similar to: Kernel panic loading second fritz card

Hi, I successfully installed 2 avm card in my asterisk box but I'm unable to make call. My capi.conf is: msn=0721111,07211115 incomingmsn=* controller=1,2 softdtmf=1 context=default echocancel=yes callgroup=1 devices=2,2 my capi info : Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. my extensions.conf : exten =>

hello, got anybody succesfully setup asterisk with three avm fritz pci cards - using the howto described in http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO i already have asterisk working with 2 cards, by when i add third card and compile driver ( see capiinit debug below ) asterisk freeze on capi initialization.... does anybody know how to solve this ? regards Marian ------------------

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM Fritz CAPI driver from the AVM website and compiled against the current kernel. However, as soon as I modprobe it I get: CAPI Subsystem Rev 1.1.2.8 fcpci: module license 'Proprietary'

HI all, Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/ I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying /etc/capi.conf (removing the coment # in front of fcpci line) I received the following error when executing 'capiinit' - FATAL: Error inserting fcpci

Hi, I'm heaving trouble using two Fritz ISDN cards in one machine. I followed "http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO" and i think everything works great. cat /proc/capi/controller shows: 1 fcpci running fritz-pci A1 3.11-02 0xb400 5 2 f2pci running fritz2-pci A1 3.11-02 0xa400 10 The asterisk CLI shows: *CLI> capi info Contr1: 2 B channels

Hi list, i'm keen to move to Asterisk 1.6, so really need to update my system which is running Mandrake 9.2 although it has been solid for years, fo Fedora 8. I have a Fritz! card for ISDN BRI, I have installed the drivers/kernel drivers from ATrpms (http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm)

So I've got a PBX running with one Fritz card with the fcpci module and that works fine, but add another one and... kersplat... Kernel Panic. It boots fine with two cards, but panics as soon as the first fcpci.ko module is 'modprobe'd - I don't even get as far as modprobing the second. Any ideas on what's going on? Should I just back-up to an older version of the fcpci module

Good day, *newbie alert* I try to run * with capi_chan (and later on SIP). System: Debian 3.0 / apt-getted most stuff except chan_capi and b1.t4 HW: AVM B1 ISA / Celeron 400 / 128MB RAM Starting * the following ends up in the messages Jul 22 19:47:03 WARNING[16384]: File chan_mgcp.c, Line 2925 (load_module): Unable to get our IP address, MGCP disabled Jul 22 19:47:03 WARNING[16384]: File

I've put my fire proof suit on ready to ask a question ;o) Redhat 9 Kernel 2.4.20-8 AVM Fritz PCI Problem 1... i have followed instructions from:- http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI (Plus many many other sites found via google over the last 16 hours) after modifying the makefile & defs.h,

I tried that but it still doesn't work... I think I don't have the correct approach. Have I to install any ISDN drivers (=modules ?) BEFORE dealing with CAPI ? If yes, why shouldn't I use the hisax drivers (which are kernel ones) instead of fcpci drivers (which doesn't seems to work, by the way...) And finally, how is it possible to link the two modules together? As you can see,

Hi again! > I have excellent success with the tiny "fcpci" and chan_capi, which is > also working great with capi4hylafax. See > net-dialup/fcpci-0.1-r1 in gentoo (should not be difficult to use this > on other distros, but I have never done so). Do not confuse this with > the "fritzcapi"! I managed to install fcpci and it seems to run fine (capiinfo

Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which

Someone have info about install an AVM fritz into FC3 ? I'm getting problems with kernelcapi, after succesfully installed the fcpci support. Thanks -- Adri? Vidal adriavidal@gmail.com Mail is better with 1Gmail

All, I have been trying to get CAPI4Linux working on my machine and being frank am failing miserably! I am looking for any help available, I am real newbie (so please be gentle) and choose to run Mandrake 9.2 as it appears quite friendly (or so I thought!). I have been following the guidance found at http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI for the AVM card (actually I

Hello, Has anybody installed 2 Fritz pci cards in an asterisk box ? I can't make them work : each card is working fine when installed alone (with chan_capi), but I get a kernel freeze when doing 'insmod' with both cards installed. I am using Mandrake 10.1 with kernel 2.6, so the hack described at http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO cannot be used (the hack requires

I am sitting on thos problem whole day I have never ISDN card in my life. Now I have to runn asterisk with 4 cards very quickly. I have installed chapi_chan and now I pached and recompiled kernel 2.8.1 for mISDN but I don't know how to check that cards are working and should look next step Thanks again for any help I'm Asterisk newbie. Kind regards, Corvin.

I have an ISDN card, Billion ISDN PCI Card I tried to use the ZAPHFC, I patched the kernel, I did anything (also followed reccomandation on use on Suse Linux Professional 9.2 --my box is) using bristuff last version. In the end I succesfully compile zaphfc, but I am not able to use the card (a lot of problem running zapcfg, a loto of problem starting asterisk saying about wrong anything (from

Hi Folks, I have to setup a new server with a fritz-pci-ISDN-card inside. For it the fcpci-Packages from atrpm-repo is needed. Trying to install this package on a machine with the newest CentOS5-Plus Kernel I get an error message Missing Dependency: /boot/vmlinuz-2.6.18-8.1.14.el5 is needed by package fcpci-kmdl-2.6.18-8.1.14.el5 Okay -I have a vmlinuz-2.6.18-8.1.14.el5.centos.plus. Any

If I do that, the modprobe doesn't find any module called fcpci and is looking for any module called hisax_fcpcipnp as it's the one install for the isdn fritz card. # capiinit modprobe: Can't locate module fcpci ERROR: failed to load driver fcpci Maybe, I should reinstall the fritz card drivers itselves? (however, I don't think so...)

I have Asterisk RC2 setup here with a Fritz ISDN card on Debian Woody. I'm using chan_capi-0.3.5 and fcpci-suse8.2-03.11.02. Settings are pretty much the default, except in order to get the fcpci module to compile, I had to follow the instructions here: http://www.voip-info.org/tiki-index.php?page=Asterisk%20AVM%20Fritz%20CAPI%20Driver%20Install but the drivers would only compile if I left