similar to: "Succes" report for TDM400 and IBM Netfinity 5600

I have an opportunity to pick up a couple of NetFinity 5500's 4 way Xeon 550's w/ 2 gig RAM for very little $$$ I have seen this: http://www.mail-archive.com/asterisk-dev@lists.digium.com/msg00719.html In it, there is a passing remark to the Digium cards having problems with NetFinity's. Can anyone here comment on whether this is still an issue with * 1.0? It'd be a bummer if

Hello! Attached to the bottom of this e-mail is an edited version of an e-mail I originally wrote to Digium tech support regarding Ouch and Power alarm errors I have been receiving on my TDM400. It contains a great deal of detail regarding my setup. In the end, I have found that one of the 5 phones I'm trying to make work with Asterisk is contributing to the generation of these errors.

I hope the CentOS people don't mind me cross-posting for their input. I've just done a clean, text-mode minimal WBEL4 install on an IBM Netfinity 4500, essentially the same hardware as an xSeries 340. The install went fine but now the box will boot, run through the initrd init sequence, perform its switchroot then hang here... SELinux: Initializing. SELinux: Starting in permissive mode

> hwilmer wrote: >> >> I'd like to monitor the disks connected to a ServeRaid-8k controller in >> a server running Centos 7 such that I can know when one fails. >> >> What's the best way to do that? > > From a *really* short search, see it has a controller card If you do an > lspci, what does that tell you - is it yet another rebranded LSI card? If

Hello! I am in the middle of having a vanity toll-free DID set up. It's been 13 days now (9 business days). This is the first time I'm doing this, and I'm not sure of the process. There has been a very weird progression of changes on my number, from fast-busy, to a message saying that I'm calling from a phone with restrictions (no matter *what* line I call from), to a

Hello! I would like to get connected with a VoIP provider for home. At some point, I'm sure I will be connecting to it via an Asterisk box, but for now, I will be using whatever hardware they provide. What recomendations do you in the Asterisk community have for a reliable VoIP service that will hopefully interoperate with Asterisk? A company that is actually willing to work with an

Hi, it happens I could get a Netfinity 5100 IBM server and I was wondering if anyone has successfully installed CentOS4 (or even 3) on this server. Thanks, have a nice day Simone

Hello! We are open to the possibility of changing our business telephone number shortly. This will most likely be necessary due to a physical move, changing providers and a few other reasons. However, we woud like this to be the *last* time we need to do this. Ever. No matter what. Is that possible? On the Internet, you get this power with domain names. We "own" our domain

Hi, I have just upgraded an IBM Xseries x225 server to CentOS 4.2 (from CentOS 3.6) and found out that write back cache is not enabled for the drive representing the RAID array. The RAID controller has 128 MB battery backed cache. Write back cache is enabled in the controller configuration (using the IBM boot cd) and verified using the IBM RaidManager utility, but the boot messages show that

Hello! Now that I finally have my TDM board working, I want to move forward with using PBX functions. However, it seems cumbersome to use standard POTS telephones with Asterisk. I know that there are many of you installing even large systems based on channel banks and analog telephones. What phones are you using? How do you simulate phone system features on a phone that doesn't have

Hi there, I'm in the process of installing Centos 5.2 on an IBM x236 w/ ServeRAID 7k I recently acquired to act as a samba file server. The hardware has all passed various stress tests I could throw at it so we're okay there. My question is. Has anyone had any luck getting the latest IBM ServeRAID Manager v9.0 working in CentOS? If so how? ServeRAID Manager is based off Adaptec's

IBM''s website says that Solaris 10u1 has them built in, Shouldn''t that mean they are in sNV too? I''m booting off the network and off DVD, and just before the installer starts I get a message about ''no disks found.'' Format does the same thing. What driver module should be used for the ServeRAID 7k. I did use the ServeRAID Support CD to define the

Hello! I wanted to make sure that, in addition to my complaints, I make it very clear: Digium's support is excellent. The jury is still out on the usefulness of the TDM products. However, Digium has worked very hard to make sure that this issue is resolved. I actually got an e-mail from someone at Digium actually asking what they could do to make me happy! She even gave me

I need to install CentOS 5.2 on a IBM Server xSeries 226, which comes with a IBM SERVERAID 6i RAID card. I think it is not a true hardware RAID card. I has, nevertheless, an interesting feature: 128MB of cache with battery backup. I launched the CentOS boot DVD and CentOS correctly identified the card and the RAID 5 array as configured by the controller's BIOS. My question now is:

Hi all, we are about to buy some IBM x3550 M2 servers with ServeRAID M5014 SAS onboard controller. Can anyone confirm that these controllers will work with CentOS 5.5 (seems to be some rebranded LSI controller). I cannot find any hint in the 2.6.18-194.3.1.el5 sources... Regards, Peter -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type:

Hello! Several of my customers would like to add a backup to their Internet connection. ISDN is a good solution: decently fast for a dial-up-type connection, yet still faily affordable. While I was at it, I decided to look at a couple of more creative telephone service options to possibly improve their service or lower costs at the same time. These customers range from having just a

Hi, I'd like to monitor the disks connected to a ServeRaid-8k controller in a server running Centos 7 such that I can know when one fails. What's the best way to do that?

[NOTE: I apologize in advance if this shows up as a duplicate. I sent it once by accident from the wrong account, so the message has been waiting moderation. If the moderator reads the list, hopefully they'll notice I already posted :)] I have a number of machines which are used for mail storage. We've had issues with sporadic slow connections to the machine, seemingly blocking on I/O.

Hi, I asked yesterday about a problem with x306 and IRQ sharing, didnt get much info, now, i was playing with lspci, and see something strange, lspci -v shows me the TDM400P card is on IRQ 7, and the SCSI card is also on IRQ 7, lspci -bv (from the man - b - shows "bus-centric view, as seen by the BUS and not by the kernel) shows me the TDM400P is on IRQ 5, why does the kernel puts it on

Hello! In spite of a number of complaints, I have tried to use a TDM400 on a Via EPIA-MII motherboard with a 1.2GHz C3 CPU. cpuinfo and interrupts are included at the end of this e-mail. I have had no problems with it so far that I can attribute to the computer. I have, though, had continual problems with a certain telephone... Anyway, this module currently has 3 x FXS modules and 1 x