similar to: Upgrading to 1.x from 0.7 on Linux

Hi All... I have installed a single X100P card in my PC and am playing with Asterisk. The wire I plugged into the X100P has two POTS lines on it, wired on the RJ45 in the normal way. I am getting odd behavior. It seems when I dial out that the X100P dials both lines at the same time. I have two questions. First, I see that the X100P is only a single channel. Does this mean that I can

Hi All... Is it possible to cause asterisk to answer some distinctive ring patterns but not others? I have a POTS line plugged into an X100P and I would like * to ignore one ring cadence that is answered by a fax machine. How would I do that? Thanks...

I know the X100P cards are not supported by Digium any more, but for home office use, are they still acceptable? I have two POTS lines, one residential and one business line comming into the house. I'd like to get both into my * server and $15 total compared to > $100 for the newer TDMxxx card sure is desirable. Having said that, will the sound quality, functionality, stability, etc. be as

Hey guys, I'm having some trouble with gain settings using a Wildcard X100P and Zaptel 1.4 Beta 2 on Asterisk 1.4 beta 3. My transmit volume between an IAX client (idefisk) and a POTS device through my 1.4 box is great, but my receive volume is terrible. I can hardly hear a word they say. I've cranked my gains up to 100, inserted the wcfxo module with boost=1, but haven't had

Hello all, I have a question. I have an asterisk box setup with an x100p card installed. I have about 3 VoIP phones connected to it. The x100p is connected to my pots line. I also have regular phones connected the the pots line as well like most normal people would. When I get an incomming call all the regular phones ring and my VoIP phones ring. This is good. My question is this. Say

Not sure if anyone experienced the same - or if anyone ever connected a POTS phone to the "Phone" jack on an X100P card. The POTS phone rings normally when the FXO receives a call. The POTS phone can also make outgoing calls when FXO is not holding the line. This is desired. But if a call connected to the POTS phone lasts longer than a couple of minutes, Asterisk would receive

After over a month (well, ok, no more than an hour a day :) of planning, getting hardware, tinkering and testing, I'm about to my Ultimate Home Phone System (tm) online. Connectivity to the outside world is provided by: A. 1 POTS phone line connected through an X100P ($11/month, needed to carry DSL) B. 1 Vonage ATA186 connected through an X100P (needed for the rate center :( ) C. 3 Broadvoice

Noob here, my apologies in advance. Recently my employer decide to stop paying for my home POTS line, so I ordered packet8 for a home line instead of another POTS line, since I really dislike my local phone company, and the POTS line without any long distance would cost more than the $20 to packet8 with unlimited US calling. Anyway, this whole thing got me started thinking about VOIP a lot

I have an X100P used, at present, largely for outgoing calls. It shares the single incoming POTS line with a number of analog phones. Is it possible to talk the X100P (Zap/1) to answer a ringing call only if I ask it to? I'd like to use only the SIP phone in my office, but let the analog phones continue to work in the rest of the house (until I can afford FXS cards anyway..) I can force

Hi all, I am either going daft or not reading things right. I have just installed, (well 10 hours ago) a TDM40B and 3 X100P cards. I have followed the examples for the conf files to the letter. I can call the pots extensions OK from IAX clients, SIP clients and from the incoming X100P cards. But, if I pick up the handset to make a call all I get is the engaged tone and the following message.

Hello, After much searching of voip-info.org and google, I'm finally giving in and asking the list. The setup I have is this:- Single X100P card in a Debian system Inbound/Outbound POTS line connects to the X100P Sipura 2000 and Budgetone 100 on the LAN 1 Cordless and one conventional phone connected to the sipura Account on Stanaphone.com for eitherbound SIP calls. (I have other SIP

Hi All: I'm a newbee to Asterisk. I currently working on a project and want to know if Asterisk does support R2 Signaling. Thanks Begra8fl >From: asterisk-users-request@lists.digium.com >Reply-To: asterisk-users@lists.digium.com >To: asterisk-users@lists.digium.com >Subject: Asterisk-Users digest, Vol 1 #3647 - 9 msgs >Date: Tue, 04 May 2004 13:32:00 -0500 > >Send

I finally got my X100P working and now I have a question. I have several Skutch phone line simulators. My X100P works as expected with both a POTS line and an analog PBX port, but when I use a phone line simulator it doesn't answer the line. The phone line simulator doesn't power the line until the phone set goes offhook. Asterisk shows the RED alarm and then the alarm clearing but never

Folks, I'm looking at buying an FXO card for my home Asterisk setup. The question I have is, should I got for a the Digium Wildcard FXO or settle for the winmodem that Digium sell? I have spoken to the UK distributor and they only sell the Wildcard. They said that the quality of the modem was questionable. Does anyone have any experience of this? Is the modem noticeably different

My setup is as follows: Handset -> Sipura SPA 2000 -> Asterisk -> VoicePulse and Handset -> Sipura SPA 2000 -> Asterisk -> Digium X100P -> POTS I notice when making VoicePulse calls (but *not* POTS calls through the X100P) that there is significant "popping" and "clicking" on the line. This isn't enough to interfere seriously with the call, and

Hi. I have been searching through old threads and various forums, but can't seem to find out what the consensus view is here on the best type of FXO hardware to use for a home asterisk implementation. Specifically, should I buy a FXO ATA like the Sipura 3000, or a PCI form factor port like the Digium TDM400 series. I have read horrible things about problems with the X100P, so I have ruled

So I've been on the Asterisk list for a long time. Mostly looking to set it up as a cheap alternative to a commercial MeetMe bridge, as a for-fun project. I keep noticing the Wildcard FXO X100P sorta seems like a Winmodem. Winmodems are basically a sound card chip tied to a pots port, where the Winders driver takes on the MO/DEM functions in software. I've always despised them as a data

> Just wanted to let you know you were just left a 2236:45 long > message (number 1) in mailbox 1000 from an unknown caller, on Monday, > February 21, 2005 at 05:38:14 AM so you might want to check it when you > get a chance. Thanks! > > --Asterisk Hmmm... Call came in either via a SPA-3000 or an X100P Zaptel FXO interface. Got 2200 minutes of beep-beep-beep-...; the caller

Hi All... I have a maddening problem... I have Asterisk configured to pick up a line after 4 rings. I do this to allow my fax machine to pick up a particular distinctive ring pattern, so I don't have to pay for a dedicated fax line. If someone calls the line, lets it ring 3 times and then hangs up, Asterisk answers the line, and holds it off hook forever, constantly playing the

Hey all...I'm brand new to * and I want to convert my home into a pbx type setup. I've figured out that I want a Wildcard X100P to bring my single POTS CO into my Linux box. My problem is that I'm sure sure what I need to do to get my analog phones connected up into a structured phone system. It *looks* like I can go the route of the Cisco Analog -> VOIP for about $100 on ebay.