similar to: OT: VIA Mini-ITX, Asterisk, and hardware

Hello, I'm trying to put together a low cost - low powers PBX appliance for several customers. I have purchased a couple of the soekris net4801 boards and have asterisk up and running on them fine but they just don't quite cut it in the processing power department. I've been able to get about 10 simultaneous SIP calls with simple ulaw (no encoding decoding). While this might be OK for

Hi, I have a EPIA mini-itx board that I have been running Fedora 4 on. I want to install CentOS 4.4 on it since FC4 is no longer supported. The install goes fine but when I reboot the machine after the install I get errors like the following: hda:<4>hda: dma_timer_Expiry : dma status == 0x21 There are other errors about not being able to access the disk and eventually the kernel panics.

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

i had such problems on my mini-ITX. when sharing irq's with video or sound card, network traffic during ogg playing (for example on nfs) or quick moving windows crashed the interface. ifconfig down/up resolved the problem. it has been solved for a while now (i couldn't reproduce this problem) i think. regards, OLivier Le Jeudi 12 D?cembre 2002 03:45, The Anarcat a ?crit : >

I would like to ask what people think the best way would be to build a low-power consumption, passively-cooled system. For example,one could use a fanless-Eden (mini-ITX/EPIA) system, but the loss of FPU power would limit performance. The obvious choice for FPU work are the Intels and AMDs, nut they're all power-hungry radiators. Is there something that can offer the quiet, power-savings of

I've seen the embedded posts. Is anyone running Asterisk on the MINI ITX? James Taylor MetroTel 3505 Summerhill Road Suite 11 Texarkana, Tx 75503 903-793-1956

Hi Kristian, Anywhere I can read about this Soekris/AstLinux project? ... Regards, Hans -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Kristian Kielhofner Sent: Thursday, February 24, 2005 6:02 AM To: jim@vanmeggelen.ca; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users]

Hi Everyone, I'd be grateful if anyone can help with a couple of queries I have. Recently I downloaded Centos 3.3 and cannot get it to install I my system. The system I am using to install is a based on an original EPIA Mini-ITX m/board. At a certain point in installing it comes up with an error saying something like "system not supported". Can anyone advise if they have got

Does anyone have recommendations for (or against) mini-ITX platforms to be used with Wildcard X100P and TDM400P cards? I am considering the use of systems using VIA EPIA CL and Epia M as small, quiet platforms on which to host Asterisk.

Hello Before I order a Travla C156 case (http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX motherboard (either the fanless ME6000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the fan-equipped M10000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=163 ) , and a PCI FXO card from Digium or OpenVox... has someone already

-------------- next part -------------- An embedded message was scrubbed... From: Steve Rodgers <hwstar at rodgers.sdcoxmail.com> Subject: Via Mini-itx anaconda install failure Date: Sat, 1 May 2004 14:31:43 -0700 Size: 849 URL: <http://lists.centos.org/pipermail/centos/attachments/20040501/e69b2948/attachment-0005.mht>

I am looking into convising the boss to get me a mini-itx system to replace my workhorse notebook (I have to have a corp notebook and I can remote terminal into a Centos server from it). So I have been playing with one mini-itx system (the decTOP) and am looking at my options. I want a fast processor, 1Gb memory, LAN, 4USB, VGA. Wireless and bluetooth optional USB dongles along with a

Is there anyone who has successfully put together a "high-powered" mini-itx ZFS box that would be willing to post their system specs? I''m eyeballing the KI690-AM2... http://www.albatron.com.tw/english/product/mb/pro_detail.asp?rlink=Overview&no=239 ...but am having a difficult time locating it and a suitable case currently. I was in negotiations with a hardware source,

Hi, As the subject suggests, I am trying to remote boot a Mini-ITX system. I am using PXELinux as the bootloader, and Memdisk (2.11) as the 'kernel'. My ramdisk image is a hard drive image based on PC-DOS. Two things go wrong during the boot process. 1. "INT 13 08: Failure, assuming this is the only drive" message 2. "Loading boot sector... booting..." message,

I've got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 card but I'm having a terrible time with the sound setup. I tried RH9 and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I've used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers with varying results. I can setup the audio to work with a few different applications, 2 channels and 6

Powerful enough to run a small asterisk server though not sure if the drop down in size from a mini-atx or a micro-atx but I'm sure someone will try. http://www.geek.com/first-look-via-px10000-pico-itx-motherboard Regards, Dean Collins Cognation Pty Ltd dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 Ph +61-2-9016-5642 (Sydney in-dial). --------------

Hi, Did anyone try to install Asterisk on the Mini-Box M300 with a Versa mini-ITX board 1GHz VIA x86 CPU? The box looks promissing, but I am not sure if Digium cards are compatible with the mother board (Versa mini-ITX) Also I am not sure if the 1GHz VIA processor can handle a Digium 24 port analog board, or an E1 digital board. If anyone had tried the Mini-Box, the processor, of the mother

> > JR Richardson wrote: > > > I?ve got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 > > card but I?m having a terrible time with the sound setup. I tried RH9 > > and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I?ve > > used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers > > with varying results. I can

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

Has anyone successfully run asterisk with a VIA processor ? I have tried unsucessfully, do I have to run make with any specific switches ?