Voicepulse Connect. I see that the IAX media path is bridging the inbound call to the outbound call so that the media stream entirely bypasses my server once

I am trying to do the following: 1. Call comes in to my * box over IAX (VP Connect DID) 2. Check to see if call should be forwarded to my cell 3. Forward the call to my cell phone and take * out of the media path. I am able to do all of the above except * is not able to natively bridge the call. I am using sixtel and for the call forward portion, but the calls don't connect before sixtel

I was looking at the sample "follow me" config (http://www.voip-info.org/wiki-Asterisk+Tips+follow+me <http://www.voip-info.org/wiki-Asterisk+Tips+follow+me> ) which uses a dial modifier 'c' to enable Answer confirmation - "If the letter c follows, then "Answer Confirmation" is requested, in which the call is not considered answered until the called user

Hi everybody :) I am a new member here and hope that someone gives me a hint for my problem: Let's say I am at work and my SIP phone (KPhone in my case) is connected to my private Asterisk. I want to call my wife at home so her SIP phone rings. She does not pick up the phone (maybe she is somewhere in the house and has to run to the phone) so after 15 seconds her cell phone should ring.

Hi, I am having a difficulty with getting two realtime user?s to bridge on answer. I have managed successfully to bridge the same two users/channels via the Bridge Manager api command and confirm that the two communicate directly bypassing the asterisk server (I confirmed this with Wireshark). Does anyone have some ideas? I have put some log entries below. I haven?t attached my

Hello asterisk users! I, like many people, have a cell phone. I also have some SIP phone devices (software and hardware). I'd like to have one number that rings all my phones and routes the call to wherever I pick up. However, my cell phone has its own call forwarding voicemail. I can't just turn that off, because then direct-to-cell calls wouldn't ever get to voicemail - that

I use IP Kall to forward my missed cell phone calls to. This way, if my phone is off, or out of a service area, calls will go to my * box. Concurrently, all incoming calls to my * box cause it to dial my local extensions at home, my extension at work, and my cell phone via NuFone. Problem: A loop can be created if my cell phone is not on. Say a call comes into my * box, it uses NuFone to call my

I have a Sipura SPA-841. It's developed a nasty habit. At random times, it likes to dial my cell phone voicemail number and play my messages to anybody who happens to be within earshot. Any clues where to look at what's going on? My voice mail number (extension 220 in my dialplan) is the only number being dialed. When this happens, show channels looks like this: IAX2/NuFone-1

Hi, I've been fussing with this for a while now - and cannot seem to get it to work correctly - or rather as I desire it.. I'm trying to implement a 'find-me' feature in my voicemail. Basically - pressing 1 at the voicemail puts the caller into a queue. The members of the queue are my cell phone and my work DID.. I need the queue to call both numbers at the same time and wait

I've tried to create a subroutine that sets callerid name based on number. extensions.conf: ........... exten => s,1,Answer() exten => s,n,GoSub(set-callerid-name,0${CALLERID(num)},1) exten => s,n,Dial(${mainline},60) ....... [set-callerid-name] exten => 0,1,NoOp( no CALLERID num set) exten => 02025462677,1,Set(CALLERID(name) = "Fred" ) ................ exten =>

I am using IAX to send a call to my cell phone. I want to be able to hit # and transfer it back into the office. I have added tTr to the dial command and hitting # prompts me for the transfer, but after I start dialing 103, it stops at 1 and tries to transfer it within nufone instead of my dialplan. This is the debug output: -- Called me@NuFone/1515480XXXX -- Call accepted by

I've tried to setup multiple extension dialing - ie dial 1 number and it rings at a number of sources. For the most part its worked.... Now if someone dials 107 it rings Sip phones at 102 and 107, then goes to voicemail after 40 seconds. exten => 107,1,Dial(SIP/102&SIP/107,40|r) exten => 107,2,Voicemail(u102@pstn) exten => 107,3,Hangup exten => 107,102,Voicemail(b102@pstn)

I'm trying to move the asterisk server to an Amazon Web instance. We have teliax for our sip provider. I'd like for our DID lines to be connected to a users cell phone. Seems simple enough, but I'm getting the dreaded one-way audio, even with nat=yes everyplace I can think of. The dialplan is real easy: [from-teliax-sip] exten => _j.,1,NoOp("From teliax sip with exten

Hello, I've problems with following - ----- --- --- PSTN | --- isdn --- | A | ----- iax2 ------ | B | ----- --- --- On [B], there is unconditional call forwarding set back via [A] (dialparties.agi is used) to PSTN. So, call from PSTN is routed via [A] to [B] and than back again into PSTN.

Today has been the day for satellite questions, apparently, so I'll proxy one out to the rest of the community... I asked this tangentially a month or two ago, but I'll put it in a more blunt way: If you have IAX2 trunking mode experience over satellite, please let us know your experiences with that protocol/transport combination. I've got several people asking about IAX2 and

What's going on here? 555* seems to indicate that the number is being passed as the callerID because NoOp says the phone number. I'm trying to emulate cell phone voicemail where you call your own number to check your voicemail. -- Accepting AUTHENTICATED call from 65.182.165.XXX: > requested format = gsm, > requested prefs = (), > actual format

On Tue, Dec 23, 2014 at 6:51 PM, Joseph <syscon780 at gmail.com> wrote: > > > Most cell phone don't have a USB port but you are correct, maybe I just need > IAX2 soft-phone like: > Zoiper - it works on most of the platforms. I think Zoiper registers > directly with Asterisk IAX2 (if configured) as an extension, isn't it? If your cellphone is capable of a Wi-Fi

Ernest, I hadn't thought of doing that, though having that added protection would be nice. However, what I'm trying to do it have an incoming call at my home number follow me to my cell phone for selected numbers -- Since I already have three way calling, I'd like get Asterisk to essentially three way my cell phone into the call (or my office number, etc.) I understand the