similar to: Still VPN

Hello, I'm trying to set up port forwarding in IPTABLES and so far it's working great from the internet, but when I attempt from my internal LAN using the External IP address, it fails. EXTIF="eth0" INTIF="eth1" EXTIP="xxx.xxx.xxx.xxx" INTNET="192.168.1.0/24" INTIP="192.168.1.1" PORTFWIP="192.168.1.13" >From the internet,

Hello. I'm moving from a very old Fedora Core 1 to CentOS 4.4, what a change!! Three year ago, I wrote some script (network related) and worked very well. Now, I can put into init.d by means of chkconfig and I restarted the system, but always hang when executing my srcipt (in my new centos 4.4). There a manual for making scripts for init.d? there is some new requirement by which it does not

Hi there. I have followed some documents found here and there, but do not have already success implementing a script using iptables and iproute. What I need is to send all traffic trough an ADSL line, but mail trough an expensive and slow DS0. The mail server lies on the PC acting also as firewall. I include the script. When using that I get some error messages (I found that the flush command

Hi list, I am trying to create a VPN between two different locations. On the first location we have a cisco pix 525 Natting the internal 192.168.100.x network, while on the second location we have a Centos3 box Natting via iptables the internal 192.168.10.x netowrk. My goal is to connect this 2 over the internet via IPsec. I created the IPsec Net2Net via the network configuration graphic

ei tuka imam edin pf conf obache pravi mnogo nomera, kato se pusne parvoto koeto e dropva paketi, timeoutva po serverite i t.n.. i speed-a e mnogo baven, vijte ako nqkoi moje da otkrie generalna greshka da reply :) vapreki che ne e freebsd-specific :P ne sym go pisal az a i ne sam mnogo mnogo zapoznat s pf zatova ako nqkoi moje da pomogne e dobre doshyl :) btw moje i neshto ot tia opcii kato set

Hi all, I need a little help, i am studing htb to control user bandwidth (download/upload) and I made a script as below to test. I am testing using ttcp tool from by linux box to other linux (192.168.200.51). my box <---- Linux = more than 128kbit mybot -----> Linux = get 128kbit But I want to control both ways, what am I missing? script: EXTIF=eth0 INTIF=eth1 TC=/sbin/tc DOWN=128

I suppose a few questions pop up on this list about access Samba through a firewall. ?I have been very successful running Samba through a firewall, until today. ?I hit a stumbling block. I have a Linux Firewall with the public IP Address of 134.x.x.140 <it is not the exact ip address, but close>. ?I am using NAT and port forwarding to send traffic destined for 137, 138,139, and 445 for BOTH

Hi. I am trying to force some traffic that goes to address 203.7.93.94 through a VPN tunnel. I use freeswan 1.98b and Shorewall 1.4.6c in one machine. The 203.7.93.94 is in the DMZ on the other end. (Both ends use the same shorewall and freeswan). I have successfully set up a tunnel between the two network (using a point to point topology, not hub). I added a static routing that redirect

Easy question here: I have a test network that looks like this (apologies for my lack of ascii skills): [hostc]---------------[Firewall]192.168.42.1 (EXTIF: eth0) /10.0.0.1 (INTIF: eth1) 192.168.42.10 (wan) |(lan) | +-------------[hosta] 10.0.0.10 (port 4242) | +-------------[hostb]

Hello, I have a webcam that I wish to view from the internet. It is a wireless linksys model with an ip address of 192.168.1.15. I have it set on port 8081, 192.168.1.15:8081. I am using the IP Masquerade HowTo script. Here's the rule I added to my firewall script: EXTIF="ppp0" INTIF="eth1" EXTIP="`$IFCONFIG $EXTIF | grep inet | cut -d : -f 2 | cut -d \ -f

Hello! I am using shorewall shorewall-2.0.11-1 on fedora core2 (iptables-1.2.9-95.7). My box has 2 physical nic´s plus one virt. ipsec interface for a freeswan-vpn connection. A few days ago, portsentry spit out a lot of connections from windows clients (port 135, 445). Ooops. I review my shorewall settings but could not find a mistake. So I took a win-client and established a second

Hello, I am trying to get LDAP running. So far, the server is running but I cannot connect to port 389 or the server using webmin or phpldapadmin. It could be my ISP has blocked this port but I'm not sure. I have tried to telnet to port 389 but it is refused. All other services run fine. I user the iptables ruleset found in the IP-Masquerade HowTo. Below is the ruleset I follow for

Hello Gurus, I am a small problem with routing and here are the details. Interfaces on my server: * ipsec0 - 172.19.58.94 * tunl0 - 172.19.58.94 * eth0 - 172.19.58.94 Now, the problem is that there is another host 172.19.58.200. All communication to 172.19.58.200 should be through tunl0, and all the data should be secured using IPSec (tunnel mode - because there are more machines on my

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

Hi, Problem: I want 2 vpn tunnels for 2 subnets over one interface ipsec0. Documentation only describes config for 1 vpn or road warriors. I defined 2 vpn zones ''fre'' and ''swe''. #ZONE DISPLAY COMMENTS net Net Internet zone loc Local Local fre VPN_Fre VPN Fre swe VPN_Swe VPN Swe Interface ipsec0 is tunnel over eth1. Local is eth0. ipsec0 serves 2 zones: fre

Hello, it looks like the usual way to do ipsec on centos5 won't work anymore on centos6 I installed ipsec-tools but an interface type IPsec is not recognized by the kernel ifup ipsec0 Device does not seem to be present, delaying initialization. I am not planning to use the awful OpenSwan, I Want to sue the Kame implementation which was working fine on CentOS5 any hints ? thank you

I have just setup a VPN connection three sites using IPCOP. Everything seems to be talking ok, apart from browsing the network neighborhood. There are no NT/Win2K/XP servers running on any of the sites, all sites are just running win98 pc's using tcp/ip. I have tried configuring all PC's to be on the same workgroup and setup sharing, but still each site can only see the pc's

I am attempting to create an ipsec tunnel between two CentOS 5.1 systems, network-to-network with two different 192.168.xxx.0/24 LAN segments. I have gone through the documentation on the centos web site, and have the machines to the point where the /var/log/messages show ``IPsec-SA established'' on both machines after runnig ``ifup ipsec0'' (same ipsec0 on each machine). IP

Hi everyone. I am so baffled by the following problem: Office 1 is using ADSL and it is building a VPN tunnel with IPSEC to Office 2. Both ends are using shorewall/freeswan firewalls. Diagram: Office1 fw --- VPN TUNNEL --- Office2 fw --- cisco router ----- VLANS | DMZ Office 1 has the following interfaces: 2: eth0:

I just got the list confirmation and noticed it''s text only email so here it is again in plain text. Below is the oringal message. Hi all, I am really struggling with this one, I have built a lot of linux machines using IPSEC tunnels and shorewall gateways. I decied to build a new test machine with Debian running 2.4.25 and Shorewall 2.0.15. I have two subnets on their own switches and