similar to: Cannot create a personalized unavailable message

Where are user's voicemail passwords stored and how does the asterisk administrator change them? TIA, Jeff Heath

I read on the Wiki that Asterisk Realtime requires CVS HEAD, but I've also discovered that not everything on the Wiki is 100% accurate (that's not a knock, but with a program that is changing as fast as Asterisk, it's impossible for the documentation to keep up). Is it true that Realitme requires CVS HEAD? TIA, Jeff Heath

I have a pretty standard setup with Asterisk acting as a PABX for a bunch of SIP handsets (in this case, SwissVoice IP10S). My users are complaining that when they forward their phones to their cellphones on unavailable (i.e. forward when no-answer), their cellphone only rings once or twice, and then Asterisk sends the call through to Voicemail. I'm using the standard extension Macro

Hello all! I googled lists.digium.com and ser mailing list, but did not find any working configuration of asterisk used as voicemail for SER. This is my config if (uri==myself) { if (method=="REGISTER") { save("location"); log (1, "Registered\n"); break; };

I've changed the spool directory in asterisk.conf to point to a different directory. Everything works/gets created just fine with the exception of the unavailable messages. When a user tries to create one, I get this on the console (below). I changed the directory to /vm in asterisk.conf. Any help would be appreciated. Thanks, - Darren -- Playing 'beep' (language

Hi: This should be easy. I'm running 1.2.15. When a caller calls someone's voice mail, it goes straight to a beep, even though there is an unavail.wav file in that user's voice mail directory. Here is the relevant part of extensions.conf: [internal] exten => 2211,1,Dial(SIP/211,10) exten => 2211,2,VoiceMail(u211@default) exten => 2211,3,Hangup Here is the relevant part of

Dear all, I noticed a very strange problem. When I tried using VoiceMailMain to record my unavailable message, the file does not get created even though I can find the corresponding mssage from asterisk: -- <SIP/2001-b6307d78> Playing 'beep' (language 'en') -- x=0, open writing: /var/spool/asterisk/voicemail/default/2000/unavail.tmp format: wav, 0x82828c8 --

I've been banging my head on a brick wall for about an hour now trying to understand why the following doesn't work (which is even provided as an example in the distribution!). The goal is to create a voicemail-only extension not associated with a phone. I'd rather not have an extension dedicated to VoicemailMain(), so I would like the user to be able to hit '*' during

I upgraded to 0.7.1 from a cvs version from a few weeks before 0.7.1 was relesed. now I am having troubles with my dialing plan and voice mail. As part of the upgrade I re-built the machine so there was a blank slate however after installing 0.7.1 I had no mail box creation script and could not figure out how to go about creating a mailbox, any suggestions would be usefull. I have looked at

A call comes in from the PSTN, Asterisk answers it, it goes to the directory, and then to the extension the caller designates and the user at that extension answers. The user at the extension then wants to transfer the call to another extension; on the Cisco 7940 they push the ?more? soft key, then the ?Transfer? soft key, then enter the extension number they want to transfer to, and hit the

I am trying to set up a simple Asterisk server. All it's going to do for now is to act as my voicemail box. I've got a DID from Voicepulse, and am using IAX (I'll get to SIP someday when I want to circumvent the phone company for long-distance, but for now I'd be happy to get a trial version of Asterisk running). So far, I've managed to set up voicemail.conf, extensions.conf

My dial plan seems to work great - in that when I call extensions 1234 it connects to 1234. Strangely, after the call terminates (the other side hangs up first), Asterisk continues in the same context and then matches to extensions _. which causes an invalid extension error! Why does asterisk not leave the context (called internalmenu) after the remote hangup? Instead, it continues to the

Hello everyone, I have Asterisk SVN-trunk-r7498 installed on a server (celeron 2.4 Ghz, 256MB) with a TDM40b a TDM04b and an avm fritz!card pci. I experience a problem with voicemail: my messages are good unless the incoming call comes from isdn, which means via the avm fritz!card. In this case (and in this case only) the message is disjointed and I can hear at most 1 second out of a 1 minute

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

I think you will find the functionality you are looking for is in * already. Here is an excerpt from the sample extensions.conf file that is included with the source: exten => s,1,Dial(${ARG2},20) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten

I am using the sample (slightly modified) macro for dialing phones. My extensions are in the 2000 range. Each extension has it's own external DID. Is there any way to have the macro look up the DID to be used for the extension and set the DID as the callerid? Maybe from a flat file somewhere? Or is there a better way to do this??? I know I can use callerid in sip.conf, but I only want the

Dear All, I can not transfer call in progress. What's wrong with my macro? I think tT flags is enough right? [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})}) ; Get CFU key exten => s,2,Set(DNDStatus=${DB(DND/${ARG1})}) ; Get DND key exten => s,3,GotoIf($["${temp}" = ""]?5) ; If not existing, goto priority 5 exten =>

Hello, I'm experiencing a weird problem when using the VoiceMailMain application. If I use the application after dialing a Local channel, there's strange beep just after asterisk answers the call and before the first locution. The extensions.conf I'm using is: Ruido extra?o al llamar a la aplicaci?n VoiceMailMain [default] exten => _X.,1,Dial(Local/${EXTEN}@test) [test] exten

Hi, I am looking at http://www.theschmandts.org/blog/?p=28 to setup missed call notification but i am having issue. following is my dialplan [macro-stdexten] exten => s,1,Dial(${ARG2}) exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten => s-NOANSWER,1,Voicemail(${ARG1},u) ; If

Hi there, I've got the following code (for remote enquiry of the answering machine) in my dialplan: [mailbox] exten => m,1,Set(TIMEOUT(digit)=4) exten => m,2,Set(TIMEOUT(response)=0) exten => m,3,Set(LANGUAGE()=de) exten => m,4,Read(Pin,unavail,4) exten => m,5,capicommand(echosquelch|no) exten => m,6,Gotoif($["${Pin}" = "${MBPIN}"]?7:9) exten =>