Displaying 20 results from an estimated 5000 matches similar to: "HFC PCI"
2005 Jan 10
1
Digi Datafire Micro V ISDN Card
Hi to everyone!
I am new to this list and i want to greet you all!
I am trying to install Asterisk on a Fedora Core 3 Distribution with a
Digi Datafire Micro V ISDN Card.
I know that I have to use the ISDN4Linux so in modem.conf I set the I4l
driver ,the msn and device.
Modem.conf
[interfaces]
context=remote
;driver=aopen ; modem by AOpen
driver=i4l ; isdn4linux - an
2004 Jun 30
6
zaphfc - hfc pci based ISDN card : point2point & DDI
hello,
anyone has worknig ISDN hfc-pci card in DDI (DID) point2point mode?
what kernel ?
and second question mISDN driver .. anyone has working solution with
mISDN and maybe fritz card?
what you suggest for DDI -> point2point mode (card,kernel,chan_..., ...) ?
thank you,
Tomaz
2005 Sep 27
1
R: Best drivers for HFC-S ISDN cards
Mine is very similar: i don't have echocancelwhenbridged=yes because it seems work only on TDM, is it ?
And in Italy, I often have set pridialplan = unknown
About echo I have some problems, but only at the beginning of the call. After 3-4 seconds the echo became almost null, specially with snom 190; with pa168s and ywh10 I have again some problem, the echo come up also after 1 minute of
2008 Apr 03
0
HFC-S ISDN cards in Xen3.0.3 DomU''s
Hi!
I just wanted to ask if anyone managed to get "ordinary" HFC-S ISDN
cards with the zaphfc driver running in a Xen3 DomU.
I am referring to this post (
http://lists.xensource.com/archives/html/xen-users/2007-04/msg00202.html ),
which perfectly describes my problem and I am therefore going to
simply copy-and-paste it here:
----------- snip ------------>
Hi,
I''m
2007 Jul 24
0
mISDN & Asterisk 1.4: HFC-S card not responsive
Hi,
I have installed Asterisk 1.4 with mISDN with the
install-asterisk.tar.gz script from beronet.com. On my system I have two
cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to
work well with mISDN on my system from a previous installation.
Now however, the AVM card works well at first glance, i.e. it
"registers" incoming calls and works through the asterisk
2004 Jul 13
1
HFC-S card and Unable to create channel of type 'Zap'
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
hi,
i'm new to *
I've installed an hfc-s card (DIGI Micro V) with bristuff 0.0.2;
when i try to call outside i get:
-- Accepting AUTHENTICATED call from 192.168.1.110, requested format = 1024, actual format = 1024
-- Executing Dial("IAX2[pippo@pippo]/2", "Zap/g1/0123456") in new stack
Jul 13 13:42:49
2005 May 04
0
hfc isdn cards & zaphfc in domU
Hello,
After searching the archives, I''ve found only two messages regarding
this case, but there were no solution.
I have a similar problem, so I try to ask here.
I have twi HFC chipset ISDN cards in my pc:
0000:00:0d.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02)
Subsystem: Cologne Chip Designs GmbH ISDN Board
Flags: bus
2006 May 27
2
amportal doesn't start with brestuff(ISDN)HFC-PCI
Hi!I've installed Asterisk@home and I have a ISDN card,(Cologne Chip Design
GmbH ISDN network
controller [HFC-PCI](rev 0.2)
This is how I installed bristuff:
how to install hfc card
after unload asterisk and amportal whit
amportal stop
type "setup"
unselect zaptel in system service...
and set the lan
--->reboot<---
cd /usr/src
wget
2005 Mar 19
0
my hfc card does not like Siemens
Hello,
I tried to connect my Siemens ISDN 4170 cordless small PBX to the
asterisk with an Acer HFC isdn card but I have not seen any success. The
asterisk can see the card but no success to receive or dial a call. The
Siemens 4170 gives fault in all the handsets with trying to dial and
does not receives anything.
I have linux kernel 2.4.29, asterisk CVS-v1-0-03/12/05-17, zaphfc
2005 Jul 01
1
Unable to forward frame/voice
Hi,
We've exhausted our internal capabilities as well as Sangoma tech support and
were hoping someone with some expertise could help us with a pointer. Briefly,
our issue is as follows.
Periodically (several times an hour), we get either of the following error
messages in our asterisk messages log. These correspond with dropped outbound
calls on a one-to-one basis when the second error
2005 Jul 17
2
HFC BRIstuff woes
Hi All,
It's broken !! (drat)
Asterisk if failing to load with the following error (taken from end of
/var/log/asterisk/full) after adding bristuff.
Can anyone help please?
Jul 17 19:57:54 VERBOSE[2503]: == Registered channel type 'Phone'
(Standard Linux Telephony API Driver)
Jul 17 19:57:54 VERBOSE[2503]: [chan_zap.so]Jul 17 19:57:54
VERBOSE[2503]: [chan_zap.so] =>
2005 Feb 01
1
HFC-5/S + Asterisk
Hi Guys,
I got 2 internal HFC-S[5] (not sure what character this is) internal
modem cards yesterday, thought I would get different makes as the one
was a named brand, the other not... but anyway...
Its picked up by lscpi as a ...
"Network Controller: Cologne Chip Designs GmbH ISDN network controller
[HFC-PCI] (rev 02)"
I'm using kernel 2.6.10, and I saw I must use CAPI. I
2007 Jul 17
1
chan_isdn with HFC-compatible
hi list,
I'm currently trying to get Asterisk running with an HFC-compatible ISDN
card (no-name product, but supposed to work with Asterisk according to the
packaging). the ISDN-card is connected to a alcatel ISDN-system where it
should act just like a normal ISDN-phone.
I went with http://www.misdn.org/index.php/MISDN_with_Asterisk and installed
the package from beronet.com including:
2006 Feb 16
0
Lots of lost interrupts when running HFC ISDN card in NT1 mode
Hi,
I'm setting up an asterisk server with this hardware configuration:
AMD Athlon 1000 Mhz
256 MB ram
3ware ATA raid controller
2 * Ethernet controller
2 * ISDN HFC controller
One ethernet controller is connected directly to the internet (public
IP)
One ethernet controller is connected to the internal lan
One ISDN controller is connected to the public telephone network
One ISDN controller
2007 Oct 03
4
Problem with mISDN and HFC-Cards in Asterisk-DomU
Hello,
I am having problems, getting my asterisk-domU to work properly. It consists
of the following components:
- Debian Etch under Xen-3.1 with a 2.6.18-kernel
- Asterisk 1.2.24
- mISDN-1.1.5
I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in
permissive mode. This is working fine.
The strange problem is, that the two HFC-ISDN-cards are not beeing initialized
by the
2005 Jun 28
0
cheap HFC card on Bristuff vs cheap HFC card oni4l vs Fritz ISDN BRI card on CAPI
Hi,
Bristuff works great with HFC card... your compilation problem may come
from your kernel configuration...
You should check this doc, at least, for the redhat config :
http://www.automated.it/guidetoasterisk.htm
Then, installation of Bristuff works like as charm !
Bye
David Masure
-----Message d'origine-----
De : vdasilva [mailto:aquamoon@wol.co.za]
Envoy? : mardi 28 juin 2005 09:01
2007 Dec 28
2
Problems with zaptel and HFC-S PCI card
Hi list,
Now that I've got my Asterisk server to recognize my HFC-PCI card, I've run
into some serious problems. The first thing I noticed was this message
that would show up every five seconds on the CLI:
Dec 27 15:46:42 WARNING[12484]: chan_zap.c:2512 pri_find_dchan: No
D-channels available! Using Primary channel 3 as D-channel anyway!
== Primary D-Channel on span 1 down
2006 Mar 31
1
Re: BRI cards, HFC, and bristuff - a general questionto clear up my understanding.
Does anyone test Asterisk 1.2.X + bristuff-0.3.X and TDM card? We can't
get it to work.
-David
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Julian J.
M.
Sent: Friday, March 31, 2006 1:44 AM
To: Chris Earle; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Re: BRI
2006 Mar 19
0
HFC USB (was MultiBRI in Australia - found one-maybe)
I've just found my first problem. /dev/mISDN was being created with the
wrong permissions...
Thanks
James
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-
> bounces@lists.digium.com] On Behalf Of David Phelan
> Sent: Monday, 20 March 2006 12:18
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>
2005 Jul 13
0
Two ISDN cards on same machine
Hi everybody,
I have a Asterisk installation working with a Digi card (HFC-S PCI A ISDN card) and another Asterisk installation with a Digium (Digium Wildcard TE110P T1/E1 Card). For Digium I used zaptel drivers but Digi works with bristuff drivers.
Both installations work fine and are connected to two different phone lines.
What I want to do is let calls incoming on the Digi installation be