similar to: Avaya Partner ACS system, pre 7.0

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the

Anyone have an H.323 trunk tied between their Avaya and Asterisk box that works? I am having some issues trying to get the two systems to connect. I am using the ooh323 channel to try to make the connection between the two system. I have all my configs if anyone would like to look over them. If I do a trace on Avaya I get a denial event 1191: Network Failure. Thanks! -------------- next part

Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. "cas

I remember someone posting here some time ago about commercial offerings for taking channel banks of Avaya partner phones and turning them into asterisk compatible (SIP?) devices, but I can't seem to find a reference to the hardware manufacturer or specific experiences. Would anyone care to enlighten me? Off list is fine if this is a repeat, thanks very much. Matt -------------- next part

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

So far I have not found a way that I can register the Avaya phone with Asterisk. From what I have found so far is that Avaya phone needs the Avaya Media Server and Avaya Gateway. Looking at the h.323.conf (in Asterisk) and the file 46xxsettings.txt (avaya file located in tftpboot) there are no settings to make the phone initialize. I have sent an email to the Asterisk Users Mailing List to see

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23] WARNING[6227]:

The company I work for has deployed an Avaya IP phone system. They have deployed the Avaya 4602 and 4620 IP telephones. They might be sending me one of these phones for use in my home office. Question: Can I make this IP telephone register and work with my Asterisk server? I don't know if it is a SIP phone? I searched thru the Avaya site, but can't find whether it's a SIP phone or

Hi, I'm trying to integrate my asterisk PBX to an Avaya PBX. I am using chan_ooh323 from asterisk-addons. I am able to make a call from SIP Phone -> Asterisk -> Avaya -> Station (phone) and vice versa. I am also able to make a call from SIP Phone -> Asterisk -> Avaya -> PSTN. However I face problems when I make DID calls from the PSTN. The DID calls are made through

Hi I've a softphone account to a AVAYA H.323 system, basically, it has a numeric ID (which is the extension number) and a numeric password. Instead of using the default AVAYA softphone (H.323), can I make asterisk as a H.323 client and login to the AVAYA system via any one of its h323 modules? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I'm running Asterisk 1.0.0. I am a customer ( and supporter ) of voicepulse. For me, it works perfectly, but one of my customers noticed a small problem: During a conversation, when the otherside isn't talking, it's almost like the mic turns off. Not that big of a deal I know, and the more I think about it, the more this seems a voicepulse issue. But in the off

I just connected an Asterisk server to an Avaya Pbx using the instructions at: http://www.voip-info.org/wiki/index.php?page=Asterisk +Avaya Everything seems to be working as I can send and receive calls. The only detail I am having a problem with is that when an extension on the Avaya calls an Asterisk extension, I only get the name part of the CID, not the number. From Asterisk to the Avaya

HI, I am trying to setup winbind on Samba 3.0.2 running on Red Hat AS 3.0. I have completed most of the steps of setting up winbind successfully but when it came for me to login in using the AD account username and password, it didn't allow me to login. the error message i am getting is incorrect password or check username. During the setup i tested the wbinfo -u command and i was

Hi List, Ive got a bunch of Avaya IP9640 that we want to convert to SIP and then hook up to Asterisk so we can dump this overpriced Avaya system. Ive got ahold of the SIP firmware, but I cannot find anything on how to convert the phone itself to SIP, when I go into setup mode it wants a "command" which im guessing is the program code like the rest of the Avaya systems works. Has anyone

I am facing one way audio problem in sip trunking between asterisk and avaya. +-------------+ +----+ | avaya sip |-------| P1 | +-------------+ +----+ | | | +-------------+ | Asterisk | WAN

Right-- I've seen the Avaya document you cite below. It says "To administer DHCP option 242, make a copy of an existing option 176" but I don't have any example of option 176 or 242 to copy, and don't know what to do to /etc/dhcpd.conf to make it offer option 242. Then there's this long table of parameters to use with (presumably) option 242. I was hoping someone had a

Ok, to review, I'm trying to get Avaya 9608G to come up in a pure Asterisk environment-- no Avaya SBC or gateway or any other Avaya gear in sight. I have the phone working to the point where it boots up properly, then displays a Username and Password prompt, and says its extension is 123 and the time is 4:57p, which is wrong. But please don't tell me the only way to program up each

I'm trying to make H.323 trunk between AVAYA&Asterisk. But call from AVAYA is terminated inmediatelly when apps DIAL on Asterisk is started. Does any one use AVAYA and h.323 channel? Thanks Bob.

I attempted to update an Avaya 4602 phone to the latest SIP firmware and now the phone stops at the bootloader. It keeps requesting an appsip.ebin file from my HTTP server and is no longer checking my TFTP server for update files. Since no appsip.ebin file was included in the firmware update provided by Avaya, I have no idea where I am supposed to get this file. And also since it is no

This is my first post, so please feel free to direct me to another list if needed. I am in the early stages of researching Asterisk. I administer a small Avaya Definity G3 switch (~400 users). Can anyone point my to resources/documents/actual implementation notes of using Asterisk's voicemail with an Avaya Definity switch? Many thanks, Brian Hudson --------------